|
| 1 | Installation of Low/Mini Mast Lights |
| 2 | Supply installation testing and commissioning of Octogaonal Pole made of hot dipgalvanised GI sheet 70mm top diameter. 130mm bottom diameter thickness 3mmbase plate dimensions of 200x200x16mm suitable for windspeed as per IS 875 PartIII fixed head frame including round arm luminary carriage suitable to install 4/6 nosluminaries in symmetrical arrangement including connector foundation bolt 4 nosexisting RCC foundation and junction box etc, complete 8 Meters |
| 3 | Supply, conveyance, installation, testing and commissioning of 150 Watts singlepiece LED Flood light fittings suitable for roadway installation with pressure die castaluminium housing with corrosion resistance powder coating using Nano technology,natural cooling system,, Poly Carbonated UV treated diffuses for higher impactstrength and optimum light transmission, High efficient driver with short circuit, overvoltage, over current and thermal protection, Surge protection up to 5 K V, PF 0.95,IP 65 protection, Horizontal Pole Mounting type fittings with all connectedaccessories fixing on the existing arm and giving connections with 1.5 sq. mm 3 corePVC insulated and PVC sheathed copper conductor fles wire etc. as required TheLED fittings shall be guaranteed for 3 years from the date of commissioning from anydefects in manufacturing. Any of the spares / components which are found to bedefective during this period shall be replaced immediately at free of cost. (Make:Philips/ Compton/ Havells )-150 Watt Flood light |
| 4 | Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing ofsides lift upto 1.5 m, including getting out the excavated soil, refilling with sand andor good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering anddisposal of surplus excavated soil as directed, within a lead of 50 metres |
| 5 | Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6graded stone aggregate 40 mm nominal size) in foundation of pump, DG set etc.including form work etc. as required |
| 6 | Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of HighMast/Mini Mast/DG set etc. including form work etc. as required (including reinforcement) |
| 7 | Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels. |
| 8 | Supply, conveyance and erection of the following sizes of 'B' class GIpipe in single section for post top lantern of all types on concrete base (excludingcharges for concrete base and excavation) and painting with 2 coats of syntheticenamel paint over a coat of zinc chromate primer etc. as required.50 mm dia GI pipe |
| 9 | Supply and drawing the following sizes of multi-core PVC insulated & FRLSPVC sheathed 650/1100 V grade copper conductor round flexible cables conformingto IS 694 part I 1960 in the existing surface / recess conduit as required includinggiving necessary connections of the following sizes.4 core 2.50 sq mm |
| 10 | Supply & laying of one number PVC insulated and PVC sheathed armouredaluminium power cable of 1.1KV grade of the following sizes in ground includingexcavation of trench of size 35 x 75 cm, refilling the trench etc. as required butexcluding sand cushioning and protective covering (in ordinary soil).2 core 10 sq mm |
| 11 | Supply & laying of DWC pipe in ordinary soil 0.75m below ground levelincluding excavation50/38 mm or nearest size |
| 12 | Supply and drawing bare earthing conductors of the following sizes along withwiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG) |
| 13 | Supply and clamping the following size of strips on surface of wall/ parapet/ existingcable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy dutyGI spacer saddles spacing of clamps not exceeding 1 m, making good the damages,colour washing etc. as required ( for horizontal run)20 x 3 mm GI strip |
| 14 | Supplying and making end termination with brass compression gland and aluminiumlugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductorcable of 1.1 KV grade as required.2 X 10 sq. mm (19mm) |
| 15 | 32/63 A fuse holder for BS type blade fuses |
| 16 | 32/63 A, 230 V, DIN type fuse base |
| 17 | 32/63 A, 415 V, 2 way neutral link mounted on DMC/ SMC base. |
| 18 | Supply and providing Single dial timer unit analog type with contactor and relay |
| 19 | Fabrication, supply & installation of dust and vermin proof, wall mounting,Sintex make Code No 3525 meter box suitable for fixing KSEB meter,fuse units,hinged door construction for the front side with compartments if necessary, providingvision panel for the meter compartment, knock out for cable entry and exit |
| 20 | Preparation of all drawing submitting and approvel from KSEB, obtaining powerallocation, submitting of completion certificates and arranging inspection, gettingsanction and energisation certificates from KSEB and obtaining power connection(single phase connection) etc: for commissioning of the whole installation in thepermises. |
| 21 | Supply and providing pipe earthing as per IS 3043 with 2.6 m long 40 mmdia Bclass GI pipe,GI funnel with weld mesh,filling required quantity ofcharcoal&:salt including construction of1:4:8 PCC using 40 mm brokenstone(10 cm thick) brick work in mortar1:6,plastering the surface of brick masonaryand the exposed surface of PCC bed with cement mortar1:4:12 mm thick(the finishedinside dimension shall be 300X300X300. |
| 22 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,miniature circuit breaker suitable for inductive load of following poles in the existingMCB DB complete with connections, testing and commissioning etc. asrequired.Single pole |
| 23 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existingMCB DB complete with connections, testing and commissioning etc. as required.40amps |
| 24 | Supplying and fixing following rating, double pole, (single phase and neutral), 240volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. asrequired.25 amps |
