|
| 1 | DESCRIPTION OF ITEMS |
| 2 | Chair Verandah (Officer) (FD/E6/MAP/06) a) M&L for derusting denting of frame to chair verandah applying minor welding wherever required and painting with two coats of white synthetic enamel paint over a coat of red oxide complete all as specified and directed by Engr-in-Charge. |
| 3 | b) Taking out and removing old U/S worn out PVC Seat and Back & Supply of Fix new PVC Seat and Back of4mm of weight not less than 1.85 kgs and grooves 90x10mm ten in nos on Seat and back of Chair Varandah of Make- AMCO/Cello/Brite |
| 4 | c) Removing old U/S rubber shoes and S&F new rubber shoes complete all as specified and directed by Engr-in-Charge. |
| 5 | Charpoy IP Steel PlyTop (FD/MAP-II/01) :Removing of old U/S and broken existing 12mm thick commercial plywood from Charpoy IP Steel PlyTop and supply and fix new 12mm thick BWP plywood as per existing shape and size ofMake- Archidply/Century Ply /Greenplyfixed to charpoy IP Steel PlyTop with suitable size of steel nut & bolt withwasher. |
| 6 | Welding of broken existing MS tube stiffners to the long rails before fixing of ply top with frame of charpoy MS ply top duly painted with two coats of synthetic enamel paint over a coat of red oxide primer to match the existing shadecomplete all as specified & directed by Engr-in-charge. |
| 7 | S&F in repair MS tube stiffener of size 25x25mm x 16 G square shape fit to long rails as per requirement including welding to long railsof charpoy MS ply top duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed. |
| 8 | S&F in repair MS cleat of size 25x60x6mm fit to short rails as per requirement including welding to short railsof charpoy MS ply top duly painted with two coats of synthetic enamel paint over a coat of red oxide primer to match the existing shade complete all as specified & directed by Engr-in-charge. |
| 9 | S & F hard rubber shoes as per drg and as directed by Engr-in-Charge. |
| 10 | M&L for derusting denting of frame of Charpoy IP Steel PlyTop by applying minor welding wherever required and apply black synthetic enamel paint complete all as specified and directed. |
| 11 | Computer Chair MAP (FD/E6/MAP/01) Supply and fixing of Hydraulic system of suitable size and design as per original Pattern including dismantling of old unserviceable one complete all as specified and directed. |
| 12 | S & F in repairs of handles of chair revolving made of blackintegeral skin polyurethane reinforced with MS insert scratch proof complete for chair computerwith arm rest all as shown on drg and as directed by Engr-in-Charge. |
| 13 | S & F in repairs of twin wheel castorsfor chair computer rest all as shown on drg and as directed by Engr-in-Charge. |
| 14 | Supply and fixing of wheel base including five Nos. of castor wheels to chairs revolingas per original Patternincluding dismantling of old unserviceable one complete all as specified and directed. |
| 15 | S & F in repairs of PUseat & back duly upholstered with best quality Acrylic/polyester fabric complete for chair computer rest all as shown on drg and as directed by Engr-in-Charge. |
| 16 | Table Bed Side MAP (FD/E6/MAP/15, FD/E6/MAP/15(R))Removing of old unserviceable ply wood and provision of new ply wood 6mm thick, BWP fixed on back side of table, size as shown on drawing, ISI marked Complete all as shown in drgs andas directed. |
| 17 | Removing of old U/S sides of table bed side and S& F of new sides made of 18/19mm thick pre-lamininated MDF board all as shown on drg and as directed. |
| 18 | Removing of old unserviceable telescopy channel andfixing ofnew telescopic channel of Make- Ebco/Hettich/Rinox for smooth movement of drawer. |
| 19 | Removing of old broken handle and S &F New handle Chromium plated 4\"\" handle, Make-Ebco/Hettich/Rinox shall be provided to each drawer. |
| 20 | Removing old U/S rubber shoes and S&F new rubber shoes complete all as specified and directed by Engr-in-Charge. |
| 21 | Preparation of old/new wooden exposed surfaces & MS Pipe by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish on Plywood surface & one coat of black synthetic enamel paint on MS Pipe Complete all as shown in drgs andas directed. |
| 22 | Taking out old unserviceable top of table bed side and S&F new top made of prelaminated MDF board exterior grade 18 mm thick one side decorative teak finish and other side balancing white (Archid/Green lam/Century)of required size and shape as per existing drawing including 0.6 mm thick PVC Edging all round the top of table bed side all as specified on drg and directed. |
| 23 | Removing the existing unserviceable bottom of Top drawer of table bed side and providing new bottom made out of 06 mm thick commercial BWP ply complete all as specified on drawing or as directed by Engineer-in-charge. |
| 24 | Removing the existing unserviceable sides of Top drawer of table bed side and providing new sides made out of 12 mm thick BWP ply complete all as specified on drawing or as directed. |
| 25 | Removing the existing unserviceable front of Top drawer of table bed side and providing new front made out of 18 mm thick both side prelaminated MDF Board complete all as specified on drawing or as directed by Engineer-in-charge. |
| 26 | Removing the existing unserviceable bottom of Lower drawer of table bed side and providing new bottom made out of 06 mm thick BWP ply complete all as specified on drawing or as directed by Engineer-in-charge. |
| 27 | Removing the existing unserviceable sides of Lower drawer of table bed side and providing new sides made out of 12 mm thick BWP ply complete all as specified on drawing or as directed by Engineer-in-charge. |
| 28 | Removing the existing unserviceable front of Lower drawer of table bed side and providing new front made out of 18 mm thick both side prelaminated MDF Board complete all as specified on drawing or as directed by Engineer-in-charge. |
| 29 | Chair Writing MAP (FD/E6/MAP/12)Repairing of existing loose welding point wherever requiredby spot welding and make it functional in Chair writing MAP. |
| 30 | Taking out the existing old Seatfrom the chair and S & F new Seatcomplete all as specified and directed by Engr-in-Charge. |
| 31 | Taking out the existing oldBack complete from the chair and S & F newBack complete all as specified and directed by Engr-in-Charge. |
| 32 | M&L for drestuing and preparing old exposed steel surfaces of Chair Writing MAP and applying one coat of synthetic enamel paint black with spray machine complete all as specified and directed by Engr-in-Charge. |
| 33 | Rack Shoes steel (FD/E6/MAP/02(R))M&L for drestuing and preparing old exposed steel surfaces of conduit frame and applying one coat of synthetic enamel paint black with spray machine complete all as specified and directed. |
| 34 | Repairing of existing loose jali by spot welding and make it functional complete all as specified and as directed. |
| 35 | Removing old unsv rubber shoes and S&F new rubber shoes each Rack shoes steel all as specified and directed by Engr-in-Charge. |
| 36 | Charpoy IP Folding (FD-388(R))Removing of old U/S and broken existing 12mm thick commercial plywood from Charpoy IP Steel Ply Top and supply and fix new 12mm thick BWP plywood as per existing shape and size of Make- Archidply /Century Ply/Greenplyfixed with charpoy with suitable size of screws and washer, in two pieces to facilitate charpoy to be folded complete all as shown in drgs andas directed by Engr-in-Charge. |
| 37 | M&L for derusting denting of frame to Charpoy IP Folding applying minor welding and synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 38 | Removing old unsv rubber shoes and S&F new rubber shoes all as specified and directed. |
| 39 | Chair School with hand board (FD/E6/MAP/05) Removing of old U/S hand board of prelaminated particle board and S&F new pre-laminated MDF board with all round 1 mm thick PVC beading as per drawings. |
| 40 | Removing of old U/S PVC seats(Seat and back complete) of Make- Supreme/Ballowal/Cello/Prince |
| 41 | Removing old U/S rubber shoes and S&F new rubber shoes complete all as specified and directed by Engr-in-Charge. |
| 42 | Repairing of existing loose jali by spot welding and making it functional complete all as specified and as directed. |
| 43 | Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coats of black synthetic enamel paintover a coat of red oxide primer. |
| 44 | Almirah steel Med (FD 67/1032)S & F following components of Almirah steel medincluding dismantling unservicable one all as specified and as directed(a) Lock brass 6 lever with duplicate keys of Make-Godrej/Link/Hettich/Harrison |
| 45 | (b) Handle 100 mm size chromium plated |
| 46 | S&F in repairs 3 way locking devicewith necessary fittings and painted with two coats of synthetic enamel paintof smoke grey color over a coat of red oxide primer, rest all as specified on drg and as directed. |
| 47 | S&F in repairs leg made of 1mm thick CRCA sheetduly welded/riveted and painted with two coats of synthetic emamel paint of of Silver hammer tone shadeover a coat of red oxide primer, rest all as specified on drg and as directed |
| 48 | S&F in repairsdoor shutters made of 1mm thick CRCA sheet 3 way locking device,key hole and painted with two coats of smoke grey color paint over a coat of red oxide primer inside and maroon hammer tone shade over a coat of red oxide primer outside after preparation of surface complete all as specified and shown on drawing, rest all as specified on drg and as directed. |
| 49 | S&F in repairsshelves made of 1mm thick CRCA sheetwelded/riveted and painted with two coats of synthetic emamel paint ofsmoke grey color over a coat of primer rest all as specified on drg and as directed. |
| 50 | Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required. Complete Internal surface of Almirah med steel with shelves shall be painted with two coats of smoke grey color paint over a coat of red oxide complete all as specified and as directed. |
| 51 | Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required. External three sides, Top, Bottom and legs shall be painted two coats of Silver hammer tone paint over a coat of red oxide whereas external surface of doors of Almirah med steel shall be painted with two coats of maroon colour over a coat of red oxide complete all as specified and as directed. |
| 52 | Almirah Steel Large (FD-1031,FD/E6/MAP/18)S & F following components of Almirah steel large including dismantling unservicable one all as specified and as directed(a) Lock 6 lever with duplicate keys of Make: Godrej/Link/Hettich/Harrison |
| 53 | (b) Handle 100 mm size chromium plated |
| 54 | (c) 3 way locking devicewith necessary fittings and painted with two coat of smoke grey color paint over a coat of primer. |
| 55 | Supply and fix leg made of 1mm thick CRCA sheetduly welded/riveted and painted with two coats of silver hammer tone paintover a coat of primer. |
| 56 | Supply and fixdoor shutters made of 1mm thick CRCA sheet 3 way locking device,key hole and painted with two coats of smoke grey color paint over a coat of red oxide primer inside and maroon hammer tone shade over a coat of red oxide primer outside after preparation of surface complete all as specified and shown on drawing, rest all as specified on drg and as directed. |
| 57 | (Supply and fixshelves made of 1mm thick CRCA sheetwelded/riveted and painted with two coats of smoke grey color paintover a coat of primer. |
| 58 | Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required. Complete Internal surface of Almirah med steel with shelves shall be painted with two coats of smoke grey color paint over a coat of red oxide complete all as specified and as directed. |
| 59 | Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required. External three sides, Top, Bottom and legs shall be painted two coats of Silver hammer tone paint over a coat of red oxide whereas external surface of doors of Almirah large steel shall be painted with two coats of maroon colour over a coat of red oxide complete all as specified and as directed. |
| 60 | Locker steel (FD-1029)S & F following components of Locker steelincluding dismantling unservicable one all as specified and as directed.(a) Handle 100 mm size chromium plated |
| 61 | (b) Hasp & staplechromium plated |
| 62 | S&F in repairs leg made of 1mm thick CRCA sheetduly welded/riveted and painted with two coats of silver hammer tone paintover a coat of primer. |
| 63 | S&F in repairs door shutters made of 1mm thick CRCA sheet 3 way locking device,key hole and painted with two coats of smoke grey color paint over a coat of red oxide primer inside and maroon hammer tone shade over a coat of red oxide primer outside after preparation of surface complete all as specified and shown on drawing, rest all as specified on drg and as directed. |
| 64 | S&F in repairsLock brass 6 lever with duplicate keys of Make-Godrej/Link/Hettich/Harrison of Locker Bed side steel. |
| 65 | S&F in repairs shelves made of 1mm thick CRCA sheetwelded/riveted and painted with two coats of synthetic emamel paint ofsmoke grey color over a coat of primer rest all as specified on drg and as directed. |
| 66 | Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required. Complete Internal surface of Almirah med steel with shelves shall be painted with two coats of smoke grey color paint over a coat of red oxide complete all as specified and as directed. |
| 67 | Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required. External three sides, Top, Bottom and legs shall be painted two coats of Silver hammer tone paint over a coat of red oxide whereas external surface of doors of Locker Bed steel shall be painted with two coats of maroon colour over a coat of red oxide complete all as specified and as directed. |
| 68 | Table dinning ORs steel (FD-165 (R)S & F following components of Table dinning ORs steelincluding dismantling unservicable one all as specified and as directed.(a) Leg/stiffener of MS square pipe duly welded to the frame including minor repairs to the table and painting the replaced portion with two coats of smoke grey paint over a coat of red oxide primer. |
| 69 | (b) Table top made of 18mm thick BWR plywood as per existing shape and size of Make- Archidply/Century Ply /Greenplycovered with 0.80 mm thick Aluminium Sheet all around . |
| 70 | Preparation of the old painted steel surfacesby scraping with emery paper, cleaning and applying two coat of synthetic enamel paint of smoke grey shade over a coat of red oxide primer, rest all as directed. |
| 71 | S & F new PVC shoe |
| 72 | Table office officer/clerk steel (FD-84/1003,1004 )S & F following components of Table office officer/clerk steelincluding dismantling unservicable one all as specified and as directed.(a) Drawer made of 1mm CRCA sheetincluding painting with two coats of synthetic enamel paint of silver hammer tone shade over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system. |
| 73 | (b) Leg/stiffener of MS square pipe duly welded to the frame and painted with two coats of synthetic enamel silver hammer tone shade paint over a coat ofprimer. |
| 74 | S & F new Lock of 6 levers with duplicate keys of Make-Godrej/Link/Hettich/Harrison |
| 75 | Side panel made of 1mm CRCA sheet including painting with synthetic enamel paint of silver hammer tone shade over a coat of primer both inside and outside including preparation of surfaces. |
| 76 | S&F in repairs top of Table office officer steel top with 18 mm thick Prelaminated MDF board exterior grade duly post formed in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on all sides with strong bonded chemical adhesive, rest all as shown on drg and as directed by Engr-in-Charge. |
| 77 | S&F in repairs top of Table office clerk steel top with 18 mm thick Prelaminated MDF board exterior grade duly post formedin Mohigini/Walnut colour/shade,as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on all sides with strong bonded chemical adhesive, rest all as shown on drg and as directed by Engr-in-Charge. |
| 78 | S & F new PVC shoe |
| 79 | Preparation of old painted steel sufaces of Table Office Officer Steel by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coats of silver hammer tone shade paint both inside and outside complete all as specified and as directed. |
| 80 | Preparation of old painted steel sufacesof Table Office Clerk Steel by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coats of silver hammer tone shade paint both inside and outside complete all as specified and as directed. |
| 81 | Rack steel 6 TierFD-129(M)/1038S & F following components of Rack steel 6 tier including dismantling unservicable one all as specified and as directed.(a) MS angle iron of size 30mm width x 3mm thick, 1905mm long including painting with one coat of synthetic enamel paint olive green shade of approved quality over a coat of primer. |
| 82 | (b) Shelves of size 760 x 915mm made of 1mm CRCA sheet including painting with one coat of synthetic enamel paint olive green shade of approved quality over a coat of primer. |
| 83 | Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth and applying two coat of synthetic enamel paint of olive green shade of approved quality. |
| 84 | Charpoy GI pipe (FD-220)S & F following components of Charpoy GI pipe including dismantling unservicable one all as specified and as directed. (a) Long rail made of 32 mm dia GI Tubing medium grade ISI mark 1.88 mtr long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow of charpoy.(Make : Jindal/Surya/Tata) |
| 85 | (b) 3 way 32 mm dia GI elbow ISI mark |
| 86 | (c) Check nuts of 32 mm dia |
| 87 | Conversion of 32 mm dia long rail obtained from item No 83.00 (a) above into two numbers short rail after cutting and threading both ends and fixing to 3 way 32 mm dia existing elbow. |
| 88 | Conversion of 32 mm dia short rail obtained from item No 86.00 above into two numbers leg including fixing to 3 way 32 mm dia elbow at one end threaded. |
| 89 | Reassembling/Tightening the loose components of frame including welding of broken existing MS flat iron stiffners to the long rails before fixing of ply top with frame of charpoy GI pipe ply top complete all as specified & directed by Engr-in-charge. |
| 90 | S&F in repair MS flat iron stiffener of size 35x5mm fit to long rails as per requirement including welding/fixing with nut and bolt of required size to long rails of charpoy GI pipe ply top duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed by Engr-in-charge. |
| 91 | Removing of old U/S and broken existing 12mm thick commercial plywood from Charpoy GI PlyTop and supply and fix new 12mm thick BWP plywood as per existing shape and size ofMake- Archidply /Century Ply/Greenplyfixed to charpoy GI PlyTop with suitable size of steel nut & bolt with washer. |
| 92 | Chair steel tubular with/ without arms (FD-75 M)S & F following components of Chair steel tubular with/ without arms made out of shisham wood painted with two coats of black paint over a coat of wood primer duly plastic canned in \"Godrej\" pattern with plastic cane 2mm width and borders with 4mm wide plastic cane fixed with screws 4 Nos and nuts to the chair frame complete all as per drawing. including dismantling unservicable one all as specified and as directed.(a) Seat frame |
| 93 | (b) Back frame |
| 94 | (c) Handle made of shisham wood painted with two coats of black paint over a coat of wood primer and fixed to the chair tubular with arms with screws of suitable size. |
| 95 | S & F MS Flatrail as per existing size of the chair ,thick welded at four corner to provide complete support to the seat and back and screwed with the seat or back at two places. Duly painted with smoke grey paint over a coat of red oxide. |
| 96 | S & F new PVC shoe |
| 97 | Preparation of old worn out surfaces of Chair Steel tubular with/without arms and painting with two coats of synthetic enamel paint smoke grey colour to chair steel tubular with/without arms 2 Nos of PVC caps on the top of the frame. |
| 98 | Chair Varandah (FD-256,359) Repair/replacement of broken Leg, each one piece made of MS conduit pipe 16G, 19mm dia including welding andprovidin one coat of red oxide primer all as per drg and as directed. |
| 99 | Welding joints of broken leg of 19/20mm MS tube & other joints as per drg |
| 100 | S & F new Hard rubber shoes as per drg |
| 101 | Painting to the entire frame including removing old unserviceable cane/plastic newar from seat & back of chair verandah and recaning the seat & back of complete chair including handles etc with approved 4mm white plastic caneas per Matt Pattern all specified on drawing or as directed by Engineer-in-charge. |
| 102 | Teapoy Varandah (FD-255/FD-35(M))S & F following components of Tepoy Varandah including dismantling unservicable one all as specified and as directed. Replacement of Topwith 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade,as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine, rest all as shown on drg and as directed by Engr-in-Charge |
| 103 | S & F new PVC shoe |
| 104 | Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of white synthetic enamel paint. |
| 105 | TableSteel 1520x860x760 (FD-1010)S & F following components of Table Steel 1520x860x760mm including dismantling unservicable one all as specified and as directed. Replacement of Top made with 18 mm thick Prelaminated MDF board exterior grade duly post formed in Mohigini/Walnut colour/ shade,as approvedwith 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on all sides with strong bonded chemical adhesive, rest all as shown on drg and as directed. |
| 106 | (b) Leg of size 740 mm long made out of 1.6 mm thick 32 mm square MS tube duly welded wherever required including one coat of two coat of silver hammer tone synthetic enamel paint over a coat of Red Oxide primer complete all as specified Drg. |
| 107 | S & F new PVC shoe |
| 108 | Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of two coat of silver hammer tone synthetic enamel paint complete all as specified. |
| 109 | TableSteel 900x900x760 (FD-1009)S & F following components of Table Steel 900x900x760 including dismantling unservicable one all as specified and as directed.Replacement of Top made with 18 mm thick Prelaminated MDF board exterior grade duly post formed in Mohigini/Walnut colour/ shade,as approvedwith 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on all sides with strong bonded chemical adhesive, rest all as shown on drg and as directed. |
| 110 | (b) Leg of size 740 mm long made out of 1.6 mm thick 25 mm square MS tube including one coat of silver hammer tone Synthatic enamel paint over a coat of Red Oxide primer complete all as specified Drg. |
| 111 | S & F new PVC shoe |
| 112 | Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of silver hammer tone synthetic enamel paintcomplete all as specified. |
| 113 | TableSteel 900x600x760 With Drawer (FD-167(M)/1008)S & F following components of Table Steel 900x600x760mm including dismantling unservicable one all as specified and as directed.Replacement of Top made with 18 mm thick Prelaminated MDF board exterior grade duly post formed in Mohigini/Walnut colour/ shade,as approvedwith 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on all sides with strong bonded chemical adhesive, rest all as shown on drg and as directed. |
| 114 | (b) Leg of size 740 mm long made out of 1.6 mm thick 25 mm square MS tube including two coat of silver hammer tone synthetic enamel paint over a coat of Red Oxide primer complete all as specified Drg. |
| 115 | c)Drawer with Locks 6 lever with keys in duplicate and making the drawer functional complete all as specified and as directed and as shown on drg.(Make : Godrej/Hettich/Link/Harrison) |
| 116 | S & F new PVC shoe |
| 117 | Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of silver hammer tone synthetic enamel paintcomplete all as specified. |
| 118 | TableSteel 900x600x760 Without Drawer (FD-167(M)/1007)S & F following components of Table Steel 900x600x760 without drawer including dismantling unservicable one all as specified and as directed.Replacement of Top made with 18 mm thick Prelaminated MDF board exterior grade duly post formed in Mohigini/Walnut colour/ shade,as approvedwith 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on all sides with strong bonded chemical adhesive, rest all as shown on drg and as directed. |
| 119 | (b) Leg of size 740 mm long made out of 1.6 mm thick 25 mm square MS tube including two coat of silver hammer tone synthetic enamel paint over a coat of Red Oxide primer complete all as specified Drg. |
| 120 | (c) PVC shoe |
| 121 | Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of silver hammer tone synthetic enamel paintcomplete all as specified. |
| 122 | Foam With/Without Back (FD-77 (M))S & F following components of Foam without Backincluding dismantling unservicable one all as specified and as directed.(a)Top Plank of Shisham Wood to be provided of the existing size with thickness 25mm applying raw/burnt seina uniformly and polishing with french polish one or more coat to obtain a glossy finishcomplete all as specified. |
| 123 | Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of OG synthetic enamel paint including minor repair works. |
| 124 | TableBed Side Steel (FD-157(M))S & F following components of Table Bed Side Steel600x380x760mm including dismantling unservicable one all as specified and as directed.(a) Top pre-laminated MDF board 18 mm thick one side teak shade and other side white shade and 2 mm PVC beading all round the top complete all as specified. |
| 125 | (b) PVC shoe |
| 126 | Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of silver hammer tone synthetic enamel paintcomplete all as specified. |
| 127 | Bed Hard Steel (FD/E6/MAP/08(R)): Removing of old U/S and broken existing 12mm thick commercial plywood from Bed Hard Steel PlyTop and supply and fix new 12mm thick BWP plywood as per existing shape and size ofMake- Archidply /Century Ply/Greenplyfixed to charpoy IP Steel PlyTop with suitable size of steel nut & bolt withwasher rest all as per drg and as directed. |
| 128 | S&F in repairs to head board of size 635 mm X 200 mm made from 18mm thick pre-laminated MDF board exterior grade both side decorative finish shade as approved complete including removal of damaged head board all as specified on drawing or as directed. |
| 129 | S&F in repairs to foot board of size 635 mm X 300 mm made from 18mm thick pre-laminated MDF board exterior grade both side decorative finish, shade as approvedcomplete including removal of damaged foot board all as specified on drawing or as directed. |
| 130 | S & F Hard rubber shoes as per drg and as directed by Engr-in-Charge. |
| 131 | Teapoy Varandah (FD/E6/MAP/17) Replacement of existing unserviceable table top for Teapoy verandahmade out of18 mm thick Prelaminated MDF board exterior grade in Mohigini/Walnut colour/ shade,as approvedwith 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on all sides with strong bonded chemical adhesive, rest all as shown on drg and as directed. |
| 132 | Repairing of existing loose/broken jali by spot welding and making it functional complete all as specified and as directed. |
| 133 | M & L for fixing of PVC shoes superior quality. |
| 134 | Preparation of old withered out painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of Black synthetic enamel paint complete all as specified. |
| 135 | Book Case steel S&F pane glasses ofrequired shape and size 3 mm thick for Book case steel complete including removal of broken pane glasses all as specified on drg and as directed by Engr-in-Charge. |
| 136 | Taking out of old unserviceable handle of book case steel & S&F new CP handle cast iron/zinc CP coated of Godrej pattern with new nut and bolts complete all as shown on drg and directed. |
| 137 | Taking out of old unserviceable locks of book case steel and S&F new locks of 40mm six lever of special type brass with new nuts and bolts key complete all as per drawing and directed. |
| 138 | Charpoy Double Bunk with hard Ply Top (CWE(H)/FD/385/04/16) Removing of old U/S and broken existing 12mm thick commercial plywood (either from upper berth or from lower berth) from Charpoy Double Bunk PlyTop and supply and fix new 12mm thick BWP plywood as per existing shape and size ofMake- Archidply /Century Ply/Greenplyfixed to charpoy Double Bunkwith suitable size of steel nut & bolt withwasher. |
| 139 | M&L for Welding broken joints of Double Bunk Charpoy Ply top, all as per drg & as directed. |
| 140 | Table computer (FD/R6/MAP/03 or similar) : Removing of existing unserviceable table top for Table computer and S&F new table top of existing made out of 18mm thick prelaminated MDF board with decorative finish one side and balancing white on the other side of exterior grade duly fixed to table frame with suitablescrews wood/steel with cup washer and 2 mm thick PVC beading on all round, rest all as shown on drg and as directed by Engr-in-Charge. |
| 141 | Removing of existing unserviceable Key Board tray from Table computer and S&F new Key Board tray of existing sizemade out of 18mm thick prelaminated MDF board with decorative finish one side and balancing white on the other side of exterior grade duly fixed to the existing Telescopic channel, rest all as shown on drg and as directed by Engr-in-Charge. |
| 142 | Removing of existing unserviceable Mouse tray from Table computer and S&F new Mouse tray of existing sizemade out of 18mm thick prelaminated MDF board with decorative finish one side and balancing white on the other side of exterior grade duly fixed to the existing Telescopic channel, rest all as shown on drg and as directed by Engr-in-Charge. |
| 143 | Removing of existing unserviceable damaged drawer from Table computer and S&F new drawer of existing size made out of 18mm thick prelaminated MDF board with decorative finish one side and balancing white on the other side of exterior grade duly fixed to the existing Telescopic channel, rest all as shown on drg and as directed by Engr-in-Charge. |
| 144 | Removing the existing unserviceable Telescopic channel from Table computer and S & F in repairs Telescopic Channel of suitable size for Key board tray/Mouse tray/Drawer of table computer and re-fixing the existing Key board tray/Mouse tray/Drawer with new telescopic channel of Make-Ebbco/Hettich all as specified on drawing or as directed by Engineer-in-charge. |
| 145 | Welding of broken existing Square MS pipe of Table computer duly painted with two coats of synthetic enamel paint over a coat of red oxide primer to match the existing shade complete all as specified & directed by Engr-in-charge. |
| 146 | S & F in repairs Nylon buffers of legs for table computer rest all as shown on drg and as directed by Engr-in-Charge. |
| 147 | Note : Tenderers may note that amount of credit Rs 58,808.00 will be deducted from the total amount arrived, at the time of Acceptance of contract. |
