|
| 1 | Supplying installation testing and commissioning of compact monoblock dry motor sewege submersible pumpshaving capacity 7.5HP,non-clogimpeller,solid handling capacity of100mm suitable for operation on 415 volts, 50 Hz A.C Three phase supply, speed 1450 RPM including oil chamber, M.S. galvanized lifting chain,Foot plate, Casing- CI, Impeller- CI, Shaft - 45C8i/c dismentling, disconnection, re-connection of cable &welding,earth wire testing, commissioning onload etc. complete as required at site etc.with followings Specifications: 1. Min. Capacity: 60 m3/hr2.Min.Head :12 M3.Model : KRTUPF 100-215/44, 5.5KW/7.5HP1450 rpm of KSB OR EQUIVALENT Make4. Solid handling capacity : 100mm5. IP 68,Insulation class F to IEC 34-16. Motor efficiency at full load not < 80% 7. Shaft seal: Double -acting mechanical. (K6RBS)8. Impellar type: Free flow (vortex) impeller, impeller dia 214 mm 9. Direction of rotation from drive: clock wise ,Bearing type: Anti-friction bearings,Lubrication type: Grease. 10.Lifting chain: Type- Chain, Material - galvanized MS, Minimum load handing capacity-150 KG., Ident-number- IN623057.11. Pump efficiency: not < 46%Also i/c following scope of supply:1. Each Pump set with 18 mtr. Copper cable (10 cores), along with foot plate.2. MS chain properlygalvanized 10 Mtr. in lenght capacity of lifting minimum 500kg weight from existing sewege tank (Note-at least 10mm dia with existing chain pulley arrangement. 3.To provide G.Inet /jal/protective cover(at least6 SWG) over the existing sewege pump set.The size of Net not more thyan 2.5X2.5 sqcm of each block and fixing with motor pump set by welding at suitable points to protect the pump set from sucking the cloths,mops,wire,etc.Minimum warrenty 1 Year (Note:-Dismantled motor &pmp set will be property of contractor & rate may be quoted accordingly). |
| 2 | Supplying installation testing and commissioning of compact monoblock dry motor Strom submersible pumps 1 No at Transport centre Panjabi Bagh having capacity 12.5HP, with non-clogimpeller,solid handling capacity of100mm suitable for operation on 415 volts , 50 Hz A.C Three phase supply, speed 1450 RPM including oil chamber, , M.S. galvanized lifting chain,Foot plate, Casing- CI, Impeller- CI, Shaft - 45C8i/c dismentling, disconnection, re-connection of cable &welding,earth wire testing, commissioning onload etc. complete as required at site etc with followings Specifications: 1.Min. Capacity: 127 m3/hr2.Min. Head :12 M3. Model : KRTUPF 100-260/74, 9.5KW/12.5HP1450 rpm of KSB OR EQUIVALENT Make4. Solid handling capacity : 100mm5. IP 686. Insulation class F to IEC 34-17. Motor efficiency at full load not < 80% 8. Shaft seal: Double -acting mechanical. (K6RBS)9. Impellar type: Free flow (vortex) impeller, impeller dia 256 mm , Direction of rotation from drive: clock wise , Bearing type: Anti-friction bearings,. Lubrication type: Grease.10. Lifting chain: Type- Chain, Material - galvanized MS, Minimum load handing capacity-350 KG., Ident-number- IN146070.11. Pump efficiency: not < 49%Also i/c following scope of supply:1. Each Pump set with 18 mtr. Copper cable (10 cores), along with foot plate.2. MS chain properlygalvanized 10 Mtr. in lenght capacity of lifting minimum 500kg weight from existing sewege tank (Note-at least 10mm dia with existing chain pulley arrangement. 3.To provide G.Inet /jal/protective cover(at least6 SWG) over the existing sewege pump set.The size of Net not more thyan 2.5X2.5 sqcm of each block and fixing with motor pump set by welding at suitable points to protect the pump set from sucking the cloths,mops,wire,etc.Minimum warrenty 1 Year (Note:-Dismantled motor &pmp set will be property of contractor & rate may be quoted accordingly). |
| 3 | Supplying installation testing and commissioning ofCRC sheet fabricated wall mounting type cubicle pattern control panel2 No\"s at DA Block Shalimar bagh, and 2 No\"s at C&D Block Shalimar Bagh as per pump protection devices suitable for 7.5 HP/5.5 kw pumpwith following specifications:Control Panel with Star Delta Starter, Main ON-OFF MCBsuitable size, 1 No. Voltmeter (0-500 Volt), 1 No. Voltmeter selector switch, 1 No- Ammeter ( 0-30 amp)1 Set phase indicating lamps1 No Auto Manual switch , 01- Dry run protection unit , 1 no- Single phase preventor, PPAC transformer for conversion 220 volt Ac to 12 volt AC for float switch, 1No High Temperature sensing protection devices, 1NO Moisture sensing protection, 01set Indicating lamp for- Low level of UG Tank, Pump On/Off for each pump, Over Load Relay,- Moisture sensing- High temperature etc andthe Control Panel will be suitable for operation as under:-1. Pump shall start/stop automatically. 2.In case of pump getting tripped, indication shall come on the panel., i/c dismentling, disconnection, re-connection of cable & earth wire testing, commissioning onload etc. complete as required at site.Minimum warrenty 1 Year |
| 4 | Supplying installation testing and commissioning ofCRC sheetfabricated wall mounting type cubicle pattern control panel1 No\"s at Transport centre Panjabi Bagh, as per pump protection devices suitable for 12.5 HP/9.5 kw pump with following specifications:Control Panel with Star Delta Starter, Main ON-OFF MCBsuitable size, 1 No. Voltmeter (0-500 Volt), 1 No. Voltmeter selector switch, 1 No- Ammeter ( 0-30 amp)1 Set phase indicating lamps1 No Auto Manual switch , 01- Dry run protection unit , 1 no- Single phase preventor, PPAC transformer for conversion 220 volt Ac to 12 volt AC for float switch, 1No High Temperature sensing protection devices, 1NO Moisture sensing protection, 01set Indicating lamp for- Low level of UG Tank, Pump On/Off for each pump, Over Load Relay,- Moisture sensing- High temperature etc andthe Control Panel will be suitable for operation as under:-1. Pump shall start/stop automatically. 2.In case of pump getting tripped, indication shall come on the panel,i/c dismentling, disconnection, re-connection of cable & earth wire testing, commissioning onload etc. complete as required at site..Minimum warrenty 1 Year(Note:-Dismantled motor &pmp set will be property of contractor & rate may be quoted accordingly). |
| 5 | Supplying installation testing and commissioning of Float Switch with complete accesseries, etc complete as required with each sewage submersible pump. |
| 6 | Supplying installation testing and commissioning of SS Chain Pulley BlockForLowering& Lifting Of 7.5Hp & 12.5 Hpmonoblock dry motor submersible pumps having load Lifting Capacity 0.5 Tons minimum etc complete as required with each sewage submersible pump. |
| 7 | Supplying ,Installation,testing& commissioning of 30 HP / 22 KW, 3 Phase, 1450 RPM, 50 Hz. AC supplyelectric driven centifugal clear water pump set with split casing type CI body and CIimpeller under bare shaft pump of 43 mtr. head at discharge with minimum 115 cubic mtr. Per hour,Existingsuction X delivery size 200 mm & 150mm and fixed on MS base frame as per manufactuter\"s recommendation with coupling & coupling guard, anti vibration pad, addition / alteration and making foundation in case of damaged foundationfor existing RCC foundation suitable for pump set i/c connection at suction side & delivery side i/cdismentling, disconnection of old motor pump set andre-connection of cable & earth wire testing, commissioning of new pump set etc. complete as required at site. Minimum warrenty 1 Year(Note:-Dismantled motor &pmp set will be property of contractor & rate may be quoted accordingly). |
| 8 | Supplying ,Installation,testing& commissioning of 30 HP / 22 KW, 3 Phase, 1450 RPM, 50 Hz. AC supplyelectric driven centifugal clear water pump set with split casing type CI body and CIimpeller under bare shaft pump of 43 mtr. head at discharge with minimum 115 cubic mtr. Per hour,Existingsuction X delivery size 150 mm & 100mm and fixed on MS base frame as per manufactuter\"s recommendation with coupling & coupling guard, anti vibration pad, addition / alteration and making foundation in case of damaged foundationfor existing RCC foundation suitable for pump set i/c connection at suction side & delivery side i/cdismentling, disconnection of old motor pump set andre-connection of cable & earth wire testing, commissioning of new pump set etc. complete as required at site. Minimum warrenty 1 Year (Note:-Dismantled motor &pmp set will be property of contractor & rate may be quoted accordingly). |
| 9 | Supplying and drawingsizes 3C X 6sqmm of FRLS PVC insulated un-armoured copperconductor cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 10 | Providing and fixingof size 32sq.mm G.I. pipes complete with G.I. fittings including trenching and refilling etc. |
| 11 | SITC of 3 HP 2900RPM 3Ph electric driven Monoblock clear water pump set with base frame,casing type CI body with CI impeller under bare shaft pump of 10-18 mtr. head range at discharge range 11.7-5.5 LPS, suction X delivery size 80mm X 65mm fixed on MS base frame as per manufactuter\"s recommendation compling guard anti vibration pad i/c testing commissioning onload etc. completion as required at site. |
| 12 | Supplying, fixing, testing & commissioning of doubleflanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked completewith nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :(Note:-Dismantled valve will be property of contractor & rate may be quoted accordingly). |
| 13 | 80mm dia |
| 14 | 100 mm dia |
| 15 | 150mm dia |
| 16 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required :(Note:-Dismantled NRV will be property of contractor & rate may be quoted accordingly). |
| 17 | 80mm dia |
| 18 | 100 mm dia |
| 19 | 150mm dia |
