|
| 1 | Electrical work |
| 2 | 75 inches Smart BoardSpecifications :-Android-12, RAM-4GB, ROM 32GB, Visual ratio-16:9, Resolution-3840x2160, Pixel Pitch-0,372x0,372 mm, Toughened Glass-Anti-Grade, 8 Moths, Brightness-350 nits, Light Source-DLEDSpeaker-16Wx 2., Touch Point-20 nos, CPU-Octa Core, WIFI-Inbuilt.,Device Management Software -Inbuilt, Wall Mount Kit, Remote Control, Stylus |
| 3 | Wiring for light point / fan point / exhaust fan point / call bell point with 1.50 Sq. mm FRLS PVC insulated copper conductor single core cable in Existing surface / recessed steel PVC conduit,, suitable G I box and earthing the point with 1.50 sq. mm FRLS PVC insulated copper conductor single core as earth wire in Existing surface / recessed steel PVC conduit including dismantlingas required. |
| 4 | S & F sheet steel enclosure surface/Flush mounting fitted with 30Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respect. as directed at site by Engineer in charge. |
| 5 | Supply and Insttalation of Split Type A.C. suitable for opration of AC supply 230 volt with harmeticaly siled with aircooled condensor moter capacitor and start run capacitor relay and over load protection internal unit with one indooe & one outdoor unit the condersor unit will be placed outside the room on tarrace awoid the noise including standered lenth of copper tubing covered with insulation tube. suitabl capacity 3 core copper cable and a bettery oprated remote. 2 TR BEE star rated 5 star EER 3.4 ( Invertor Technology ) |
| 6 | M.S. Stand for out door unit with Paint |
| 7 | S/L of Drain pipe 2.5mm with insulation |
| 8 | Supply and fixing of LED Tube Light with Metal heavy duty Box type batten light fitting 1 x 22 Watt suitable for upto 1 X 22 W LED Polycarbonate tube light complete including tube etc. on surface complete in all respects. CAT: AAA, 2420 system lumens, 110 lm/W, PF>0.95,THD<10% at full load, CRI>80, Tube with aluminium heat with 5 year warranty. |
| 9 | Supply and fixing of recess / surface mounting round 36 to 46Watt cut out min 150 mm, Height Min 40 mm, LED Down lighter having with heat sink, diffuser die cast aluminium housing with heat sink, diffuser/Reflector and driver set, suitable for 24 Hr. Continuous Operation, complete in all respect. CAT: AAA, 1980 - 2200 system lumens, 110 lm/W, PF>0.95, THD<10%, at full load, CRI>80, with 5 year warranty. |
| 10 | Supply and fixing of Following way , surafce / recess,Vertical type ,415 v TPN MCB distribution board of sheet steel , dust protected duly powder painted , including of 200 a tinned copper bus bar , comman neutal link , earth bar , din bar for mounting MCBsetc4 way(4+12) Double door |
| 11 | Supply ofCeiling fan 1200 mm sweep, Double ball bearing , Capacitor type ISI marked / Fivestar complete etc. Usha / Crompton/ Bajaj / Khaitan |
| 12 | Civil work |
| 13 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. |
| 14 | Supply & Fixing of Sign Board |
