Tender For Construction Of Office For The Icds Project Thoubal And Compound Fencing With Gate., Thoubal-Manipur

TDR : 48860107

Tender Notice
BOQ

Expired

Thoubal , Manipur

Tender Brief : Tender For Construction Of Office For The Icds Project Thoubal And Compound Fencing With Gate.

Document Fees
₹ 10000 /-

EMD
₹ 364000.0 /-

Tender Value
₹ 1.82 Crore /-

Submission Date
15-05-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	EARTH WORKS
2	Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
3	All Kinds of Soil
4	Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
5	Supplying and filling in plinth with sandy soil under floors including watering, ramming, consolidating & dressing complete.
6	CONCRETE WORKS:
7	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level:
8	1:4:8 (1 Cement:4 coarse sand:8 graded stone aggregate: 40 mm nominal size)
9	1:5:10 (1 Cement: 5 coarse sand:10 graded stone aggregate: 40 mm nominal size)
10	Providing & laying damp-proof course 50 mm thick with cement concrete cement concrete 1 : 2 : 4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size)
11	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth
12	R.C.C. Work
13	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level:
14	1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
15	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
16	1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
17	R.C.C. work in beams, suspended floors, roofs having slope uptp 15o landings, balconies, shelves, chajjas,lintels, band, plain window sills, staircases and spiral staircases above plinth level upto floor fivelevel excluding the cost of centering, shuttering, finishing and reinforcement, with 1 : 1 .5: 3 (1 cement :1.5 coarse sand :3 graded stone aggregate 20 mm nominal size)
18	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
19	Thermo-Mechanically Treated bars
20	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
21	Thermo-Mechanically Treated bars
22	FORM WORK
23	Centering and shuttering including strutting,propping etc.and removal of form for :
24	Foundations, footings, bases of columns, etc. for mass concrete
25	Columns, pillars, posts and struts
26	Lintels, beams, plinth beams, girders, bressumers and sqm cantilevers
27	Suspended floors. roofs, landings, balconies and access platform, with water proof ply 12mm thick.
28	BRICK WORKS:
29	Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in:
30	Cement mortar 1:4 (1 cement : 4 coarse sand)
31	Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in
32	Cement mortar 1 : 4 (1 cement : 4coarse sand)
33	WOOD WORKS
34	Providing wood work in frames of doors, windows, clerestory windows and other frames.wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately
35	Local best quality Uningthou wood
36	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.
37	Local best quality Tolhao Wood
38	35 mm thick Shutters
39	Providing and fixing bright finished brass door latch with necessary screws etc. complete
40	250 x 16 x 5 mm
41	Providing & fixing bright finished brass Tower bolts (barrel type) with necessary screws etc. complete.
42	250x10 mm
43	Providing and fixing chromium plated brass handles with necessary screws etc. complete:
44	125 mm
45	STEEL WORKS
46	Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting. hoisting fixing in position and applying a priming coat of approved steel primer, includingwelding and bolted including special shaped washers etc.complete
47	Etoctric resistanco or induction butt welded tubes
48	Providing and fixing stainless steel ( Grade 304) railing made ofHollow tubes, channels, plates etc., including welding, grinding, buffinge polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
49	FLOORING:
50	Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shadecomplete.
51	Marble tiles (polished) Raj Nagar
52	18mm thick
53	Marble stone flooring with 18mm thick marble stone (sample Of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with
54	Raj Nagar Plain
55	Extra for prefinished nosing to treads of steps of marble stone.
56	Providing and fixing 1st quality ceramic glazed wall tiles conformingto IS : 15622 (thickness to be specified by the manufacture of approved make in alt colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (I cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
57	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption\"s less than 0.080/0 and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.
58	Size of Tile 600 x 600 mm
59	Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections, power pressed from M.S. sheet and galvanised with zinc coating of 120 gms/ sqm (both sided inclusive) as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm diax50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of25x25xO.55mm of required length with nuts and bolts of required size and the other end of the angle hanger fixed with intermediate G.l. channels 45x15xO.9mm running at the spacing of 1200mm centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre, shall be fixed in a direction perpendicular to Gil. intermediate channel with connecting clips made out of 2.64mm diax230mm long C.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/pattition with the help of rawl plugs at 450mm centre, with 25mm long drive-all screws @ 230mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishng to a flush finish of tapered and square edges of the board with recommended jointing compound,jointing tapes, finishing with jointing compund in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board,all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed. all complete as per drawings, and specification and direction of the Engineer in Charge but excluding the cost of painting with
60	12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part l,
61	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineerincharge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using selt drilling Iself tapping screws ot size (5.5x 55 mm) with EPDM seal,comptete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with
62	Precoated galvanised iron profile sheets 0.40 mm thick
63	Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts andnuts and or C.I. seam bolts and nuts, G.l. plain and bitumen washers complete
64	Ridges plain (500 - 600mm)
65	Gutter (600 mm over all girth),
66	Precoated galvanised iron profile sheets 0.40 mm thick
67	FINISHING:
68	12 mm cement plaster of mix 1:4 (1 cement:4 coarse sand).
69	(1 cement:4 coarse sand)
70	15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement:4 coarse sand).
71	1:4 (1 cement:4 coarse sand).
72	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade.
73	New work(two or more coats)over and including priming coat with cement primer
74	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface
75	Water thinnable cement primer
76	Finishing walls with textured exterior paint of required shade:
77	New Work(two or more coats applied @3.28ltr/10 Sqm)over and including base coat of water proofing cement paint [email protected]/10 sqm.
78	Applying priming coat:-
79	With ready mix pink or grey primer of approved brand and manufacture on wood work(hard and soft wood)
80	Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture to give an even shade.
81	Two or more coats on new work
82	Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaece to prepare the surface even and smooth
83	Construction of Toilet Block
84	Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m
85	All kinds of soil.
86	Filling availabte excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layerby ramming and watering, lead up to 50 m and lift upto 1.5 m.
87	Supplying and filling in plinth with sandy soil under floors including, cum watering,ramming consolidating and dressing complete.
88	CONCRETE WORK :
89	Providingand layingcement concretein foundation and plinth excludingthe cost of centering andshuttering in
90	1:4:8 ( 1cement:4 coarse sand:8 gradedstone aggregate 40mm nominal size)
91	1:5:10(1 Cement:5 coarse sand:10 graded stone aggregate: 40 mm nominal size)
92	Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (Icement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
93	Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth.
94	RCC WORK
95	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
96	1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
97	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level upto floor five level excluding cost of centering,shuttering, finishing and reinforcement
98	1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
99	Reinforced cement concrete work in beams, suspended floors,roofs having stope upto 15o 9 landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).
100	STEEL REINFORCEMENT
101	Reinforcementfor RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
102	a)Thermo-Mechanically Treated bars
103	Form Work
104	Centering and shuttering including strutting, propping etc. and removal of form for:
105	Foundations, footings, bases of columns, etc. for mass concrete
106	Lintels, beams, plinth beams, girders, bressumers ands cantilevers.
107	Suspended floors, roofs, landings, balconies and access
108	Columns, Pillars, Piers, Abutments, Posts and Struts.
109	BRICK WORK
110	Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in:
111	Cement mortar 1:4 (1 cement : 4 coarse sand)
112	Half brick masonry 2nd class (local 1st class) in cement mortar 1:3 (1 cement : 3 coarse sand) insuperstructure.
113	Cement mortar 1 : 3 (1 cement : 3 coarse sand)
114	Brick edging 7cm wide 11.4 cm deep to plinth protection with 1st class common burnt clay F.P.S. ( non- modular) bricks including grouting with cement mortar 1:4 (1cement:4fine sand)
115	WOOD WORK
116	Providing wood work in frames of doors, windows, clerestory windows and other frames.wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately
117	a) Local best quality Teak Wood
118	Providing and fixing panellod or panollod and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge..
119	a) Local best quality Teak Wood
120	35 mm thick shutters
121	Providing & fixing M.S. grills of required pattern to wooden frames of window etc with M.S. flats at required sparings & frames all round bars with round headed bolts & nuts or by srcews.
122	Plain grill
123	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. Complete
124	250x10 mm
125	100x10 mm
126	Providing and fixing aluminium handles, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete
127	125 mm
128	75mm
129	FLOORING
130	Providing and laying Vitrified tiles in floor in diffe rent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.080/0 and conforming to 19.15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will bo done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubbermallet for placing the tiles gently and easily.
131	Sizes of Tiles 600x600 mm (Double charged)
132	Providing and laying vitrified tiles in different sizes (thickness to be specefied by manufacture), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement motar 1:3 (1cement:3c/sand), jonting with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete.
133	sizes of tile 500x500 mm
134	Marble stone flooring with 18mm thick marble stone (sample Of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with
135	Raj Nagar plain
136	FINISHING
137	6mmcement plasterof mix :
138	1:3 ( 1 cement : 3 f/s )
139	15 mm cement plaster 1:3(1 cement : 3coarse sand)
140	15 mm cement plaster on rough side of single or half brick wall of mix
141	1:4 (1 cement: 4 coarse sand)
142	White washing with lime on new work (three or more coats ) to give an even shade.
143	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade
144	New work (two or more coats) over and including priming coat with cement primer:-
145	Applying one coat of cement primer of approved quality on wall surface :
146	finishing walls with Acrylic smooth exterior paint of required shade :
147	New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cemont paint applied @ 2.20 kg/ 10 sqm).
148	Painting with oil type wood preservative of approved brand and manufacture.
149	New work( Two or more coats)
150	SANITARY INSTALLATIONS
151	Providing and fixing white vitreous china water closet squatting pan
152	Orissa pattern.
153	580x410
154	Providing and fixing P.V.C. low level flushing cistern with manually controlled device ( handle lever ) conforming to IS: 7231, with all
155	10 litre capacity- white
156	Providing and fixing white vitreous china flat back or wall corner typeb lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
157	Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.
158	Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :
159	Flat back wash basin of size 630x450 mm
160	Providing and fixing grating for gully trap or Nahni trap.
161	Stainless stell
162	100 mm nominal diameter
163	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
164	Flexible pipe
165	40 mm dia.
166	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
167	Providing and fixing 610 x 20 mm Diplomat brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws
168	Providing and fixing soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws.
169	Providing and fixing 100 mm H.C.I. soil vent pipes.
170	Providing and fixing MS holder bat clamps of approved design to 100 mm HCI pipe socket i/c cost of cutting holes and making good the walls etc.
171	Providing and fixing 100 x 100 x 100 mm HCI branch of the required degree with access doors, insertion rubber washer 3 mm thick bolts and nuts complete.
172	Providing and fixing 100 mm HCI bend of the required degree with access door insertion rubber washers bolts and nuts etc. complete.
173	Providing and fixing 100 mm HCI plain bend of required degree.
174	Providing and fixing 100 mm HCI collar
175	Providing and fixing 50 mm H.C.I. soil vent pipes.
176	Providing and fixing MS holder bat clamps of approved design to 50 mm HCI pipe socket i/c cost of cutting holes and making good the walls etc.
177	Providing and fixing 50 x 50 x 50 mm HCI branch of the required degree with access doors, insertion rubber washer 3 mm thick bolts and nuts complete.
178	Providing and fixing 50 mm HCI band of the required degree with access door insertion rubber washers 3 mm bolts and nuts etc. complete.
179	Providing and fixing 50 mm HCI plain band of required degree.
180	Providing and fixing HCI traps with 100 mm inlet and 100 mm outlet of self cleaning design with HCI screwed down of hinged grating with or without vent arm complete i/c cost of cutting and making good the walls and floors
181	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
182	15 mm
183	20 mm
184	25 mm
185	32 mm
186	Making connection of GI distribution branch with GI main 25 mm to 40 mm diameter by providing & fixing Tees i/c cutting and threading the pipe etc complete.
187	Providing and fixing C.P. bib cock of superior quality. :
188	15 mm diameter ( ordinary)
189	Providing and fixing brass stop cock of superior quality.
190	15 mm diameter
191	Providing and fixing brass full way G.M valve with CI wheel of approved
192	25 mm diameter
193	32 mm diameter
194	Providing and fixing C.P. brass shower rose with 12.5 or 19 mm inlet :
195	100 mm diameter
196	Repainting G.I. pipes and fittings with white paint of approved quality
197	25 mm dia pipe
198	32 mm dia pipe
199	Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level.
200	2000 litres net capacity storage tanks
201	Construction of Compound Fencing
202	Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
203	All Kinds of Soil
204	Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
205	Cement concrete
206	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level:
207	1:4:8 (1 Cement:4 coarse sand:8 graded stone aggregate: 40 mm nominal size)
208	R.C.C.
209	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level:
210	1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
211	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
212	1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
213	R.C.C. work in beams, suspended floors, roofs having slope uptp 15o landings, balconies, shelves, chajjas,lintels, band, plain window sills, staircases and spiral staircases above plinth level upto floor fivelevel excluding the cost of centering, shuttering, finishing and reinforcement, with 1 : 1 .5: 3 (1 cement :1.5 coarse sand :3 graded stone aggregate 20 mm nominal size)
214	STEEL REINFORCEMENT
215	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
216	Thermo-Mechanically Treated bars
217	FORM WORKS
218	Centering and shuttering including strutting,propping etc.and removal of form for :
219	Foundations, footings, bases of columns, etc. for mass concrete
220	Columns, pillars, posts and struts
221	Lintels, beams, plinth beams, girders, bressumers and sqm cantilevers
222	BrickWorks
223	Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in
224	Cement mortar 1 : 4 (1 cement : 4coarse sand)
225	STEEL WORKS:
226	Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting. hoisting fixing in position and applying a priming coat of approved steel primer, includingwelding and bolted including special shaped washers etc.complete
227	Etoctric resistanco or induction butt welded tubes
228	Finishing
229	12 mm cement plaster of mix 1:4 (1 cement:4 coarse sand).
230	(1 cement:4 coarse sand)
231	15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement:4 coarse sand).
232	1:4 (1 cement:4 coarse sand).
233	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface
234	Water thinnable cement primer
235	Finishing walls with textured exterior paint of required shade:
236	New Work(two or more coats applied @3.28ltr/10 Sqm)over and including base coat of water proofing cement paint [email protected]/10 sqm.
237	Supplying and fixing galvanised steel barbed wire.weighing 9.38kg/100 m straining and fixing to any type of standard rails straining bolts i/c securing with and provision of galvanised mild steel wire, staples or steel pins etc as directed (Posts and struts of wood, concrete, steel and straining bolts shall be paid separately).
238	Construction of Main Gate
239	Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
240	All Kinds of Soil
241	Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
242	CONCRETE WORK :
243	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level:
244	1:4:8 (1 Cement:4 coarse sand:8 graded stone aggregate: 40 mm nominal size)
245	RCC WORK :
246	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level:
247	1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
248	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
249	1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
250	R.C.C. work in beams, suspended floors, roofs having slope uptp 15o landings, balconies, shelves, chajjas,lintels, band, plain window sills, staircases and spiral staircases above plinth level upto floor fivelevel excluding the cost of centering, shuttering, finishing and reinforcement, with 1 : 1 .5: 3 (1 cement :1.5 coarse sand :3 graded stone aggregate 20 mm nominal size)
251	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
252	Thermo-Mechanically Treated bars
253	FORM WORK :
254	Centering and shuttering including strutting,propping etc.and removal of form for :
255	Foundations, footings, bases of columns, etc. for mass concrete
256	Lintels, beams, plinth beams, girders, bressumers and sqm cantilevers
257	Columns, pillars, posts and struts
258	BRICK WORK :
259	Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in
260	Cement mortar 1 : 4 (1 cement : 4coarse sand)
261	Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting. hoisting fixing in position and applying a priming coat of approved steel primer, includingwelding and bolted including special shaped washers etc.complete
262	Etoctric resistanco or induction butt welded tubes
263	15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement:4 coarse sand).
264	1:4 (1 cement:4 coarse sand).
265	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface
266	Water thinnable cement primer
267	Finishing walls with textured exterior paint of required shade:
268	New Work(two or more coats applied @3.28ltr/10 Sqm)over and including base coat of water proofing cement paint [email protected]/10 sqm.
269	Providing Internal Electrification Installation.
270	Wiring for light point / Fan point / Exhaust Fan point / Call bell point with 1.5 mm. FR PVC insulated copper conductor single core cable in surface / recessed steel conduit with modular type switch modular plate, suitable G.I. box and earthing the point with 1.5 mm 2 FR PVC insluted copper conductor single core cable etc., as reqd.
271	Group - A
272	Group - B
273	Group - C
274	Wiring for twin control point with 1.5 sqmm FR PVC insulated copper conductur single core cable in surface/recessed steel conduit, 2 way modular type switch, modular plate suitable size GI box and earthing the point with 1.5 sqmm FR insulated copper conductor single core cable etc. as required.
275	Wiring for light pt/power plug with 4x4mm2 FR pvc ins. Cu.cond.s/c cable in surface /recessed steel conduit alongwith one no. 4mm2 FR pvc.ins.Cu.cond. s/c cable for loop earthing etc.as reqd.
276	Wiring for circuit/ Sub-main wiring along with earth wire with (the following sizes) of FR PVC insulated copper conductor single core cable in surface / recessed steel conduit etc. as reqd.
277	2x2.5mm2+1x2.5mm2 earth wire
278	2x4mm2+1x4mm2 earth wire
279	2x6mm2+1x6mm2 earth wire
280	Supplying Wiring in existing conduit
281	Supplying and drawing (following pait) 0.5sqmm FR PVC insulated copper conductor unarmoured telephone cable in the existing surface/recessed steel/PVC conduit reqd.
282	2 pair
283	TV Cable in existing conduit
284	Supplying and drawing Co-Axial TV cable RG-6 grade 0.7mm solid copper conductor PE insulated shielded with file tinned copper braid and protected in PVC sheath in existing surface/recessed steel/PVC conduit as reqd
285	S/F (following Modular type switch/socket) on the existing switch box i/c connectionetc.as reqd.
286	5/6 amps. Switch
287	2 way 5/6 amps switch
288	15/16 amp.s switch
289	3 pin 5/6 amps.socket outlet
290	6 pin 15/16 amps.socket outlet
291	Telephone socket outlet
292	TV antenna socket outlet
293	Supplying & fixing stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd.
294	S/F (following size/modular switch plate base and cover plate for modular switch in recess SSS as reqd.
295	1 or 2 module (75mmx75mm)
296	6 module
297	8 module
298	12 module
299	S/F 3 pin amp ceiling rose on the existing junction box/wooden box i/c connection etc. reqd.
300	Supply and fixing Bell Push Modular Type
301	Providing and Fixings (following capacity TP & N) dis-connection fuse switch unit inside the existing cubicle panel board with ISI marks HRC fuses including drilling holes in the cubicle panel board, making connection as reqd.
302	400 amp. T.P. & N
303	S/F (following way) single door pole & neutral, sheet MCCB distribution board, 240V on surface/recessed complete with tinned Cu.bus bar neutral bus bar, earth bar, din bar detachable gland plate, interconnection, phosphatized and power painted i/c earthing etc.as reqd. (But without MCB/RCCB/Isolator)
304	2+8way
305	S/F 5 amp. to 32 amp.rating 230V \"B\" series MCB for lighting and other load of (following pole) in the existing MCB DB complete with connection testing and commissioning etc.as reqd.
306	Single pole
307	S/F (following rating) double pole 240V isolator in the existing MCB DB complete with connection, testing and commissioning as reqd. (a) 63 amp.
308	63 amp
309	S/F bus bar chamber with 4 strips Cu. Bus bar length 900mm suitable suitable for 200 amp.capacity complete with all accessories i/c connection earthing the body etc.as reqd.
310	S/F 48\" (1200mm) A.C. ceiling fan complete with down rod, canopy, 3 (three) blades but without regulator etc as reqd. (Make Bajaj/ Usha or similar
311	S/F 305mm sweep exhaust fan complete with all accessories i/c connection etc as reqd
312	Supplying, Erection, testing and commissioning of (pre-wired) wall bracket/ceiling fittings of all sizes and shapes containingCFL/LED/W GLS lamps per fitting, complete with all accessories including connection etc. as required(havell,s /Bajaja/Phillips/Cromton).
313	Ceiling fitting (Surface) with 12/15 watt LED Lamp.

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Manipur Tenders

Construction Tenders

Fencing Work Tenders

Wire Fencing Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Office For The Icds Project Thoubal And Compound Fencing With Gate., Thoubal-Manipur

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Office For The Icds Project Thoubal And Compound Fencing With Gate., Thoubal-Manipur

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us