Tender For Painting And Repairing Of Building At Koshagar Mainpuri - Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 2 Repairs To Plaster Of Thickness 1, mainpuri-Uttar Pradesh

Tender For Painting And Repairing Of Building At Koshagar Mainpuri - Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P.brass, including painting of fittings and cutting and making good the walls and floors wherever required with With cement mortar 1:4 (1cement: 4 coarse sand) 3 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) 4 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) 5 20 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 coarse sand) 6 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(DSR 2023 13.80) 7 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 8 Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm 9 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufactur 10 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture 11 Providing and fixing at all height false ceiling of 4mm thick phenol bonded Bamboo Mat board (595x595mm) conforming to IS:13958- 1994 including providing and fixing of frame work made of GI angle 25x25x0.4 mm thick all around suitably fixed to wall with the help of dash fastener and hanger frame (600x600 c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3 mm thick for main member & 25x25x0.3 mm for cross member) connected to ceiling with 2.64mm GI wire and anchor fastener at every junction and also including cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-in-charge. 12 Providing and fixing at Bamboo Mat board conforming to IS:13958- 1994 for partition to frame by bucking or studding with screws etc. complete (4 mm thickness) 13 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter 14 Wiriing for light pointwith 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, Modular plate suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. DSR Ele 1.10.3 15 Supply and fixing of LED tube light with heavy duty metal box type bottom light fitting 2 x 22 watt etc. S.I. No. 23.09 of electric SOR 16 Supply and fixing of IP 20mid power SMD type LED 2 fee x 2 feet 36 watt to 46 watt indoor recess / surface mounting LED square fitting etc.S.I. No. 23.05 of electric SOR 17 Supply and fixing of IP 20 front lit mid power SMD type LED light, recess mounting round /square 12 watt to 15 watt etc. S.I. No. 23.06 of electric SOR

INR 944 /-

INR 160000.0 /-

INR 16 Lakhs /-