|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cms thickness (below or above ground level) complete all as specified and as directed by Engr-in-charge.Note: All demolition materials shall be removed from site and deposited out side Defence land by contractor athis risk and cost andno extra payment shall bemade for this removal. After removing of debris, site shouldbe clean and level as required and asdirectied by Engr-in-charge. |
| 2 | Demolition of brick work or stone masonary built in cement mortar including all quoins arches pillars etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and as directed by Engr-in-charge. |
| 3 | Material and labour for 75mm thick PCC 1:3:6 type C2 (Using 40mm graded stone aggregate)including finishing the surface even and fair complete all as specified and as directed by Engr-in-charge. |
| 4 | Material and labour for precast cement concrete block masonry with solid blocks type C1, 1:3:6 (Using 20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 5 | Material and labour for providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints) type C1, 1:3:6 (Using 20mm graded stone aggregate)and setting in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 6 | Material and labour for 100mm thick PCC 1:2:4 type B2 (Using 40mm graded stone aggregate) for floor including finishing the surface even and smooth with using extra cement complete all as specified and as directed by Engr-in-charge. |
| 7 | Material and labour for 75mm thick PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) for hard standing including finishing the surface even and fair complete all as specified and as directed by Engr-in-charge. |
| 8 | Material and labour for 50mm thick PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) for floor including finishing the surface even and fair complete all as specified and as directed by Engr-in-charge. |
| 9 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engr-in-charge. |
| 10 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 11 | Material and labour for rendering 15mm thick other than fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 12 | Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and as directed by Engr-in-charge. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-charge. |
| 14 | Material and labour for 25mm thick PCC (1:2:4), type B-0 (Using 12.5mm graded stone aggregate) as in flooring, rough finish surfaces for receiving top layer complete all as specified and as directed by Engr-in-charge. |
| 15 | Material and labour for vitrified ceramic tiles in dark shade/ light shade (square/rectangular) area of each tiles of size 600x600x8-10mm thick as in floors etc., set and jointed in neat cement slurry over and including 15mm thick screed bed of CM 1:6 and pointed in white/ coloured cement to match complete all as specified and as directed by Engr-in-charge. |
| 16 | All as per item No.15 here-in-before but as in wall skirting over and including 10mm thick rendering of CM 1:4 and pointed in white/ coloured cement to match complete all as specified and as directed by Engr-in-charge. |
| 17 | Material and labour for non-skid ceramic coloured tiles (square/rectangular) area of each tiles ofsize 400x400x7-8mm thick as in floors etc., set and jointed in neat cement slurry over and including 15mm thick screed bed CM 1:6 and pointed in white/ coloured cement to match complete all as specified and as directed by Engr-in-charge. |
| 18 | Material and labour for coloured designed chequered cement concrete tiles of a size 300x300x25mm thick with grey cement and pigment in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed of cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 19 | Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed by Engr-in-charge. |
| 20 | Material and labour for hardcore of gauge not exc 63mm of broken stone, deposited, spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engr-in-charge. |
| 21 | Material and labour for forming construction joint 30mm deep x 10mm wide filled with sealing compound, grade \"A\" complete all as specified and as directed by Engr-in-charge. |
| 22 | Material and labour for preparing of old chequered tile and paverblock surfaces/existing footpath by removing all the caked mud with wire brushes and cleaning surfaces with necessary acid and description not otherwise described and applying one coat of weather proof tile guard apex paint or equivalent of any colour complete all as specified and as directed by Engr-in-charge. |
| 23 | All as per item No.22 here-in-before applying one coat of weather proof tile guard apex paint or equivalent of any colour including one coat of alkali resistant primer complete all as specified and as directed by Engr-in-charge. |
| 24 | All as per item No.22 here-in-before but two coats of weather proof tile guard apex paint or equivalent of any colour complete all as specified and as directed by Engr-in-charge. |
| 25 | Material and labour for preparing new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed by Engr-in-charge. |
| 26 | Material and labour for preparing new plastered surfaces and applying three coats of white wash on surfaces of walls complete all as specified and as directed by Engr-in-charge. |
| 27 | Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified and as directed by Engr-in-charge. |
| 28 | Supply and fix for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-charge. |
| 29 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and as directed by Engr-in-charge. |
| 30 | Supply and fix for prepainted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws /J hooks and bolts as required complete all as specified and as directed by Engr-in-charge. |
| 31 | Supply and fix for prepainted galvalume aluminium zinc coating GI based plain steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/ J hooks and bolts as required complete all as specified and as directed by Engr-in-charge. |
| 32 | Dismantling posts or struts (wood, steel or RCC) any section post embeded in concrete, brickwork, masonery etc., including taking out embeded portion and making good disturbed ground complete all as specified and as directed by Engr-in-charge. |
| 33 | Supply and fix for mild steel work as in posts and strut in fencing including cutting tops to shape as directed drilling holes notching for wire etc., complete all as specified and as directed by Engr-in-charge. |
| 34 | Supply and fix for mild steel screw bolts (machine made) with hexogonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted withwashers and one hexogonal or square nuts 5 to 10mm dia and exc 5cm but not exc 10cm long complete all as specified and as directed by Engr-in-charge. |
| 35 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire complete all as specified and as directed by Engr-in-charge.Note: MS nuts bolts, round bars and flats etc., shall be measured and paid seperately under relavent items as supply only. |
| 36 | Supply in repair only 4mm dia GI chain link MS galvanisd fencing, any size or type complete all as specified and as directed by Engr-in-charge. |
| 37 | Supply only MS flat, round or square bars in available length confirming to Fe-410-W (Gde-E-250) including drilling holes notching for fixing nuts and bolts etc., complete all as specified and as directed by Engr-in-charge. |
| 38 | Repair to existing chainlink fencing including strengthing, tighting, and binding with new or old fencing post/ flat iron/ nut bolt etc., or necessary welding complete all as specified and as directed by Engr-in-charge.Note: Fencing post /flat iron /nut bolt etc., required as new item will be measured and paid seperately. |
| 39 | Supply and fix in repairs galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified and as directed by Engr-in-charge.Note: Each line wire to be measured. |
| 40 | Repair to existing galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining including strengthing, tighting, and binding with new or old fencing post /flat iron /nut bolt etc., complete all as specified and as directed by Engr-in-charge.Note: Fencing post /flat iron /nut bolt etc., required as new item will be measured and paid seperately. |
| 41 | Supply and fix in repairs concertina coil of gauge 2.6mm and using coil of 61 cm dia of approved make coil over MS angle brackets with barbed wire complete all as specified and as directed by Engr-in-charge. |
| 42 | Repair to existing concertina coil of gauge 2.6mm and using coil of 61 cm dia including strengthing, tighting, and binding with new or old fencing post/ flat iron /nut bolt etc., complete all as specified and as directed by Engr-in-charge.Note: Fencing post /flat iron /nut bolt etc., required as new item will be measured and paid supply only item. |
| 43 | Material and labour for two coats of synthetic enamel paints over a coat of red oxide zine chrome primer including prepration of new/ previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described complete all as specified and as directed by Engr-in-charge. |
| 44 | Material and labour for preparation of old painted surface of any description not otherwise described steel and iron surface over 10 cm width or girth and applying one coat of synthetic enamel paint of any colour complete all as specified and as directed by Engr-in-charge. |
| 45 | All as per item No.44 here-in-before but not exc 10 cm width or girth. |
| 46 | Material and labour for preparation of old decorated plsatered or unplastered surface of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc., and applying one coat of white washing complete all as specified and as directed by Engr-in-charge. |
| 47 | All as per item No.46 here-in-before but two coats of white washing on walls complete all as specified and as directed by Engr-in-charge. |
| 48 | Material and labour for two coats of cement based over a coat of priming plastered and other surfaced with alkali resistant priming paint including preparation of old surface after removal of existing treatment complete all as specified and as directed by Engr-in-charge. |
| 49 | Material and labour for preparation of old decorated surface of wall and applying one coat of cement based paint complete all as specified and as directed by Engr-in-charge. |
| 50 | Material and labour for preparation of existing treatment of walls and applying one coats of exterior emulsion apex paint (weather coat) complete all as specified and as directed by Engr-in-charge. |
| 51 | Material and labour for preparation of old painted plaster surface of any description not otherwise described for road kerb stone, concrete, stone, brick edging etc., surface over 10 cm width or girth and applying one coat of synthetic enamel paint of any colour complete all as specified and as directed by Engr-in-charge. |
| 52 | Material and labour for one coat painting lines, strips, dashes, arrows, letters, etc., on roads, pavements and the like exc 10cm wide with road marking waterbase paint, white or golden yellow complete all as specified and as directed by Engr-in-charge. |
| 53 | Material and labour in repairs for providing precast cement concrete louvres and jallies, type B0 1:2:4 (Using 12.5mm graded stone aggregate) 50mm thick (measured solid) including all mouldings but not excluding frame set in cement mortar 1:4 including dismantling existinglouvres and jallies complete all as specified and as directed by Engr-in-charge. |
