|
| 1 | Earth work excavation for foundation in all soils and sub-soils to full depth as may be directed except in hard rock requiring blasting with initial lead and lift etc., complying with standard specification as per SS 20 B. |
| 2 | Supplying and filling in foundation and basement with filling sand layers not more than 15 cm thick well rammed watered and not compacted complete complying with standard specification. |
| 3 | Plain Cement Concrete 1:4:8 using 40 mm HBG metal for basement and flooring layers not more than 15 cm thick including cost and conveyance of materials to site and all other labour charges including consolidation as per standard specification |
| 4 | Supplying and filling in foundation and basement with filling Well Gravel well rammed watered and not compacted complete complying with standard specification. |
| 5 | Supply and errection of Centering and Shuttering including necessary supports for plane surface using mild steel sheets of size 90 x 60 cm and 10 gauge stiffened, welded with steel angles and supported by casuarina props of 10 cm to 13 cm dia spaced at 75 |
| 6 | Supplying fabricating and placing in position mild steel or ribbed steel for all reinforced concrete works as per the design given includingcost of steeland binding wire and all other labour charges as per standard specification. |
| 7 | Reinforced cement concrete 1:1.5 :3 mixusing 20 mm HBG metal for all RCC items of works excluding cost of reinforcement and fabricating charges, centering and shuttering but including curingetc., as directed by the department officers as per standard |
| 8 | Brick work in CM 1 : 5 using country bricks ground moulded of size 23 x 11 x 7 cm including cost and conveyance of materials to site and all other labour charges as per standard specification. |
| 9 | Fabrication and supply of MS Window of any required size with three leaves outer frame made of 35 x 35 x 5 mm equal MS ‘L’ angle mullion section made of 35 x 35 x 5 mm equal ‘T’ section shtter frame made of 25 x 25 x 5 mm equal MS ‘L’ angle for horizontal |
| 10 | Fixing in position Mild Steel Double Leaf Door including Joineries and all other labour charges etc. complete as per standard specifications. |
| 11 | Paving the floor with scratch proof Ceramic Tiles of any colour andsize of 305x305x6mm laid in cement mortar 1:3 (one cement and three sand) 20mm thick and pointing with white cement using 0.4Kg/Sq.m. mixed with colouring pigments to suit the colour of the tiles in of all charges etc |
| 12 | Plastering in CM 1:3,mix using10 mm thick ,including cost and conveyance of all materials to site and all other labour charges including curing etc., as per standard specification. |
| 13 | Plastering in CM 1:5,mix using 12 mm thick ,including cost and conveyance of all materials to site and all other labour charges including curing etc., as per standard specification. |
| 14 | Weathering course concrete using best quality broken brick jelly of size 20 mm. uniform gauge in pure slaked lime ( no sand to be used ) over the RCC roof slab in the proportion of brick jelly to lime being 32 : 12 1/2 by volume and laid over in a single |
| 15 | Finishing the top of roof with one course of machine pressed tiles of size 20 cm x 20 cm x 2 cm of approved quality laid in cement mortar 1 : 3( one cement and three sand ) 12 mm. thick mixed with water proofing compound confirming to ISS by 2% weight |
| 16 | Painting in two coats over inner wall surface with approved quality of Oil bound distember with colour over one coat of pirming coat including cost and conveyance of all materials to site etc |
| 17 | Painting in two coats over outer wall surface with approved quality of Plastic Emulsion paint with colour over one coat of priming coat including cost of materials and labour charges etc. |
| 18 | Painting in two coats over steel door& window with approved quality of enamel paintpaint with colour over one coat of priming coat including cost of materials and labour charges etc. |
| 19 | Providing for Electrification arrangement |
| 20 | Wiring with 2x1.5sqmm(22/0.3) PVC insulated unsheathed SC. Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch inflush with wall,covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (For electronic regulator) (5 Points Per Coil)(S.D.No.22) |
| 21 | Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x l00 x 113 mm TW switch box for 5 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point.(S.D.No.36) |
| 22 | Supply and fixing of Tube Light fitting complete with guard suitable for lamp with 40 W bulb with PVC unsheated leads from terminal to the fitting (S.D.No.88) |
| 23 | Supplying and fixing of 28W CFL Bulb including all cost and conveyance to work site etc complete |
| 24 | Supply and Fixing of Fan including all cost etc.., SD 107 |
| 25 | Supply and run of 2 of 6 sq. mm ( 84/0.30) polythene insulated and PVC unsheeted S.C. Alu cable of 1100 V on 7/20 Gi bearerwirefor Service Connection Main (S.D.No.64) |
| 26 | Supply and fixing of 16 AmpsDPIC switch of 500V grade with Fuse and Nutralon suitable T.W. board with painting of suitable colour with PWD Earthing (SD No.142) |
| 27 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
