Tender For Rate Contract Of Lowering And Un-Lowering Of Motor Pumps Intube Wells And Open Wells Under Dn. Sujangarh
Tender Value
30 Lakhs
Estimated cost
Bid Submission
05 May 2025
0 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sujangarh → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Rate Contract Of Lowering And Un-Lowering Of Motor Pumps Intube Wells And Open Wells Under Dn. Sujangarh
BOQ
| Sl. No. | Item Description |
| 1 | Unlowering of submersible pump set along with lowering pipes with depth up to 120 mtr and submersible cable with safety from tube well, checking the pump set, transportation of pump set from tube well site to storeas direction,receiving repaired / new pump set from store/ divisional store , testing the same, transportation tosite and lowering back into tube well along with submersible cable, lowering pipes,specials etc and commissioning of the tube well. The job also includes cable jointing,checking of discharge of pump set,interconnection of lowering pipe from nearby distribution pipe line,checking of starter and reporting for completion of Job or fault/problem if any.(Upto 20 Km distance run by lowering machine) For three Phase pump set. G.I. Double Flanged Pipe Lowering Assembly of nominal dia.50 mm |
| 2 | 65 mm |
| 3 | 80 mm |
| 4 | HDPE Pipe Lowering Assembly of nominal dia63 mm |
| 5 | 75 mm |
| 6 | 90 mm |
| 7 | Add above item 1.1 for depth above 120 mtr for each 10 mtr depth |
| 8 | Add above item 1.1 for distance run above 20 Km for each 5 Km distance run. |
| 9 | For singlePhase pump set. G.I. Double Flanged Pipe Lowering Assembly of nominal dia.32 mm |
| 10 | 50 mm |
| 11 | HDPE Pipe Lowering Assembly of nominal dia.32 mm |
| 12 | 40 mm |
| 13 | 50 mm |
| 14 | Add above item 1.1 for depth above 120 mtr for each 10 mtr depth. |
| 15 | Add above item 1.1 for distance run above 20 Km for each 5 Km distance run. |
| 16 | Only unlowering of submersible pump set along with lowering pipes depth up to 120 mtr and submersible cable with safety from tube well, checking the pump set,reporting and transportation of pump set from tube well site to storeas per direction. For three phase pump set. G.I. Double Flanged Pipe Lowering Assembly of nominal dia.50 mm |
| 17 | 65 mm |
| 18 | 80 mm |
| 19 | HDPE Pipe Lowering Assembly of nominal dia.63 mm |
| 20 | 75 mm |
| 21 | 90 mm |
| 22 | Add above item 2.1 for depth above 120 mtr for each 10 mtr depth |
| 23 | Add above item 1.1 for distance run above 20 Km for each 5 Km distance run. |
| 24 | For singlePhase pump set. G.I. Double Flanged Pipe Lowering Assembly of nominal dia. 32 mm. |
| 25 | 50 mm |
| 26 | HDPE Pipe Lowering Assembly of nominal dia.32 mm |
| 27 | 40 mm |
| 28 | 50 mm |
| 29 | Add above item 2.1 for depth above 120 mtr for each 10 mtr depth |
| 30 | Add above item 1.1 for distance run above 20 Km for each 5 Km distance run. |
| 31 | Only lowering of the submersible pump setinto tube well along with submersible cable, lowering pipes depth up to 120 mtr,specials etc and commissioning of the tube well. The job also includes cable jointing,checking of discharge of pump set,interconnection of lowering pipe from nearby distribution pipe line,checking of starter and reporting for completion of Job or fault/problem if any. For three phase pump set. G.I. Double Flanged Pipe Lowering Assembly of nominal dia.50 mm |
| 32 | 65 mm |
| 33 | 80 mm |
| 34 | HDPE Pipe Lowering Assembly of nominal dia.63 mm |
| 35 | 75 mm |
| 36 | 90 mm |
| 37 | Add above item 3.1for depth above 120 mtr for each 10 mtr depth |
| 38 | Add above item 1.1 for distance run above 20 Km for each 5 Km distance run. |
| 39 | For singlePhase pump set. G.I. Double Flanged Pipe Lowering Assembly of nominal dia.32 mm |
| 40 | 50 mm |
| 41 | HDPE Pipe Lowering Assembly of nominal dia.32 mm |
| 42 | 40 mm |
| 43 | 50 mm |
| 44 | Add above item 1.1 for depth above 120 mtr for each 10 mtr depth. |
| 45 | Add above item 1.1 for distance run above 20 Km for each 5 Km distance run. |
| 46 | Increasing of lowering pipes intube wells including cost of nut bolts and rubber gaskets / jointing material and PVC rope and transportation of cable and extra lowering pipe from store.. However submersible cable and extra lowering pipe shall be provided by the department at store.For three phase pump set. For Increase 2 Nos. Assembly pipe. G.I. Double Flanged Pipe Lowering Assembly of nominal dia. 50 mm |
| 47 | 65 mm |
| 48 | 80 mm |
| 49 | HDPE Pipe Lowering Assembly of nominal dia. For Increase 20 Mtr. Assembly.63 mm |
| 50 | 75 mm |
| 51 | 90 mm |
| 52 | For singlePhase pump set. For Increase 2 Nos. Assembly pipe. G.I. Double Flanged Pipe Lowering Assembly of nominal dia. 32 mm |
| 53 | 50 mm |
| 54 | HDPE Pipe Lowering Assembly of nominal dia. For Increase 20 Mtr . Assembly. 32 mm |
| 55 | 40 mm |
| 56 | 50 mm |
| 57 | Add above item for depth above 20 mtr or two D/F pipe assembly for each 10 mtr depth. |
| 58 | Add above item for distance run above 20 Km for each 5 Km distance run. |
| 59 | Unlowering of pump set along with lowering pipes and submersible cable with safety from Open well For three Phase pump set having G.I double flanged/ HDPEpipe lowering asembly of size 50 mm to 80 mm, checking the pump set,reporting and transportation of pump set from tube well site to store. |
| 60 | Add above item for distance run above 20 Km for each 5 Km distance run. |
| 61 | Lowering of repaired/Newpump set alongwith lowering pipes and submersible cable with safety in Openwell For three Phase pump sethaving G.I double flanged/ HDPEpipe lowering asembly of size 50 mm to 80 mm. It includes receiving repaired / new pump set from store / Work shop with in boundry area of division and testing the same, transportation tosite and commissioning. |
| 62 | Add above item for distance run above 20 Km for each 5 Km distance run. |
| 63 | Minor and Major Repair of Hand Pump. Job Work for Successful Repairing of All type of Handpump without material. MinorRepair without unlowering and lowering of assembly pipes (Replacement or Repair of Chain, Handle, Handle Assembly, Water Tank, Bearing, Greasing etc.including welding and lathe work if any.) |
| 64 | Major Repair with unlowering and lowering of 32/ 50 mm GI pipes assembly including minor repair if any. Work also includes transportation of all material from store to work point and depositing unservicable material to store. Work can be done by lowering machine/ chain pulley/ any system. |
| 65 | Repair of handpump when pipe assembly is jammed/fallen in the bore and to be taken out with help of tripod and chain pulley block etc. |
| 66 | Removing abandoned handpump including dismantling of platform, cutting of casing pipe minimum upto 0.3 m depth below ground level , depositing taken out material to store, filling bore with stone or earth and surface dressing. |
| 67 | Deduct from item no 2.9 if relowering of assembly is not done. |
AI Tender Summary
Tender Timeline
Apr 24, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedMay 05, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 06, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender