|
| 1 | SITC of Horizontal type, self priming non clog sewage pump, single stage Pump, with CI Impeller, EN8 shaft & Sleeve, with suitable suction & Delivery LPM 1032 at 10 Mtr, Head up to 20 Mtr coupled with 3 phase Induction motor 5 HP, TEFC, 440 Volt, 1450 RPM with coupling guard, Base frame with AVM etc complete as required. |
| 2 | SITC of Horizontal type, split casing, single stage pump, with CI impeller, SS 410 shaft & sleeve, CI Body FG-260, with suitable suction and delivery 120 M3/hr, Head 25 Mtr coupled with 3 phase Induction motor 20 HP, TEFC. 440 Volt, 1450 RPM with coupling guard, Base frame with AVM etc. complete as required. |
| 3 | Supplyinstallation testing and commissioningof Electrical Horizontal centrifugalpump set with non clog /mf impeller to handle storm / mixed / sewage water with having min.discharge of 800 m3/hr at head min 7 mtr, RPM 750 - 990 having suction and delivery size 350 mm or 300 mm dia ,mounted on a common base frame coupled with Min. 40 HP or suitable rating (IE-2) three phase, TEFC AC , 415 volts, 50 Hz supply electrical Motor energy efficient (IE3) complete as required. Mounted on a commonbase frame as Casing C I, Impeller C I, Shaft& sleeve (SS) 40 C 8 complete with coupling guard and foundation bolts etc. as reqd. |
| 4 | S/I/T/Cof cubical type control panel board for three phase star delta starter,three position selection with auto switch for Mono submersible pumping set of following rating complete with single phasing preventer in auto, contactor (25Amp), O/L relay TP, MCB, Voltmeter, ammeter, VSS and indication lamp etc. including lamp etc. including connection etc. as required. (a) 10 H.P. rating Submersible Pump Set Over Load relay (range13-21 Amp) & Contactor (range 25 Amp). |
| 5 | S/I/T/C of cubical type control panel board for three phase star delta starter, three position selection with auto switch for Mono submersible pumping set of following rating complete with single phasing preventer in auto, contactor (40Amp), 0/L relay TP, MCB, Voltmeter, ammeter, VSS and indication lamp etc. including lamp etc. including connection etc. as required. - 20 H.P. rating Submersible Pump Set Over Load relay (range23-40 Amp) & Contactor (range 40 Amp) |
| 6 | S/I/T/C of fully automatic Auto Transformer Starter will be constructed / fabricated with 2 mm thick, MS sheet steel, dust & verminproof,drain & drip - proof, front operated, self supported, free standing type constructions andwill be duly spray painted sythetic Enamel paint of Light Grey shade 631 of IS:5 and accommodate all switch -gear items required to meet the technical requirements ofATS 50HP as listed below :- 1-FN 125 , 125 Amp. rating fuse Switch unit (SFU) in open execution.1 No 2-125Ampere HRC fuse 3pole , 415 V AC3 Nos. 3- 32 Ampere Type -MNX 32 , Power Contactor for Star.4- 70 Ampere Type-MNX 70, Power Contactor for Delta 1 No.5-80 Ampere Type-MNX 80, Power Contactor for Main 1 No. 6- Over load Realy MN5 (45-75 Amp.) rating range 1 No. 7 - ON-Delay Timer 3-30 Sec, I C/o Contact 1 No. 8- Push buttons with 1 No element for ON/OFF2 Nos. 9- Adequate rating oil immersed Auto Transformer having copper winding, class \"E\" insulation with taping 60%, 70%, 80%. 1 No(EE) 10 - Single phase preventer realy with under Voltage and over voltage or as suitable1 No. 11- Flush mounting tppe Ammeter 96 sqmm with Selector Switch suitable CT connection 1 No. 12 - Flush mounting type Voltmeter 96 sqmm with Selector Switch 1 No. 13- Indicating lamp for ON/OFF , Trip 03 Nos. RASS/Reputed 3 Nos. (With oil ) |
| 7 | Providing, laying , testing & commissioning of \"C\" class heavy duty MS pipe confirming to IS 3589/IS 1239 including welding fittings like elbows, tees, flanges, tapers, nut bolts, gaskets etc.andfixing the pipe on the wall/celing with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as reqd. (a) 80 mm dia |
| 8 | Providing, laying , testing & commissioning of \"C\" class heavy duty MS pipe confirming to IS 3589/IS 1239 including welding fittings like elbows, tees, flanges, tapers, nut bolts, gaskets etc.andfixing the pipe on the wall/celing with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as reqd. (b) 150mm Dia |
| 9 | (A) P&F / Replacement of M.S. Black pipe (9.5 mm thickness) confirming to IS:3589 with required nut bolts & packing sheet etc complete as required. 250 mm dia (9.5 mm thick) |
| 10 | P&F / Replacement of M.S. Black pipe (9.5 mm thickness) confirming to IS:3589 with required nut bolts & packing sheet etc complete as required 300 mm dia (9.5 mm thick) |
| 11 | P&F / Replacement of M.S. Black pipe (9.5 mm thickness) confirming to IS:3589 with required nut bolts & packing sheet etc complete as required 350 mm dia (9.5 mm thick) |
| 12 | P&F / Replacement of M.S. Black pipe (9.5 mm thickness) confirming to IS:3589 with required nut bolts & packing sheet etc complete as required450 mm dia (9.5 mm thick) |
| 13 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : (a) 80mm dia |
| 14 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : (b) 150mm dia |
| 15 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :(c) 250mm dia |
| 16 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : (d) 300mm dia |
| 17 | Replacement of Non rising spindle sluice valve of CI Body with wedge, bronze ring conforming to IS 14846 and SS IS 6603(ISI Marked) PN 1.6 complete as required : (a) SV 350mm |
| 18 | Providing, Installation, Testing & commissiong of Non Return Valve of of following sizes confirming to IS 5312 complete with Rubber gasket, GI bolts, Nuts, washers etc. as required : (A) 80mm |
| 19 | Replacement of swing type Non Return Valve of CI Body with Door, bronze to Rubber rings confirming to IS 5312 (Part 1 & 2), PN 1.6 complete as required :(B) NRV 150 MM |
| 20 | Replacement of swing type Non Return Valve of CI Body with Door, bronze to Rubber rings confirming to IS 5312 (Part 1 & 2), PN 1.6 complete as required :(C) NRV 250 MM |
| 21 | P/F/Replacement of swing type Non Return Valve of CI Body with Door, bronze to Rubber rings confirming to IS 5312 (Part 1 & 2), PN 1.6 complete as required : (D) NRV 300 MM |
| 22 | Replacement of swing type Non Return Valve of CI Body with Door, bronze to Rubber rings confirming to IS 5312 (Part 1 & 2), PN 1.6 complete as required : (E)NRV 350 MM |
| 23 | Providing and fixing of M.S. Bend with required nut bolts & packing sheet etc. complete as required of following Dia. (a) 250 mm (8 mm thick), length 0.5 m |
| 24 | Providing and fixing of M.S. Bend with required nut bolts & packing sheet etc. complete as required of following Dia. (b) 300 mm Short bend C Class |
| 25 | Providing and fixing of M.S. Bend with required nut bolts & packing sheet etc. complete as required of following Dia. (b) 350 mm Short bend C Class |
| 26 | Providing and fixing of M.S. Bend with required nut bolts & packing sheet etc. complete as required of following Dia. (a) 450 mm (10 mm thick), length 0.75 m |
| 27 | Providing and fixing of M.S. Flange with required nut bolts & packing sheet etc. complete as required of following Dia. (a) 250 mm (20 mm thickness) |
| 28 | Providing and fixing of M.S. Flange with required nut bolts & packing sheet etc. complete as required of following Dia. (a) 300 mm (25 mm thickness) |
| 29 | Providing and fixing of M.S. Flange with required nut bolts & packing sheet etc. complete as required of following Dia. (a) 350 mm (25 mm thickness) |
| 30 | Providing and fixing of M.S. Flange with required nut bolts & packing sheet etc. complete as required of following Dia. (a) 450 mm (25 mm thickness) |
| 31 | Providing and fixing of M.S. Blind Flange with required nut bolts & packing sheet etc. complete as required of following Dia. (a) 450 mm (25 mm thickness) |
| 32 | Providing & Fixing of MS reducer 150 mm x 300 mm, 10 mm thick, approx. 0.5 mtr length / required length at site, with suitable size , with suitable size nut, bolt, packing sheet etc, all as directed at site. |
| 33 | Providing & Fixing of MS reducer 300 mm x 200 mm, 10 mm thick, approx 0.5 mtr Bar Screen made out of MS Anglelength / required length at site, with suitable size , with suitable size nut, bolt, packing sheet etc, all as directed at site. |
| 34 | Providing & Fixing of MS Platform made out of MS Girder size 8\" x 4\" (200 mm x 100 mm) fixing in back sides and center supporting with MS angle iron size 50 x 50 x 6 mm with cross welding and fixing of MS chequred sheet of 7 mm thickness on top side of MS platform, back side platform duly welded MS railing with 2\" dia MS pipe with 3\"6\" height to be fixed at site. complete plate and railing duly Painted with enamel paints. (Quantity in Sq. Feet) |
| 35 | Providing & Fixing of MS Bar Screen made out of MS Angle size (75 mm x 75 mm) and center covered with MS Sq bar size 18 mm duty welded with center to center distance35 mm and dulywelded.Work also includes complete Bar Screen duly Painted with enamel paint. Bar Screen dulyfixed in sidewall using Mortar, tools and tackles etc complete as required.(Quantity in Sq. Feet) complete as required. |
| 36 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 37 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from electrode including cinnection with G.I. nut, bolt spring, washer excavation and re-filling etc. as required. |
| 38 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 39 | Supply,Installation, testing and commissioning of power distribution board made out of 1.6 mm sheet steel, epoxypowder coated , specially designed Al bus bar 400A to 630A with heat shrinkcable colour coated sleeves suitable for accommodating MCCBs/MCBs /Isolators as incoming and outgoing as required (without MCCBs/MCBs/Isolators ) complete with digital meter module, including Voltmeter Ammeter with selector switch, CTs control fuse and indicating lights including connections etc. as required ( Conforms to IS:8623) |
| 40 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminalspreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 125 A, 36KA,FPMCCB |
| 41 | 250 A,36KA,FPMCCB |
| 42 | 400 A,50KA,FPMCCB |
| 43 | On load change over switch 630 Amp, Open execution type 2 Nos. (one DG set and 1 for phase sequence), |
| 44 | Supply of corrugated & chequered rubber mat for electrical purpose exceeding IS: 5424/69 Black or red in 1 M X2 M of size. 25 mm thickness |
| 45 | Providing and fixing of 600 mm sweep Air circulator complete with blades, jaal workable on 220/240 volts AS Supply etc, as reqd. |
| 46 | Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-3.5C*120 sqmm |
| 47 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. upto 35 sq. mm |
| 48 | Dismantling of pump set of capacity up to 150 HP -no including piping arrangment, electric panel, starter and other accessories and loading the same in a vehicle and transporting at timarpur store and uploding by using crane and skilled labour and keeping in safe custody for re-using at site, the electrical connection of all equipement, tranportation, tools and tackles such as tripod arrangment of crane, skilled laour including loading/ uploding etc. copmlete as required at site. |
| 49 | Supply and fabrication of pole protection system made up of 8 SWG steel wire mesh of size 75mm x25mm rectangular with 50mmx50mmx6mm MS angle iron for supporting the mesh i/c MV danger plat and grounding the protection system in suitable quality of CC etc as required. |
| 50 | SITC of 50mm x 50mm x 6mm angle iron mounting stand for ACP sign board and painting with with primer and finished paint as required. |
| 51 | Supply of C Channel 40x75x40 required for fixing of illuminated signage board etc. complete as reqd. |
| 52 | Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. |
| 53 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 54 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 55 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 56 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelCold twisted bars |
