|
| 1 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. and taking out/laying of pipe lines of hard/dense soil, complete all as specified and directed by Engr-in-Charge. |
| 2 | Returning, filling in, including spreading, leveling, watering and well ramming in layers, each layernot exceeding 25cm thick after pipes have beenlaid and tested complete, all as specified and directed by Engineer-in-Charge |
| 3 | Removing excavated material to a distance notexceeding50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point complete, all as specified and directed by Engineer-in-Charge |
| 4 | Taking up or down CI/DI/MS water mains pipe 300 mm bore (including all fittings), with flanged/welded butt joint/ spigot and socket ends and lead joints including burning out joints and recovering lead, complete all as specified and directed by Engr-in-Charge. |
| 5 | Refixing MS/DI/CI pipe obtained from item No. 5 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 300 mm bore complete inlcuding main / branch connections, complete all as specified and directed by Engr-in-Charge. |
| 6 | Supply, laying, jointing and testing MS ERW pipe class \"B\" of bore 300 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI markedalongwith circular welding joints laid in trenches/ along road/ on surface/ slopes/pillars/ culverts/ causeways etc, complete all as specifieddirected by Engr-in-Charge. |
| 7 | Taking up or down CI/DI/MS water mains pipe 250 mm bore (including all fittings), with flanged/welded butt joint/ spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.Taking up or down CI/DI/MS water mains pipe 300 mm bore (including all fittings), with flanged/welded butt joint/ spigot and socket ends and lead joints including burning out joints and recovering lead, complete all as specified and directed by Engr-in-Charge. |
| 8 | Refixing MS/DI/CI pipe obtained from item No. 7 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 250 mm bore complete inlcuding main / branch connections, complete all as specified and directed by Engr-in-Charge. |
| 9 | Supply, laying, jointing and testing MS ERW pipe class \"B\" of bore 250 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI markedalongwith circular welding joints laid in trenches/ along road/ on surface/ slopes/pillars/ culverts/ causeways etc, complete all as specifieddirected by Engr-in-Charge. |
| 10 | Taking up or down CI/DI/MS water mains pipe 150 mm bore (including all fittings), with flanged/welded butt joint/ spigot and socket ends and lead joints including burning out joints and recovering lead, complete all as specified and directed by Engr-in-Charge.Note : (i)Unserviceable items retrieved from site should be deposited in MES store by the contractor. |
| 11 | Refixing MS/DI/CI pipe obtained from item No. 11 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 150 mm bore complete inlcuding main / branch connections , complete all as specified and directed by Engr-in-Charge. |
| 12 | Supply, laying, jointing and testing MS ERW pipe class \"B\" of bore 150 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI markedalongwith circular welding joints laid in trenches/ along road/ on surface/ slopes/pillars/ culverts/ causeways etc, complete all as specifieddirected by Engr-in-Charge. |
| 13 | Decoupling, disconnecting sluice valve of size 300 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position complete allas specified and directed by Engineer-in-charge.Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates.(ii) S&F of spare parts shall be measured and paid separately under respective item |
| 14 | Stem bush bronze or as per existing |
| 15 | Gland flange cast iron |
| 16 | Stud/Bolt carbon steel |
| 17 | Stem nut/chaknut |
| 18 | Stem Stain less steel |
| 19 | Decoupling, disconnecting sluice valve of size 250 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete allas specified and directed by Engineer-in-charge.Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates.(ii) S&F ofspare parts shall be measured and paid separately under respective item |
| 20 | Stem bush bronze or as per existing |
| 21 | Gland flange cast iron |
| 22 | Stud/Bolt carbon steel |
| 23 | Stem nut/chaknut |
| 24 | Stem Stain less steel |
| 25 | Decoupling, disconnecting sluice valve of size 200 mmtaking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete allas specified and directed by Engineer-in-charge.Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates.(ii) S&F ofspare parts shall be measured and paid separately under respective item |
| 26 | Stem bush bronze or as per existing |
| 27 | Gland flange cast iron |
| 28 | Stud/Bolt carbon steel |
| 29 | Stem nut/chaknut |
| 30 | Stem Stain less steel |
| 31 | Decoupling, disconnecting sluice valve of size 150 mmtaking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete allas specified and directed by Engineer-in-charge.Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates.(ii) S&F ofspare parts shall be measured and paid separately under respective item |
| 32 | Stem bush bronze or as per existing |
| 33 | Gland flange cast iron |
| 34 | Stud/Bolt carbon steel |
| 35 | Stem nut/chaknut |
| 36 | Stem Stain less steel |
| 37 | S&F Cast Iron sluice valve of sizes 400mm dia (PN 1.6) ISI Marked with iron wheel headboth end flanged, CI /steel spindle, non rising typecomplete with Neoprene rubber gasket, nuts, bolts and washers etc, complete all as specified and directed by Engr-in-Charge. Note : (i)Unserviceable items retrieved from site should be deposited in MES store by the contractor.(ii) cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates. |
| 38 | All as per item No 17.00 here-in-before but of size 300mm dia, complete all as specified and directed by Engr-in-Charge. |
| 39 | All as per item No 17.00 here-in-before but of size 250mm dia, complete all as specified and directed by Engr-in-Charge. |
| 40 | All as per item No 17.00 here-in-before but of size 200mm dia, complete all as specified and directed by Engr-in-Charge. |
| 41 | All as per item No 17.00 here-in-before but of size 150mm dia, complete all as specified and directed by Engr-in-Charge. |
| 42 | All as per item No 17.00 here-in-before but of size 100mm dia, complete all as specified and directed by Engr-in-Charge. |
| 43 | All as per item No 17.00 here-in-before but of size 80 mm dia, complete all as specified and directed by Engr-in-Charge. |
| 44 | Supply and fixing in replacement of butterflyvalve of size 300 mm (PN 1.6) (ISI Marked) IS 13095 body cast iron typecomplete with neoprene rubber gasket, nuts, bolts and washers, necessary welding wk etc with hand lever operated and above with gear operated including taking down old unsv, complete all as specified and directed by Engr-in-Charge. |
| 45 | All as per item No 24.00 here-in-before but of size 250mm bore, complete all as specified and directed by Engr-in-Charge. |
| 46 | All as per item No 24.00 here-in-beforebut of size 200mm bore, complete all as specified and directed by Engr-in-Charge. |
| 47 | All as per item No 24.00 here-in-before but of size 150mm bore, complete all as specified and directed by Engr-in-Charge. |
| 48 | Supply fabrication and fixing MS joints like bends Tee, tapers, collars, elbow, tail piece (any type) caps, plugs up to 100 mm to 150 mm bore, complete all as specified and directed by Engr-in-Charge. |
| 49 | Supply and fix Nut bolt M-16 (50mm length) & M-20 (75mm length) with 02 (each 5mm thick) Nos washer at each set, complete all as specified and directed by Engr-in-Charge. |
| 50 | Supply and fixingleather gasket including replacement old UNSV gasket for 300/250 mmcomplete all as specified and directed by Engr-in-Charge. |
| 51 | Supply and fixing leather gasketincluding replacement old UNSV gasket for 200/150 mmcomplete all as specified and directed by Engr-in-Charge. |
| 52 | Supply and fix in replacement of cast iron air release valve with two air outlets of size 100 mm dia including all jointing materials like high pressure rubber gasket nuts, bolts, washerswith arrangement for fixing, including taking down complete.Item Code No/ Size CI 026/N Make: Leader or equivelant in Kirloskar/BVI/BIR.Complete all as specified and directed by Engr-in-Charge. |
| 53 | All as perser item No 32.00 here-in-before but of size 80 mm dia and Item code No/ Size CI 026/L, complete all as specified and directed by Engr-in-Charge. |
| 54 | Supply and fix in replacement of cast iron non return valve suitable for 300 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing withthe rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing. Item Art No : 1083C. Make: Zoloto or equivelant in Kirloskar/BVI/BIR/Leader.Complete all as specified and directed by Engr-in-Charge. |
| 55 | All as perser item 34.00 here-in-before but of size 250 mm dia and Item code No/ Size CI 026/L, complete all as specified and directed by Engr-in-Charge. |
| 56 | All as perser item 34.00 here-in-before but of size 200 mm dia and Item code No/ Size CI 026/L, complete all as specified and directed by Engr-in-Charge. |
| 57 | M&L for repair to leaking run lead joints in CI/DI spigot and socket end pipe line of 300 mm borepassing through NHAI, BRO , by providing new lead ,using good quality spun yarn, including necessary excavation, returning fillingin trenches in any type of soil,bailing out water, and at any depth complete all as specified and directed by Engr-in-Charge.Note:- (i) Contractor fully responsible for for jointing work required T&P equipment,and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate.(ii) Required extra fittings/pipe will be measured and paid separatel (iii) Necessary permission from civil authorities may be obtained where road cutting involves. |
| 58 | All as perser item 37.00 here-in-before but of dia 250 mm bore pipe, complete all as specified and directed by Engr-in-Charge. |
| 59 | All as perser item 37.00 here-in-before but of dia 200 mm bore pipe, complete all as specified and directed by Engr-in-Charge. |
| 60 | Material and labour for repair to leaking flanged/circular welding joints of 100 to 200 mm bore MS/GI pipe line passing through NHAI, BROby providing rubber or fiber board gasket, new flanges if required at site, nut bolts, washers and welding works where required etc, including necessary excavation, returning fillingin trenches in any type of soil, bailing out water, and any depth complete all as specified and directed by Engr-in-Charge. Note:- (i) Contractor fully responsible for jointing work required T&P equipment, and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate.(ii) Required extra pipe will be measured and paid separately..(iii) Necessary permission from civil authorities may be obtained where road cutting involves. |
| 61 | All as perser item No 40.00 here-in-before but of dia 250to 300 mm bore pipe, complete all as specified and directed by Engr-in-Charge. |
| 62 | Taking up or down old unseviceable GI pipe of size 80 mm dia including all fittings, complete all as specified and directed by Engr-in-Charge. |
| 63 | All as perser item No 42.00 here-in-before but of 50 mm dia and cradit is the property of the contractor, complete all as specified and directed by Engr-in-Charge. |
| 64 | All as perser item No 42.00 here-in-before but of 40 mm dia and cradit is the property of the contractor, complete all as specified and directed by Engr-in-Charge. |
| 65 | All as perser itemNo 42.00 here-in-before but of 25 mm dia and cradit is the property of the contractor, complete all as specified and directed by Engr-in-Charge. |
| 66 | Refixing GI/CI pipe obtained from Item No. 42 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 80 mm dia complete including main branch connections all as specified and directed by Engr-in-Charge |
| 67 | All as per ser item No 46.00 here-in-before but of 50 mm dia obtained from item No. 43.00, complete all as specified and directed by Engr-in-Charge. |
| 68 | All as per ser item No 46.00 here-in-before but of 40 mm dia obtained from item No. 44.00, complete all as specified and directed by Engr-in-Charge. |
| 69 | All as per ser item No 46.00 here-in-before but of 25 mm dia obtained from item No. 45.00, complete all as specified and directed by Engr-in-Charge. |
| 70 | Supply & fixingGI pipes of size 80 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge. |
| 71 | All as perser item No 50.00 here-in-before but of 50 mm dia, complete all as specified and directed by Engr-in-Charge. |
| 72 | All as perser item No 50.00 here-in-before but of 40 mm dia, complete all as specified and directed by Engr-in-Charge. |
| 73 | All as perser item No 50.00 here-in-before but of 25 mm dia, complete all as specified and directed by Engr-in-Charge. |
| 74 | S&F of Gun-metal, globeor gate valves, 50 mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked),complete all as specified & directed by Engr-in-Charge. |
| 75 | All as per ser item No 54.00 here-in-beforebut upto 40 mm bore, complete all as specified and directed by Engr-in-Charge. |
| 76 | All as per ser item No 54.00 here-in-before but upto 25 mm bore, complete all as specified and directed by Engr-in-Charge. |
| 77 | Supply only single core copper cable of size 1.5 sqmm,complete all as specified & directed by Engr-in-Charge. |
| 78 | Supply and fixing GI fittings medium grade ISI marked including complete all as required at site and as directed by Engr-in-Charge. |
| 79 | Elbow 20mm |
| 80 | Elbow 50mm |
| 81 | Socket 15mm |
| 82 | Socket 20mm |
| 83 | Socket 50mm |
| 84 | Socket 80mm |
| 85 | Union 15mm |
| 86 | Union 20mm |
| 87 | Union 50mm |
| 88 | Elbow reducer 25 x 20mm |
| 89 | Nipple 20 x100mm |
| 90 | Tee 20mm |
| 91 | Dead plug 20mm |
| 92 | Dead plug 50mm |
| 93 | Lead |
| 94 | Material and labour for shifting heavy items /usingexcavator / cleaning areas / cleaning site by providing crane/hydra/excavators/tractors/trolley ect as required at sitecomplete all as specified and directed by Engr-in-Charge. |
| 95 | Material and labour for taking down by scraping and preparation the surface of the header 300mm/400 mm dia approx 6 mtr long with sluice valve and NRVs at pump houses, OHTincluding repaintingone coat of super quality of black enamel paint with one under coat of primer etc complete all as specified and directed by Engr-in-Charge. |
| 96 | Material & labour for prepration of oldms pipe painted surface and aplying two coat of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed by Engr-in-Charge. |
| 97 | Material and labour for repair of valve pit chamber of any size not less than 1.2 mtr x1.2mtrx 900 mm necessary brick work, cement mortar / plastering in brick work,PCC ,welding work of hinges and MS sheet cover,painting on welding works ,MS sheets and plastered surface complete all as specified and as directed by Engr -in- charge. |
