|
| 1 | Dismantling and taking down squirrel cage induction motor assembly (10 HP), 3Ph, 415V for heating, varnishing of motor winding, remetaling of shaft and replacement of bearing etc. including disconnection of cable, earthing strip etc carrying of pumping set to Silchar work shop from Kumba Pump houseincluding loading/unloading and bringing back to same location after repair and testing at site with proper coupling and alignment, complete all as specified anddirected. |
| 2 | All as per item No. 1.00 here-in-before, but of capacity 40-50HP, the motor to be taken to Silchar workshop from Kumbha Pump House, complete all as specified and as directed. |
| 3 | All as per item No. 1.00 here-in-before, but of capacity 7.5 HP, the motor/submersible to be taken to Silchar workshop from Kumbha Pump House, complete all as specified and as directed. |
| 4 | Dismantling and taking down squirrel cage induction motor assembly 10-15 HP, 3HP, 415V for heating, varnishing of motor winding, remetaling of shaft and replacement of bearing etc. including disconnection of cable, earthing strip etc carrying of pumping set to Silchar work shop from Sonatola Pump House including loading/unloading and bringing back to same location after repair and testing at site with proper coupling and alignment, complete all as specified anddirected. |
| 5 | All as per item No. 4.00 here-in-before, but of capacity 30 HP, the motor to be taken to Silchar workshop from Sonatola Pump House, complete all as specified and as directed. |
| 6 | All as per item No. 4.00 here-in-before, but of capacity 0.5/1/2/3/5 the motor/submersible to be taken to Silchar workshop from Sonatola Pump House/Offr Mess/Stn HQ, complete all as specified and as directed. |
| 7 | Repair and maint squirrel cage induction motor assembly10 HP, 3 ph,415V alongwith wornout winding & rewinding the same with super enameled copper wire of existing gauge with all associated materials such as dry insulation varnish, cotton tape, soldering materials, glass tube, insulation paper, separator, film paper, removing of burn winding, cleaning of slot, removing of bearing, greasing, servicing, refixing of bearing etc including all dismantling work such as removal from foundation, coupling, disconnection of cable, earthing strip etc, carrying of motor to Silchar workshop from Sonatola/Kumbha pump house including loading/unloading and bringing back to Sonatola pump house and Kumba Pump house, reassembling and reinstallation of motorin foundation, proper coupling and alignment with pump set, including satisfactory testing, complete all as specified and as directed. |
| 8 | All as per item No 7here-in-before, butof capacity 12.5 HP |
| 9 | All as per item No 7here-in-before, butof capacity 15 HP |
| 10 | All as per item No 7here-in-before, butof capacity 30HP |
| 11 | All as per item No 7here-in-before, butof capacity 40 HP |
| 12 | All as per item No 7here-in-before, butof capacity 50HP |
| 13 | All as per item No 7here-in-before, butof capacity 3/5/7.5 HP |
| 14 | All as per item No 7above but submersible (fountain pump) / Monoblock boosting pump of capacity 0.5 HP/1 HP/ 2 HP including repairs to starters complete all as specified and as directed . |
| 15 | Dismantling, taking downand Repairing, servicing of pump set includingdismantling of existing centrifugal Pump set of capacity (10-15 HP), multi-stage including water connections of GI, Suction and delivery pipe, and transporting from Kumbha Pump House to Silchar work shop including loading/unloading for necessary repairs such as remetaling, turning of Pump shaft, bearing case of suction & delivery and repairing/replacement of impeller, stage bush, alongwith repair/replacement of unserviceable spare parts, withnew spare parts, cast iron welding of Pump casing and making alignment, connecting to motor, testing complete, carrying back from Silchar workshop, reinstallation of the Pump set complete with existing motor alongwith proper coupling and alignment, including satisfactory testing complete all as specified and directed. |
| 16 | All as per item No 15.00 here in before, but of pump set of capacity (40-50 HP).Note: Necessary spares required will be measured and paidseparately under respective items of this BOQ. |
| 17 | Dismantling, taking downand Repairing, servicing of pump set includingdismantling of existing centrifugal Pump set of capacity (10-15 HP), multi-stage including water connections of GI, Suction and delivery pipe, and transporting from Sonatola Pump House/AF Stnto Silchar work shop including loading/unloading for necessary repairs such as remetaling, turning of Pump shaft, bearing case of suction & delivery and repairing/replacement of, impeller, stage bush, alongwith repair/replacement of unserviceable spare parts, withnew spare parts, cast iron welding of Pump casing and making alignment, connecting to motor, testing complete, carrying back from Silchar workshop, reinstallation of the Pump set complete with existing motor alongwith proper coupling and alignment, including satisfactory testing complete all as specified and directed. |
| 18 | All as per item No 17.00 here in before, but of pump set of capacity (30 HP).Note : Necessary spares required will be measured and paidseparately under respective items of this BOQ. |
| 19 | Supply only bearing Size -6312ZZ suitable for 40-50 HP motor complete all as specified and as directed . Make - TATA/NBC/SKF or equivelent as approved |
| 20 | Supply only bearing Size -6308ZZ/6306ZZ/6404 suitable for 10-30 HP motor complete all as specified and as directed . Make - TATA/ NBC/ SKF or equivelent as approved. |
| 21 | Supply only Impeller cast iron suitable for 40/50 HP capacity multi-stage centrifugal pump, model RKB50/15E6ST, complete all as specified and directed. |
| 22 | Supply only stage casing cast iron suitable for 40/50 HP capacity multi-stage centrifugal pump, model RKB50/15E6ST, complete all as specified and directed. |
| 23 | Supply only Gasket set suitable for 50 HP capacity multi-stage centrifugal pump, model RKB50/15E6ST, complete all as specified and directed. |
| 24 | Supply only stuffing box gland set suitable for (10-15) HP capacity multi-stage centrifugal pump, model KDS/050, KDT/1050, KDT/1580, KDT1370/1372, complete all as specified and directed. |
| 25 | Supply only stuffing box gland set suitable for 40/50 HP capacity multi-stage centrifugal pump, model RKB50/15E6ST, complete all as specified and directed. |
| 26 | Supply only GM bush suitable for 10-15 HP capacity multi-stage centrifugal pump complete all as specified and directed. |
| 27 | Supply only GM bush suitable for 40-50 HP capacity multi-stage centrifugal pump complete all as specified and directed. |
| 28 | Supply and fixing shaft suitable for 30-50 HP complete all as specified and as directed. Make - TATA/NBC/SKF or equivelent as approved |
| 29 | Testing of treated/Raw water physical, chemical and bacteriological analysis from approved laboratory or institute, complete all as specified and directed. |
| 30 | Supply only gland packing 6mm complete all as specified and as directed. |
| 31 | Supply only servo MP 3 multipurpose grease suitable for pump set complete all specified and as directed. |
| 32 | Supply only Castrol Engine Oil suitable for pump set complete all specified and as directed. |
| 33 | Supply only orthotolidine solution (OT) on 100 ml bottle for chlorine test kit complete all as per specified and directed. |
| 34 | Supply and fixing PVC insulated single core stranded copper conductor conforming to IS 694 (1990),1100 volt grade 25 Sqmm complete all as specified and as directed . Make - FINOLEX /HAVELLS / KEI/ POLYCAB |
| 35 | Supply and fixing PVC insulated single core stranded copper conductor conforming to IS 694 (1990) ,1100 volt grade 35 Sqmm complete all as specified and as directed Make - FINOLEX/ HAVELLS /KEI /POLYCAB |
| 36 | Supply and fixing in repair MCCB 125-200 Amps 3 pole 415 volts 50 Hz 25 KA breaking capacity with adjustable thermal magnetic and spreader link on both sides, complete all as specified and as directed.Make - Havells /Legrand/L&T |
| 37 | Supply and fixing in repair contactor type ML - 4 complete all as specified and as directed. Make - L&T or equivalent approved |
| 38 | Supply and fixing in repair contactor type ML-3complete all as specified and as directed. Make - L&T or equivalent approved |
| 39 | Material and labour for preparation of old painted surfaces of motor and pump setcap 30 HP to 50 HP incl pipe of any size inside the roomby cleaning old rusted paint by scrapper andapplying two coats of synthetic enamel paint of existing colour with all necessery arrangement at Kumbha Pump House and Sonatola Pump House complete all as specified and as directed. |
| 40 | All as per item No 39 here in before but capacity 10 HP to 15 HP |
| 41 | All as per item No 39 here in before but capacity 02 HP to 7.5 HP |
| 42 | Material and labour earthing complete with copper earth plate electrode 600X600X3.15 mm thick buried directly in ground not less than 2.25 mtrs deep below ground level with top edge of the plate not less than 1.5 mtr below ground level connected to copper strip 20mm x 3mm as earthing lead by means of bolts, check nuts & washers of galvanised iron or steel all as shown in plate No. 3 including testingon completion, excavation of earth work, PCC pit, RCC cover with lifting hook, funnel with watering pipe of 20mm dia medium grade and earth lead protection pipe 40mm dia light grade, wire mesh, charcoal & salt and etc. including testing on completion, complete all as specified and directed. |
| 43 | Supply and fix 100 mm bore foot valve of gun metal sheet conforming to IS-4038, including fitting, flanges, nut bolts, packing rings etc complete in all respect specified and directed. |
| 44 | Supply and fix informatory / equipment history sign boards of size not less than900 x 600 mm rectangular type with polyester fabric / vinyl (PVC) type made out of square iron channels frame, back ground and equipment history as specified colours (blue and white) complete all as specified and directed.Location: Kumbha/Sonatola Pump House |
