|
| 1 | Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified. |
| 2 | Demolition of mud phuska on roof any thickness all as directed. |
| 3 | M & L wire brushing/Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified. |
| 4 | M&L PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregates as in padding over roof, minimum thickenss at khurra as 25 mm to maintain a slope of 1:40, complete all as specified and directed. |
| 5 | Supply only Water proofing compound complete. |
| 6 | M & L for Providing and laying3mm thick APP (Atactic Polyproplene Polymer) rienforced withpolyster non woven fabric laid on primed surfaces with bitumen primer @0.40kg/sqm by torch application complete all as specified. |
| 7 | M & L Precast PCC plain factory made tiles,ISI marked,22 mm thick of size 250 mm x 250 mm, fabricated using grey cement & no pigments. laid with 15 mm thick cement mortar (1:4) bedding and joints grouted flush in cement mortar (1:3) over roof surfaces complete all as specified and directed. |
| 8 | M&L Cement plastering 20 mm thickin cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer\"s instructions on surface of roof etc finished even and smooth without using extra cement including taking down the existing plaster complete all as specified and directed.Note : WPC shall be measured and paid separately. |
| 9 | Wire brushing and cleaning top surfaces of roofs by picking, sweeping clean and washing down with water to remove dust etc and rendering with 15 mm thick in cement mortor 1:4 using WPC including applying APP based polymeric membrane minimum weight 3 Kg/sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gram /sqm) laid on primed surfaces with bitumen primer @ 0.40 kg/sqm by forced / torch application complete all as directed and as specified. |
| 10 | Dismentling asbestos sheets of any description and in any position |
| 11 | Dismentling timber framed/unframed work in any description and in any position |
| 12 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mmthick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as sepcified and directed. |
| 13 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mmthick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete, all as sepcified and directed. |
| 14 | M&L for preparation of new surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete. |
| 15 | S&F MS work as in tubular/pipe/angle sections for vertical poles, rfaters and purlins includingwasher etc complete all as directed. |
| 16 | Demolition of cement concreteun -reinforced in ground floors and pavings n.exc 15cm thicknesscomplete all as specified. |
| 17 | Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed |
| 18 | M&L 18 to 20 mm thick machine cut kota stone slab as in flooring of size 580 x 580 mm each set and jointed in cement slurry laid over 15 mm thick screed bed in CM 1:4 complete all as specified.Note : 1. All the edges of slabs shall be grinded/cutted at the right angle before laying, so that paper thin, smooth jointing to be obtained.2. The colour of the slabs shall be uniform. |
| 19 | M&L for single charge, vitrified, stain & scratch resistant, joint free, premium quality coloured tilesarea of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc and 9-10 mm thick, in any pattern of light & dark shade tiles as approved, laid over 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 20 | All as per item No 19 but as in skirting over 10 mm thick rendering in CM 1:4 complete. |
| 21 | M&L for , vitrified tiles , joint free, premium quality coloured tiles 600 X 600 mm and 8-10 mm thick, as in floors / skirting etc. in any pattern of light & dark tiles as approved, laid over 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 22 | M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set andincluding 10 mm thick rendering in cement mortar (1:4) set jointed and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 23 | M&L for anti-skid ceramic joint free premium quality coloured tiles 400 X 400 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc.and pointed in white cement with pigment to match the colour of tiles laid over 15 mm thick screed bed in CM 1:4 complete all as specified. |
| 24 | M&L Granite16-18 mm thick work (of any type)(table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including nosing edges and chamfered laid over 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 25 | Providing and Laying Premium (1st) quality straight edge, ceramic tiles exterior gradescratch resistance of size 300x300x7 to 8 mm thick in floors etc. in any shade and design/pattern of light & dark tiles etc including 10 mm thick rendering in cement mortar (1:4) set jointed and pointed in white cement with pigment to match the colour of tiles laid over 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 26 | M&L 16 to 18 mm thickBaroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border etc only in flooring and the like works and flooring etc, 16-18 mm thick laid over 15 mm thick screed bed in CM 1:4 including bull-nose the front length, set and jointed in cement slurry and pointed in white cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs including rubbing, cutting and mirror type granite polishingand including dismantling/demolition complete all as specified.Note : Single piece should be used in steps/cills/jambs/shelves. |
| 27 | 25mm thick PCC 1:2:4 type BO using 12.5 mm graded stone aggregate as infloor complete as specified and directed. |
| 28 | M & L 75mm thick PCC 1: 4: 8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 29 | M & L 60 mmthick rubber moulded, coloured Machine pressed precast concrete interlocking M-30 paver block any shape and size confirming to IS 15658 - 2006 over sand cushioning 25mm thick and joint filled with dry sand complete all as specified and directed. |
| 30 | M & L coloured chequred cement concrete tiles 30 cm x 30 cm x 20 to 22 mm thick,made of grey cement set and jointed inneat cement slurry with grey cement and pigments as infloors to match the shade over screed bedor bedding layer or mortar 15 mm thick in cement mortar 1:4 for laying floor finished, complete all as spcified and directed. |
| 31 | Repair to RCC sunshades / Chajjas / Balconies / Columns / bands / beams / roof slab and similar RCC work at any position / height( single storey/ double storey/ tripple storey) by dismantling loose/disintegrated portionand filling crack with Cement Concrete 1:1½:3, (15mm to 50mmdepth) using 6 to 12mm graded stone aggregate to make up and finished to required shape and plastering the surfaces with 15 mm thick CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes, including scaffolding upto tripple storey, complete all as specified and directed by Engr-in-Charge. |
| 32 | Demolition of brick work built in cement mortar complete. |
| 33 | M&L Brick work with sub class \"B\" bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 all as specified. |
| 34 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. |
| 35 | Rendering 15 mm thick in cement mortar 1:4 , mixed with water proofing compound, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement with WPC paid and WPC to be measured separately complete all as specified. |
| 36 | Rendering 10 mm thick in cement mortar 1:6, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement complete all as specified. |
| 37 | Rendering 5 mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cementall as specified. |
| 38 | Preparation of new plastered external surfaces of walls /RCC surfaces/soffits of chajjas / roof projections / cantilevers / balcony etc and applying 02 coats of exterior emulsion paint (light shade) by using roller over & including a coat of wall primerand over a coat of acrylic wall care putty to make the surfaes smoothcomplete all as specified and directed. |
| 39 | Preparation of new plastered surfaces of walls /RCC surfaces / soffits of chajjas/roof projections / cantilevers / balcony etc and applying 02 coats of interior emulsion paint (light shade) by using roller over & including a coat of wall primerand over a coat of acrylic wall care putty to make the surfaes smoothcomplete all as specified and directed. |
| 40 | Preparation of new plastered surfaces of Ceiling/false ceiling etc and applying 02 coats of interior emulsion paint (light shade) by using roller over & including a coat ofwall primerand over a coat of acrylic wall care putty to make the surfaes smoothcomplete all as specified and directed. |
| 41 | Preprationof old plastered/unplastered surfaces of walls / RCC surfaces / soffits of chajjas / roof projections / cantilevers / balcony etcby complete removal of existing treatment by rubbing down / pealed treatment scrapping down loose and applying 02 coats of exterioremulsion paint (light shade)by using roller to external surfaces over & including a coat of acrylic wall care putty to make surfaces smooth, complete all as specified and directed. |
| 42 | Preprationof old plastered/unplastered surfaces of walls / RCC surfaces / soffits of chajjas / roof projections / cantilevers / balcony etcby complete removal of existing treatment by rubbing down/scrapping down loose/pealed treatment and applying 02 coats of interior emulsion paint (light shade)by using roller to intenalsurfaces over & including a coat of acrylic wall care putty to make surfaces smooth, complete all as specified and directed. |
| 43 | Preprationof old plastered/unplastered surfaces ofCeiling/false ceiling etc by complete removal of existing treatment by rubbing down/scrapping down loose/pealed treatment and applying 02 coats of interior emulsion paint (light shade)by using roller to ceilingsurfaces over & including a coat of acrylic wall care putty to make surfaces smooth, complete all as specified and directed. |
| 44 | M & L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed. |
| 45 | M & L for preparing old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 46 | M&L for preparation of old surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed. |
| 47 | M&L for preparation of old surfaces of wall and applying two coats of cement base paintcomplete all as specified and directed. |
| 48 | Complete removal of existing treatment including washing, rubbing down and removal of painted surfaces complete and applying metallic texture painting (Top quality) on walls in any colour/shade/pattern/design including preperatory work for base by applying primer/putty coat by any authorised applicator of manufacturers of paints complete all as specified and directed |
| 49 | Dismantling wall and ceiling boarding of any description, thickness including cover fillets complete al as specified and directed. |
| 50 | S&F PVC hollow Wall panelling of thickness 5 mmof any colour/pattern as directedcomplete fixed to wallsin position in all respect including supply and fixing of all accessories like fasteners/screws/solvent beadsetc complete all as directed by Engr-in-Charge. |
| 51 | S&F in repair false ceiling of 12.5mm thick gypsum board over and including concealed grid system complete fixed in all respect and all as per manufacturer\"s instructions in one/two/three levels and making recess for light fittings as incomplete description per pattern/design approved by Accepting Officer and including prepration of surfaces and appyling two coats of interior emulsion paint over a cot of primer complete all as directed by Engr-in-Charge. |
| 52 | S&F in repair Poly coated GI Frame work as in grid for False ceiling comprising of protected GI perimeter channel 0.55 mm thick with two uneual flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having to equal flanges of 15 mm each and web of 45 mm suspended from soffit and approx 900 mmcentre to centre with GI cleat and steel expansion fasteners with and incl ceiling section (not exc1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and hangers 6 mm dia GI (up to 1200 mm length adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x3 mm size 60 mm long complete with and incl 7 mm thick PVC laminated gypsum tiles of size 595x595 mm completeall as manufacturers instructions. |
| 53 | M & L in replacement as in repairs for 8 mm thick prelaminated wooden flooring laid over existing concrete surface by the manufacturer as approved bspecfied below:- (a) 125 micron polythene sheet (as vapour barrier) laid over existing concrete surface incldingtaking all necessary steps to make the levelness and smoothness of existing concrete surface and achieve moisture free conditions.(b) 5 mm thick themocole sheet over polythene sheet.(c) 8 mm thick prelaminated wooden flooring. |
| 54 | M & L prep of surfaces and applying two coat of silver paint complete all as specified and directed. |
| 55 | M&L for Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frames and shutters for doors, with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge.Each Door shutter to be provided with following fittingsa) Powder coated Al Tower bolt 150 mm - 02 Nos b) Powder coated American typeal handle 100 mm - 01 Nos on each leaf c) Powder coated Al Hinges 100 MM - 03 Nos on each leafd) Hydrulic door closer - 01 No e) Mortice lock 250 mm with two keys - 01 Nos |
| 56 | M&L for Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frames and shutters for windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge.Each window shutter to be provided with following fittingsa) Powder coated Al Tower bolt 150 mm - 02 Nos b) Powder coated D type al handle 100 mm - 01 Nos on each leaf c) Powder coated Al Hinges 100 MM - 02 Nos on each leafd) Powder coated aluminium hook and eye of suitabel length adjustable -01 Nos |
| 57 | Taking down Aluminium door / window shutters for repairing and re-fixing in same opening including tightening frame etc including repairs as under:- (i) Rectification of open joints by refixing of cleats, tightening of screws(ii) Replacement of unserviceable rubber beading of aluminium door / window shutter glass pannels etc all as directed.(iii) Replacement of unserviceable satinless steel butt hinges(iv) Replacement of unserviceable brass mortice lock of size 75mm with 4 lever complete all as specified and directed.(v) Replacement of unserviceable PVC panel inserts 5mm thick |
| 58 | S&F 12mm thick high density fibre board pre-laminated on both sides (water proof) as in partition / door panels fixed with and including EPDM gasket to render the glazing, air tight and water tight etc aluminium beading of size as required complete all as directed by Engr-In- Charge |
| 59 | S&F 5mm thick tinted glass for aluminium windows/Door including EPDM gasket to render the glazing, air and water tight etc and power coated aluminium beeds 20 mm size complete. |
| 60 | S&F 5mm thick frosted glass fixed to aluminium ventilator including necessary EPDm gasket to render the galzing, air and water tight etc and powder coated aluminium beeds 20mm size complete. |
| 61 | S&F stainless steel wire gauge 0.36 mm nominal dia of wire and average width of aperture 1.40mm to be fixed in Powder coated aluminium door/windows/ ventilators etc complete. |
| 62 | S&F in repairs Sheet glass ordinary quality 4 mm thick and glazing with oil puttly or wooden beadsin squareexceeding 0.5 sqm in each pane complete all as specified and directed. |
| 63 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holesand making good to reqd shape for hold fast block for new frame complete all as directed. |
| 64 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqmincl cutting holesand making good to reqd shape for hold fast block for new frame complete all as directed. |
| 65 | S&F factory Pressed steel frames made of MS sheet of 1.20mm thickness of size 105 x 60 mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts, PCC 1:3:6 type C-0 in fillinng inside frame & hold fasts etc complete all as specified. (Note :- Distrubed protion of existing floor/ wall/ tile/ plaster etc during fixing of chowkhats shall be repaired to match with exisitng finish.Cost of the same will be included in this items). |
| 66 | S&F factory Pressed steel frames made of MS sheet of 1.20mm thickness of size 125 x 60 mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts, PCC 1:3:6 type C-0 in fillinng inside frame & hold fasts etc complete all as specified. (Note :- Distrubed protion of existing floor/ wall/ tile/ plaster etc during fixing of chowkhats shall be repaired to match with exisitng finish.Cost of the same will be included in this items). |
| 67 | S&F factory made flush shutters 35mm thick, BWP conforming to IS: 2202 (Part-I) non-decorative type, core of block board construction with frame of Ist class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and incl supply and fixing of following items:-(a) Mild SteelButt Hinges 150mm -3 nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf(d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x3000mm- 1 nos per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper- 1 nos per leaf |
| 68 | S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-I section 8 clause 8.20 (a) kiln seasoned and chemically pressure treated all as specifeid including stainless steel 304 grade wire cloth ( 0.36mm nominal dia of wire and average width of aperture 1.40 mm ) and including two coats of Synthetic enemal paint over a coat of pink primer also incl supply and fixing of following items:-(a)Mild Steel Butt Hinges 150mm -3 nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf(d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x3000mm- 1 nos per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper- 1 nos per leaf |
| 69 | S&F Stainless steel tubing of 25mm bore as in curtain rod complete incl fixing fancy type brackets, stops etc all as specified & directed as in repair (For the purpose of measurement and payment running length of curtain rod only shall be considered). |
| 70 | Rotational moulded polythene water storage tank cylindrical vertical with closed top 500ltr capacity hoisted and fixed in position incl 20 mm ball cock, connecting to inlet or outlet and washout including disconnecting and demolition of existing tanks of any description. |
| 71 | S&F in repair Vitreous china squatting pan, \"Orissa\" pattern, size 580x440 mm white, with integral foot rests, CI \"P\" or \"S\" traps 100mm & PVC flush pipes 32mm diaincluding connecting to trap and to flushing pipe, anti-syphonage pipe etc including all joints and making good to floor all as specified |
| 72 | S&F in repairPVC 10 litre capacity valve less syphonic action type, flushing cistern, low level, white/coloured with inlet ball valve, float, pvc bend and handle including brackets, etc. complete all as specified by Engineer in Charge. |
| 73 | S&F Vitreous china urinal, stall type, of size 330x300x450mm incl providing and fixing plugs, embedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, waste coupling 32mm , bottle trap, pointing urinal back in cement; connection for discharge pipe incl necessary packing,union and 15mm CP urinal spreader and CP connection pipe complete all as specified and directed. |
| 74 | S&F 6mm thick looking mirror fixed to wall with stainless steel plugs / connector / spacers / screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered etched smooth finish etc.complete fixed in position all as specified and directed. |
| 75 | M&L for toilet paper holderstainless steel Coomplete all as specified and directed. |
| 76 | S&F vitreous china premium/1st quality wash basin (under counter), white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer incl. CP waste coupling , 32 mm dia flexible pipe complete fixed in position in all respect as per directions and taking down existing of any description/size all as specified. |
| 77 | S&F vitreous china premium/1st quality wash basin (counter top), white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union andincl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturer\"s instructions and taking down existing of any description/size all as specified. |
| 78 | S&F vitreous china premium/1st quality wash down water closet wall hung EWCwhite/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections—short connections pipe of length upto 600 mmand Cutting holes in or through walls, packing with PCC 1 : 2 :4 complete and taking down existing of any description/size complete in all respect all as specified. |
| 79 | S&F concealed flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, with inlet/outlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories etc as recommended by manufacturer for fixing, packing and including S&F of actuator knob/flush plates and making space/cavity in existing brick work wall for fixing and taking down existing of any description/size complete in all respect all as specifiedand as directed. |
| 80 | Repairing/rectifying complaits of alredy insallted concealed wall flusing cistren of any make / shape, including supply and fixinig of parts required to make the systemfunctional complete all as directed by Engr-in-Charge . |
| 81 | S&F vitreous china premium/1st quality wash down water closet single piece EWC S/P trap white/ivory/off white including connection to drain (or out going pipe), antisyphonagee pipe,etc.,and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections—short connections pipe of length upto 600 mmcomplete and taking down existing of any description/size complete in all respect all as specified. |
| 82 | S&F vitreous china premium/1st quality wash down water closet pan (pedestal pattern/EWC) S/P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete in all respect all as specified. |
| 83 | S&F health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 84 | S&F Angular Stop Cock with wall flange, fancy type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. |
| 85 | S&F fancy type, chromium plated long body bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete. |
| 86 | S&F stainless steel grating 150x150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified . |
| 87 | S&F Single liver 3-inlet divertor consisting of exposed parts kit with operating lever, wall flange and button and concealed body for 3-inlet single lever divertor with button assembly, cartidge sleeve and also including spout with wall flange chromium plated, screwed down high pressure complete all as specified and directed by Engineer in Charge. |
| 88 | Taking up or down existing steel tubing and connections, 15mm bore complete all as specified. |
| 89 | S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor ctc complete all as specified. |
| 90 | Taking up or down existing steel tubing and connections, 20mm bore complete all as specified. |
| 91 | S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified. |
| 92 | S&F Sensor urinal as in repairs (Enigma Mu Sense With Integrated Sensor of hindware make) cat -96004 or equivlent in Jaquar / Kholer complete all as directed by Engr-in-Charge. |
| 93 | Repairing/rectifying complaits of alredy insallted sensor urinals of any make /shape, including supply of parts required to make the urinals functional complete all as directed. |
| 94 | S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe 15 mm bore completeall as specified. |
| 95 | S & F in repair brass shower rose125 mm size (Chromium plated) with swivel joint complete, suitable for 15 mm bore iron pipe complete all as specified. |
| 96 | S&F 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required including all necessary fittings (patches, connectors, brackets etc) all as specified and directed |
| 97 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as directed. |
| 98 | S&F stainless steel of grade 304, chromium plated door lock complete all as specified and directed |
| 99 | S&F stainless steel of grade 304, chromium plated a pair of H type handle of 32 mm dia and length 300mm as specified and directed |
| 100 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab by complete all as specified and directed |
