|
| 1 | Item Sl.No. 1: - Clearing and Grubbing Road Land: Clearing and grubbine road Iand including uprooting wild vegetation, grass. bushes. shrubs. saplings and trees ofgirth upto 300 mn,removal of stumps ol sr:ch trees cut earlier and disposal ofunserviceable materials and stacking ofserviceable material to be used or auctioned. upto a lead of 1000 m including removal and disposal oftop organic soil not exceeding 150 mm in thickness as per MoRT&H Technrcal Specification clause 201.(ii) By - Mechanical (A) In area of non-thorny jungle |
| 2 | Item Sl.No. 2: - Bituminous Concrete: Providing and laying bituminous concrete with higher capacitybatch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.40 Percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respectsB. Grading II i. With Viscosity Graded Bitumen of VG-40 (layer thickness 30 mm) |
| 3 | Item Sl.No. 3: - Dense Graded Bituminous Macadam: Providing and laying Dense Graded bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 per cent by weight of total mix and filler, to 4.5 per cent by weight of total mix and filler,transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 505 complete in all respects. (50mm thickness)B. Grading II i. With Viscosoity Graded Bitumen of VG-40 |
| 4 | Item Sl.No. 4: - Tack coat: Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous / granular surface cleaned with Hydraulic broom as per MoRT&H Technical Specification Clause 503. |
| 5 | Item Sl.No. 5: - Prime Coat: Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.6 kg/sqm using mechanical means as per MoRT&H Technical Specification Clause 502. |
| 6 | Item Sl.No. 6: - Gunny Bag: Providing and placing gunny/ polythene (of minimum wall thickness of 500 micron) bags filled with sand (of minimum quantity of 0.034 cum) and properly manually stiched to avoid any leakage of sand as per specification. |
| 7 | Item Sl.No. 7: - Road marking: Road marking strips (retro-reflective) of specified shade/colour using Hot Applied Thermoplastic material with Reflectorising Glass Beads on Bituminous Surface.Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/colour usign hot thermoplastic material including reflectorising glass beads @ 250 gms per sqm RE by fully/semi automatic thermoplastic plaint applicator machine fitted with profile shoe heater including cost of cleaning the road surface of all dirt, seals, oil, grease and foreign material etc, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes as per MoRT&H Technical Specification Clause 803. |
| 8 | Item Sl.No. 8: - Retro- reflectorised Traffic signs: Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade shetting vide MoRT&H technical specification Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and MoRT&H Technical Specification Clause 801 and as per IRC 35 2015 & morth circular dated 20.07.2023a) 900 mm equilateral traingle |
| 9 | Item Sl.No. 8: - Retro- reflectorised Traffic signs: Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade shetting vide MoRT&H technical specification Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and MoRT&H Technical Specification Clause 801 and as per IRC 35 2015 & morth circular dated 20.07.2023b) 600 mm Circular |
| 10 | Item Sl.No. 8: - Retro- reflectorised Traffic signs: Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade shetting vide MoRT&H technical specification Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and MoRT&H Technical Specification Clause 801 and as per IRC 35 2015 & morth circular dated 20.07.2023c) 800 x 600 mm rectangular |
| 11 | Item Sl.No. 8: - Retro- reflectorised Traffic signs: Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade shetting vide MoRT&H technical specification Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and MoRT&H Technical Specification Clause 801 and as per IRC 35 2015 & morth circular dated 20.07.2023d) 600 x 450 mm rectangular |
| 12 | Item Sl.No. 9: - Thermoplastic transverse Bar marking: Providing and applying 2.5 mm thick thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material including reflectorising glass beads @ 250 gms per sqm area by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater including cost of cleaning the road surface of all dirt, seals, oil, grease and foreign material etc, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes as per MoRT&H Technical Specification Clause 803. (to be used as Rumble strips of Yellow Colour as per IRC 99-2018 Fig: 2.7) |
| 13 | Item Sl.No. 10: - Bamboo Palasiding: Single bamboo spur and palasiding of whole 2nd class bamboo (Jati or Bethua) 65 mm to 75 mm dia @ 150 mm c/c and closely packed & driven including fitting fixing with half bamboo kamis horizontally in three rows with cane or tying wire complete and struts 1500 mm apart longitudinally and providing brush wood as per drawing and technical specification Clause 1302.5. |
| 14 | Item Sl.No. 11: - Restoration of rain cuts: Restoration of raincuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300 mm width laying fresh material in layers not exeeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment, level and slopes as per drawings and MoRT&H technical specification Clause 3002. |
| 15 | Item Sl.No. 12: -Maintenance of Earthen shoulder (filling with fresh selected soil):Making up loss of material / irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000 m as per MoRT&H technical specification Clause 3003. |
| 16 | Item Sl.No. 13: - Drain clearance: Hill side drain clearance Removal of earth from the choked hill side drain and disposing it on the valley side manually as per MoRT&H techinical specification clause 3000. |
| 17 | Item Sl.No. 14: - Land Slide Clearance: Clearance of land slides in soil and ordinary rock by a bull-dozer D 80 A-12, 180 HP and disposal of the same on the valley side as per MoRT&H technical specification Clause 3000. |
| 18 | Item Sl.No. 15: - Road stud with lense reflector: providing and fixing road side stud 100 x 100mm, die-cast in aluminium, resisteant to corossive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30mm upto a depth of 60 mm and bedded in a suitable bituminous frout or epoxy mortar, all as per BS 873 part 4:1973 |
| 19 | Item Sl.No. 16: - Type - A, \"W\" : Metal Beam Crash Barrier: Providing and erecting a \"W\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high with 1.1 m below ground level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 mm, 330 mm long complete as per MoRT&H Technical Specification Clause 810. |
| 20 | Item Sl.No. 17: - Machine: Dozer D50/81for the removal of tree falling on the road and soil/mud coming from the hill during the rainy seasono on the National Highway. |
| 21 | Item Sl.No. 18: - Wet Mix Macadam: Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per MoRT&H Technical Specification Clause 406 |
| 22 | Item Sl. No. 19: - Retro Reflective Tapes: Providing and fixing retro-relectorised warning signs of red, white, yellow high quality retro-reflecting water proof sheeting tapes (45mx72mm) in width of standard specification and direction of the Engineer-in-charge. |
| 23 | Item Sl.No. 20: - Object Hazard Marking Traffic Sign: Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade shetting vide MoRT&H technical specification Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per IRC guideline/ MoRT&H Technical Specification Clause 801.a) 900 x 300 mm Rectangular |
| 24 | Item Sl.No. 21: - Road Delineators: Providing and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings and as per MoRT&H |
| 25 | Item Sl.No. 22: - Ordinary Kilometer Stone (Precast): Reinforced cement concrete M 15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing, etc. as per drawing and MoRT&H Technical Specification Clause 805.a) Ordinary Kilometer Stone (Precast) |
| 26 | Item Sl.No. 22: - Ordinary Kilometer Stone (Precast): Reinforced cement concrete M 15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing, etc. as per drawing and MoRT&H Technical Specification Clause 805.b) 5th kilometre stone (precast) |
