|
| 1 | Supply & Fixing of of 4 Mtr Long Decorative pole made out of mild steel Galvanized Tubular pole with cast aluminium embellishment and pole has a window. The pole is primer coated and PU painted.Proper Completion of work as per direction of E/Ic.(As per Market Rate) |
| 2 | Supply & Fixing of 40 W Post top Lalturn Proper Completion of work as per direction of E/Ic. (PSR Bagum Hazrat Mahal Park) |
| 3 | Supply and fixing 40 A TPN capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. (SI No 807) |
| 4 | Supply and fixing offactory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 100 to 120 Watt. Confirming to IP 65 protection complete in all respect. SI.No. 1453/2018CAT-AAA(55 +100= 155) |
| 5 | Supply and fixing ofLED Street light Fittinghaving die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect. CAT- AAA SI No. 1424 /2018 |
| 6 | S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve CAT-A SI No. 1002/2018 |
| 7 | S/W of submain with two Nos. of 2.5 Sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material Labour and T&P required for proper completion of the work as directed at site by E/I. SI. No. 289/18. |
| 8 | Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. SIN. 501 |
| 9 | 10 sq. mm 4 core |
| 10 | Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB\"s (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mountedon non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB\"s shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc.The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. |
| 11 | Incoming 400 Amp. MCCB-1 Nos.Outgoing 200 Amp. MCCB-2 Nos,100 Amp MCCB- 1 No, & 63 Amp MCCB-1 No SI No. 813 (a)/2018 |
| 12 | Supply and Fixing of GI/MS Junction Box Coverfor Oxtagonal/tubuler Pole for Suitable size proper completion of work as per direction of E.Ic. (PSR) |
| 13 | SITC of 36-45 Watt LED decorative column. The decorative column made out of mild steel. The hight of the decorative column shall be 900-1000 mm LED shall mounted on the PCB and fitted in the luminaries.PCB shall be fitted on the suitable heat sink for proper heat dissipation, suitable constent current LED driver with power factor 0.9 or more and efficiency 85% or more shall also fitted in side the luminair. The sarface of the luminaire shall be machined and polished properly to give it a smooth sarface. LED Lummen < 120 lm/watt, surge protection > 2.5 KV, Junction Temp 80 degree and LED macadam step should be < 4. The decorative column shall be duly pretreated by shot blasting process and coated in U.V. ray resistant polyurethane polyester in approved color shade. The thickness of polyurethane / polyester along with the Primer should be <90 Microns. IP68 connector shall be provided in the luminaire for the mains connections all complite.Make GOLDWYN/Crompton/K-LITE/ Philips or as per approval of engineering in charge. (Size of collumn light 300mm X 300mmX 1000 mm or as per side requirement) |
