|
| 1 | Supply of materials |
| 2 | Stone Aggregate(single size): 40 mm nominal size |
| 3 | Stone Aggregate(single size):20 mm nominal size |
| 4 | Coarse sand (zone III) |
| 5 | Portland Cement |
| 6 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 7 | Vibrator (Needle type 40 mm) |
| 8 | Stone for masonry work |
| 9 | Through and bond stone size 24 x 24 x 39cm |
| 10 | Stone Aggregate(single size): 10 mm nominal size |
| 11 | Solid blocks of size 40x20x20cm |
| 12 | Twisted steel/deformed bars |
| 13 | Structural steel such as tees, angles, channels and R.S. joists |
| 14 | Red oxide Zinc chromate primer |
| 15 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 16 | Beam clamp 300-380 mm (450-1070 mm) |
| 17 | Anjili wood scantls |
| 18 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
| 19 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
| 20 | Bright finished or black enameled mild steel screws 40 mm |
| 21 | Bright finished or black enameled mild steel screws 20 mm |
| 22 | Anjili wood planks |
| 23 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 24 | Mild steel tubes hot finished welded type |
| 25 | Welding by electric plant |
| 26 | Mild Steel round bar above 12 mm dia |
| 27 | Flats up to 10 mm in thickness |
| 28 | Bright finished or black enameled mild steel butt hinges 125x65x2.12 mm |
| 29 | Bright finished or black enameled mild steel screws 50 mm |
| 30 | Oxidised mild steel tower bolt (barrel type) 200x10 mm |
| 31 | Oxidised mild steel screws 30 mm |
| 32 | Iron hooks & eyes 100 mm |
| 33 | Oxidised mild steel handles 125 mm |
| 34 | Oxidised mild steel screws 25 mm |
| 35 | Brass 100 mm mortice latch and lock with 6 levers without pair of handles |
| 36 | Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock |
| 37 | 50 mmx42 mmx2 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish |
| 38 | 24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish |
| 39 | Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers |
| 40 | Vitreous china pedestal type wate closet |
| 41 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
| 42 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 43 | Vitreous China flat back wash basin 630x450 mm |
| 44 | 15 mm C.P.brass tap |
| 45 | C.P. brass waste 32 mm |
| 46 | C.I. bracket for wash basin and sinks |
| 47 | PVC pipe 63 mm outer dia. 4 kgf/cm2 |
| 48 | Acrylic exterior paint |
| 49 | Exterior primer |
| 50 | Vitrified floor tile 60x60 cm |
| 51 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
| 52 | GI trafford profile sheet 0.35mm thick |
| 53 | Bitumen washer |
| 54 | G.I Limpet washer |
| 55 | Galvanised steel J or L hooks 8 mm dia |
| 56 | Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots |
| 57 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades designs except White, Ivory, Fume Red Brown etc. |
| 58 | Rolling shutter made of 80x1.25 mm machine rolled laths |
| 59 | Top cover for rolling shutters 1.25 mm thick |
| 60 | 27.5 cm long wire spring grade no 2 for rolling shutters |
| 61 | Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm |
| 62 | Wire nails |
