Tender For Periodical Services And Misc Works In Otm Accn At Bakloh Cantt
Tender Value
25 Lakhs
Estimated cost
Bid Submission
20 May 2025
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bakloh → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Periodical Services And Misc Works In Otm Accn At Bakloh Cantt
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-May-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-May-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed. |
| 2 | 0.63 mm thick, galvanised, plain mild steel sheetingas in ridges, hipe, valley gutters, drip and straight flashing (length and girth as fixed)with grade of zinc coating 275 gms per sqm including dismantling oldsteel sheetsany gaugethickness complete all as specified and directed. |
| 3 | Rolled mild steel work in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)conforming toFe-410- W(Gde- E-250) quality- B, complete all as specified and as directed. |
| 4 | Mat finish, premium quality, joint free (edge cut), coloured/ printed ceramic Non skid tiles 7-8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match including dismantling old tilescomplete all as specified and directed.Note : Size/Shade/Colour of tile shall be approved by the AGE(I). |
| 5 | Glazed ceramic colouredtilesof size450 mm x 350 mm x7 mm/350 mm x 250 mm x7 mm thick as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:3 including dismantling old tiles complete all as specified and directed. Note : Size/Shade/Colour of tile shall be approved by the AGE(I). |
| 6 | Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement :4 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement,including taking down cement plaster, complete all as specified. |
| 7 | Rendering cement plaster 15mm thick in cement mortar 1:6(1 cement :6 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on stone masonry surfaces or surface otherthan fair face of brickwork or on one side of lathing, surface finished even and smooth without using extra cement,including taking down cement plaster, complete all as specified. |
| 8 | Supply only intergal water proofing compound, complete all as specified. |
| 9 | Preperation of old plastered/painted surface of wall and applying wall care cement based putty 2mm thick , as per manufacturer\"s instructions, complete all as specified.Note : Where thickness of putty required is more than 2mm , the same shall be made good using POP and than putty shall be applied to obtain even and smooth surface and nothing extra shall be admisible on this account. |
| 10 | Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high, complete all as specified.Note : Letters etc., shall be painted with thick paint, so that they stand out boldly and solidly without showing signs of brush marks, if necessary, they shall be repainted until the desired result is obtained. |
| 11 | Exterior Painting work including complete removal of existing treatment till top surface of existing plaster and crack filling with crack seal upto 3mm where required and making good/smooth the surface with wall putty with silicon additives and sanding these surface for removal of loose particles and applying one coat of water proof primer on walls and chajjas with 10% dilution of water and applying two coats of 100% acrylic smooth emulsion exterior grade with silicon additives and anti-algal properties, complete all as specified. |
| 12 | Preparation of old decorated plastered or unplastered surfaces including cleaning by brooming downor with steel wire brushing scraping down smoke soot, moulded moss and efflorescent salts and treating oil and greasy spotsand applying one coat of cement base paint on walls as specified. |
| 13 | Preparation of old decorated plastered or unplastered surfaces including cleaning by brooming downor with steel wire brushing scraping down smoke soot, moulded moss and efflorescent salts and treating oil and greasy spotsand applying one coat of distemper oil emulsion on walls as specified. |
| 14 | Preparation of old decorated plastered or unplastered surfaces including cleaning by brooming downor with steel wire brushing scraping down smoke soot, moulded moss and efflorescent salts and treating oil and greasy spotsand applying two coatsof distemper oil emulsion over 3mm thick wall care putty on walls, complete all as specified. |
| 15 | Preparation of old decorated plastered or unplastered surfaces including cleaning by brooming downor with steel wire brushing scraping down smoke soot, moulded moss and efflorescent salts and treating oil and greasy spotsand applying two coats of white wash on walls after filling holes with putty, complete all as specified. |
| 16 | Preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise describedand applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed. |
| 17 | Preparation of oldwooden surfaces of any description, not otherwise described, over 10cm in width or girthand applying onecoat of synthetic enamel paintcomplete all as specified and directed. |
| 18 | Preparation of oldsteel surfaces of any description, not otherwise described, over 10cm in width or girthand applying onecoat of synthetic enamel paintcomplete all as specified and directed. |
| 19 | Preparation ofnewplastered surfaces or un plastered, previously undecorated wall surfaces and applyingtwo coats of white wash, complete all as specified and directed. |
| 20 | Preparation ofnewplastered surfaces or un plastered, previously undecorated wall surfaces and applyingtwo coats of cement base paint over a coat of chalk whiting as priming coat , complete all as specified and directed. |
| 21 | Preparation ofnewplastered surfaces or un plastered, previously undecorated wall surfaces and applyingtwo coats of oil bound distemper , complete all as specified and directed. |
| 22 | Preparation ofnewplastered surfaces or un plastered, previously undecorated wall surfaces and applyingapplying Twocoats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over and including 2mm thick wall care putty, complete all as specified and directed. |
| 23 | G I tubingmedium gradeof 20 mm borewith all fittings and fixtures fixed to wall and ceiling or laid infloor /trenches including taking down old tubingcomplete all as specified and directed. |
| 24 | Disconnecting existing tanks of capacity exceeding 250 Lires but but not exceeding 500 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc, complete all as specified. |
| 25 | 20mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 g m s .), fixed in repair, complete all as specified. |
| 26 | Rotational moulded polyethylene water storage tank 500 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position with ball brass valve, high pressure with PVC float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line, including dismantling old tank any type,complete all as specified. |
| 27 | Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 21 of tender doucments. |
AI Tender Summary
Tender Timeline
May 13, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
May 20, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 20, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 27, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender