Annual Maintenance, Repairs and other emergent works of various water supply schemes falling in the area of Block Kupwara,Halmatpora Partly, Partly Hirri Qadirabad excl, Karihama, Gushi, Pazipora & Dedikote of Sub-Division Kupwarafor the year 2025-26--1 Earth work in excavation by manual means in trenches for foundations, drains,pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspitsand the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge 2 In all kinds of soils 3 Ordinary rock 4 Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) includingdisposal of excavated earth lead upto 50meters and lift upto 1.5 m,as directed by Engineer-in-Charge. 5 In all kinds of soils 6 Ordinary rock 7 Hard Rock (Requiring Blasting ) 8 Hard Rock (Blasting Prohibited) 9 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 10 In all kinds of soils 11 Ordinary rock 12 Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. 13 In all kinds of soils 14 Ordinary rock 15 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. 16 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. 17 Beyond 30 cm girth upto and including 60 cm girth. 18 Beyond 60 cm girth upto and including 120 cm girth. 19 Beyond 120 cm girth upto and including 240 cm girth. 20 Above 240 cm girth 21 Providing & fixing upto floor five level precast cement concrete hollow blocks, including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete. 22 1:1½:3(1 cement :1½ coarse sand :3 graded stone aggregate 20 mmnominal size) 23 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size) 24 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size) 25 Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement) 26 Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 fine sand) including curing. 27 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : 28 Cement mortar 1:6 ( 1 cement : 6 coarse sand) 29 Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: 30 Cement mortar 1:6 (1 Cement : 6 coarse sand) nallah 31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 32 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): 33 Second class kail 34 Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete 35 First class Budloo/Fir wood 36 Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. 37 With 2nd class teak wood beading 62x19 mm 38 Providing and fixing specified board medium density exterior grade (Grade I) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 39 Flat pressed 3 layer particle board or graded wood particle board IS:3087 18 mm 40 Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : 41 Second class Kail wood 42 Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 43 100 mmand 150 mm dia GI pipes 44 65 mm and 80 mm dia GI pipes 45 40 mm and 50 mmdia GI pipes 46 25 mm and 32 mm dia GI pipes 47 15 mm and 20 mm dia GI pipes 48 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating eachdeposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. 49 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : 50 Above 40 mm nominal bore 51 15 - 40 mm nominal bore 52 Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe) 53 Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. 54 100 mm dia pipes 55 125 mm dia pipes 56 150 mm dia pipes 57 200 mm dia pipes 58 250 mm dia pipes 59 300 mm dia pipes 60 Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new spindle / rod made out of mild steel & new check nut made out of gun metal material. The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactures and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job) from 100 mm dia sluice valve upto 300 mm dia sluice valve including cost of salvaged material. 61 Decamping of main cable at Filtration Plants from LT poles, cutting of main cable by Hexa blades, providing / fixing of bone china insulators, thimbles, cost of PVC tape rolls, fuse wire, engagement of skilled/ non skilled labours, cost of rope, hire charges of long stair etc.complete job 62 Providing / fixing of M.S double collers/ arresting of leakagesby way of weldingincluding all sorts of carriages 63 80 mm dia 64 100 mm dia 65 150 mm dia 66 200 mm dia 67 Providing / fixing of double collers, G.I./ M.S. for arresting of leakages by using led & spun yarn incld. earthwork excavation, refilling etc. including all sorts of carriages (length verying from 0.60 to 1 Mtr.) 68 40 mm dia 69 50 mm dia 70 65 mm dia 71 80 mm dia 72 100 mm dia 73 150 mm dia 74 200 mm dia 75 Providing and fixing including testing, commissioning & fabricating at site M.S pipe Specials Etc. & all sorts of carriages upto site of work, as per requirement at site complete job. 76 Providing and fixing of Electrical points (heating and lighting) incld. cost of wire switches, necessary MCB’s switch boards, ceiling roses reputed make ISI mark screws, casing / conduit materials of allsorts of carriage and labour charges required for the job. 77 Lighting points 78 Heating points 79 Supply/ fixing of pipe specials from open market, if not available in the Divisional stores of ISI marked standard make. 80 100 mm dia G.IUnion 81 80 mm dia G.IUnion 82 65 mm dia G.I. Union 83 50 mm dia G.I. Union 84 40 mm dia G.I. Union 85 25 mm dia G.I. Union 86 20 mm dia G.I. Union 87 80 mm dia G.I. Elbow 88 65 mm dia G.I. Elbow 89 50 mm dia G.I. Elbow 90 40 mm dia G.I. Elbow 91 25 mm dia G.I. Elbow 92 20 mm dia G.I. Elbow 93 80 mm dia G.I. Socket 94 65 mm dia G.I. Socket 95 50 mm dia G.I. Socket
