|
| 1 | H.S.S. TOOL BIT HAVING 10% COBELT L&T/ADDISON/MIRANDA/ROHIT MAKE ALL SIZE |
| 2 | HIGH SPEED TOOL STEEL HAVING 10% COBELT ALL SIZE GERMAN MAKE |
| 3 | CARBIDE TIP TOOL LEFT / RIGHT HAND (MIRANDA/WIDIA/SANDVIK MAKE)Size 1/2\" |
| 4 | 3/4\" |
| 5 | 1\" |
| 6 | \"V\"/\"U\" SHAPE CARBIDE TIPS MIRANDA/ WIDIA/SANDVIK 1/2\" |
| 7 | 3/4\" |
| 8 | 1\" |
| 9 | H.S.S. DRILL TAPPER SHANK TWIST AND STRAIGHT SHANKIT/ADDISON MAKE ALL SIZE |
| 10 | FOUR JAW CHUCK/DOCK CHUCK, DOUBLE SLOTE BEST QUALITY SIZE 12\" |
| 11 | STEEL MEASURING TAPE 3 MTR |
| 12 | 15 MTR |
| 13 | COTTON MEASURING TAPE 30 MTR. |
| 14 | HIGH SPEED STEEL TAP SET TOTEM MAKE ALL SIZE |
| 15 | BASTERED FILE, PIPE WRINCH, SPANNER ALLENKEY SET ALL OTHER SUCH TOOLS OF J.K./JHALANI/EVEREST MAKE (ALL TYPE/ALL SIZE) |
| 16 | SPRING TYPE CALIPER OUT SIDE/INSIDE(i) 6\" |
| 17 | (ii) 8\" |
| 18 | (iii) 12\" |
| 19 | DRILL SOCKET SET |
| 20 | REVOLVING CENTER MT-4 |
| 21 | CHAIN PULLY BLOCK COMPLETE WITH TEST CERTIFICATE (INDEF MAKE)1 TON |
| 22 | 2 TON |
| 23 | 3 TON |
| 24 | 5 TON |
| 25 | DEAD CENTRE MT-4 |
| 26 | TOOL HOLDER 1\" |
| 27 | HEXA FRAME 1/2\" X 12\" |
| 28 | D. SHACKLESSize 1/2\" |
| 29 | 3/4\" |
| 30 | 1\" |
| 31 | COMBINATION SET 6\" BASE (AEROSPACE MADE IN GERMENY) |
| 32 | LOAD CHAIN FOR CHAIN PULLY BLOCK WITH T.C.01 TON CAPACITY |
| 33 | 02 TON CAPACITY |
| 34 | 03 TON CAPACITY |
| 35 | 05 TON CAPACITY |
| 36 | TUBE EXPENDER (POWER MASTER)39 TO 42 MM |
| 37 | 42 TO 45 MM |
| 38 | 57 TO 65 MM |
| 39 | 74.6 TO 84.2 MM |
| 40 | 76.2 TO 85.5 MM |
| 41 | 96 TO 100 MM |
| 42 | RATCHAT FOR TUBE EXPENDER, Size 3/4\" |
| 43 | Size 1\" |
| 44 | FILLER GAUGE 0.01 TO 1 MM (THYOTO JAPAN)Size 4\" LONG |
| 45 | 6\" LONG |
| 46 | 12\" LONG |
| 47 | DEPTH GAUGE SIZE 6\" |
| 48 | 12\" |
| 49 | TRY SQUARE(GUNIA) 6\" |
| 50 | POWER HEXA BLADE(MIRANDA) 18\"X1.5\"X10 TPI |
| 51 | GRINDING DRESSURE/ DIAMOND DRESSURE 6\"X12\" |
| 52 | ADJUSTABLE REAMER FOR 2.5\" TUBE |
| 53 | ANGLE GRINDER (WOLF/BOSCH/MAKEETA MAKE)Size 4\" |
| 54 | 5\" |
| 55 | RUBBER PAD FOR ANGLE GRINDER BOSCH/WOLF MAKE) 4\" |
| 56 | 5\" |
| 57 | S.S. WIRE ROPE SEALING WITH EYE LOOP BOTH SIDE (i) 1/2\" X 1 MTR |
| 58 | (ii) 1/2\" X 1.5 MTR |
| 59 | (iii) 1/2\" X 3 MTR |
| 60 | (iv) 1/2\" X 10 MTR |
| 61 | (v)3/4\" X 3 MTR. |
| 62 | (vi)3/4\" X 10 MTR. |
| 63 | (vii)1\"X5.35 MTR.X 400 MM |
| 64 | (viii) 1\" X 5.25 MTR.X400 MM |
| 65 | (ix) 1\"X 2.5 MTR. X 300 MM |
| 66 | EN-8 Shaft. (with test certificate) (i) up toOD 4\" |
| 67 | (ii) up toOD 5\" & above |
| 68 | EN-9 Shaft. (with test certificate) (i) up toOD 4\" |
| 69 | (ii) up toOD 5\" & above |
| 70 | Steel Wire Rope Sling Steel Core 6/36 Construction With Double Ferrule Machenically Sliced Having 2ft. (600mm) Eye Both Sides Recommeded Safe Working Load 10.5 Ton With Test Certificate Size - 28mm x 12.20 Mtr |
| 71 | Champion (Hammer) Make High Pressure Steam Jointing Sheet, Style-54 Metallic Size-3mm |
| 72 | Champion (Hammer) Make High Pressure Packing S.S Wire, Style-1916 in standard Coil of 6 MTR, Size 6mm |
| 73 | Carbide tip, Grade TS-20, size 1\"(V shape) Sandvik/widia make |
| 74 | Taflon round bar, Size 4\" × 1̍ |
| 75 | Size 5\" × 1̍ |
| 76 | Goti 1\" with ratchet handle 14\" (havy duty) |
| 77 | High Carbon Steel Hexa Blade 1/2\"×12\" (Miranda Make Only) |
| 78 | Teflon rod size1\"×12\" |
| 79 | CHIEF ENGINEER CHIEF CHEMIST |
