|
| 1 | M&L for PCC 1:5:10 type E-2, using 40 mm graded stone agg as in foundation, filling, mass concrete and sub base of floor complete all as specified and directed. |
| 2 | M&L for cement concrete type B-1 (1:2:4) 20 mm graded aggregate in foundation/filling &PCC padding in sunken floors/ roofs (for slope correction)and mass concretecomplete all as specified and directed. |
| 3 | M&L for cutting down removing vegitation plant digging out penetrated roots withtronices looping branches not exc. 10cm girth PROTRUDING over wall roofs by necessary cutting hole in brick / concrete wall/ surfaces and injecting chemical GLYPHOSPHATW 41% SL 20 ml or till refusal by makimg cut/ injection in the stem of plant 30mm C/C spraying with solution (25ml Glyphospoto 41% diluted with one litre water) and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 and to match the existing work and finishes and removing of debris out side premises/ defence land including necessary scaffolding etc wk will be carried out upto 6 th storey height bldgs complete all as specified & directed. |
| 4 | M&L for PCC 1:2:4 Type B-1 {using 20mm graded crushed stone aggregate} as in coping/benching bed plates roof kerbs mud stops, including weathering, slightly rounded or chamfered angles and throating etc including necessary form work complete all as specified and directed. |
| 5 | M&L for Cutting chases, pinningin making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills sunshades, shelves lintels etc and cutting chases for concealed water pipe etc and making good cutting not exc 10cm. complete all as specified and directed. |
| 6 | Taking down shutters of any description and make n. exc. 1 sqm each including removing from site complete all as specified and directed. |
| 7 | Taking down shutters of any descriptionexc 1 sqm & n. exc 2 sqmeach including removing from site complete all as specified and directed. |
| 8 | Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each including removing from site complete all as specified and directed. |
| 9 | Taking down chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each including removing from site complete all as specified and directed. |
| 10 | S& F Factory Made Solid PVC coulour Moulded Door Shutter with wood free EPS, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawingNote: Colour approved by GE / Engr-in-Charge |
| 11 | S&F aluminium anodised barrel tower bolt of extruded section 150 mm long and fixed complete all as specified and directed. |
| 12 | S&F 100 mm sizemild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed. |
| 13 | S&Faluminiumhandles, cast type, anodised 150 mm size completeall as specified and directed. |
| 14 | S&F floor door stopper double leg of aluminium alloy bodyof 140 mm length with aluminium base plate of size 50 mm x 40 mm complete all as specified & directed. |
| 15 | S&F in repair floor door stopper double leg of aluminium alloy bodyof 140 mm length with aluminium base plate of size 50 mm x 40 mm complete all as specified & directed. |
| 16 | S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified & directed. |
| 17 | S&F 125 mm long hasp & staple safty type cold rolled heavy weight cold rolled mild steel with mild steel hinge pinincluding bolt to hinge plate and fixed with screws complete all as specified & directed. |
| 18 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 19 | M&L for Taking down existing double action floor spring hydraulically regulatedand Refixingonly after necessary repairs, oiling & greasing etc in proper position with and includingproper screw complete all as specified and directed. |
| 20 | S&F in repair aluminium (die cast) bodydoor closer hydraulically regulated, designation No.3 universal type, suitable for doors shutters up to 1000 mm in width and of weightbetween 61 to 80 Kg and fixed complete all as specified and directed. |
| 21 | M&L for taking down existing door closer hydraulicially regulated andrefixing after necessary repairs,oiling & greasingetc in proper positionwith and including proper screw complete all as specified & directed. |
| 22 | S&F in repairs mortice lock, vertical type of size 100 mmwith brass body 2 lever complete all as specified. |
| 23 | S&F25 mm dia, brass, knobs for cupboard fixed with nut, screw and washer of mild steel, bright finised completeall as specified and directed. |
| 24 | S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including lettingfor cabinets fixed with screws complete all as specified and directed. |
| 25 | S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30 mm completeall as specified and directed. |
| 26 | S&F in repair venetian blind coloured powder coated 35mm wide and 1 mm thick Aluminium alloy blades with opening and closing arrangment including aluminium hanging channel at top with sliding wheel/ring including pulling rope in both side and necessary accessories complete all as specified and directed. |
| 27 | S & F in repair 1.25mm thickness of laths steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, haps and staple and one shop coat of primer erected in position as indicated push pull or manual type complete all as specified and directed |
| 28 | S&F powder coated aluminium frame for doors, windows or partition including aluminium beading, hinges of required size,jointing cleats, screws, dash,fastners,plug for fixing with wall, columns etc complete all as specified & directed. |
| 29 | Fixing only powder coated aluminium frame for doors, windows or partition including aluminium beading, hinges of required size,jointing cleats, screws, dash,fastners,plug for fixing with wall, columns etc complete all as specified & directed. |
| 30 | S&F Powder Coated aluminiumwindow and ventilator shutters side hung type without sash bars, , aluminiumsectionweighing not less then 0.55kg/m includingnecessary jointing cleats/ glazing clips,rubber neoprene packing, anodised aluminium snap beading , screws, anodised aluminium fittings such as peg stay 150mm long (1 No) hinges typeB-21 100mm long ((2 Nos) suitable handle (1 No) complete all as specified and directed. |
| 31 | S&F powder coated of any colour aluminium door shutters, aluminium section like lock rail, bottom rail 115mmX38mmX1.00mmthick and top rail and vertical rail 100mmX38mmX1.00mm thick mm including necessary jointing cleats/glazing clipx, rubber neorene paking, handles 02 Nos in each door, locking arrangment, aluminium snap beading screw etc, complete all as specified and directed. (panels likes prelaminated particle board / sheet glass shall be measured and paid seprately) |
| 32 | Taking down aluminium shutterexc. 1 Sqm and n.exc 2 Sqm each and refixing the same opening after resecuring or easing and adjusting shutters and replacement of top rail, lock rail or bottom rail where required of any description. complete all as specified & directed. |
| 33 | Taking down shutters of aluminium of any description exc. 2 sqm each, resecuring and easing, adjusting and refixing in the same opening complete all as specified & directed. |
| 34 | S&F 5 mm thick aluminum composit pannel fixed or laid on door or partition by using rubber based adhesive complete all as specified & directed. |
| 35 | S&F mild steel for framed work such as grills, gratings, etc With ends of bars shouldered and riveted, or forged into spikes, framed guard bars, barred iron doors ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con-forming to Fe. 290. Gde-E-165 complete all as specified & directed. |
| 36 | S&F mild steelwork as in Joist,channel,angle, or tee sections, fixed independently,without connecting plates, etc. ( cut to ordinary lengths i.e within 20 mm of the length indicated , conforming to gde Fe 410-W (Gde E-250) Quality complete all as specified and directed |
| 37 | M&L for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240complete all as specified and directed. |
| 38 | S&F mild steel workas in bands,strap, supports or stay for rainwater, ventilating pipes, includingbolts, if required hooks (stay), heavy, for large gates, hook and pintlehinges, large hasp and staples, chainshand made sliding bolts, clamps, hold fasts, wallties hook for hanging fans,plain angle cleats for secruingpurlins to wood trusses or rafters, knee piece inserts, two way and tree ways straps , plate washers and similar samllarticles confirming to Fe 290 or E-165 complete all as specified and directed |
| 39 | M&L for greasing and oiling in old rolling shutters (area exceeding 10.00 sqm of each shutter) of each parts i.e guide channels, cranks, springs, gearboxt and locking arrangement etc. with and including repairs as required for smooth functining of rolling shutter complite all as specified and directed. |
| 40 | M&L for greasing and oiling in old rolling shutters (area not exceeding 10.00 sqm of each shutter) of each parts i.e guide channels, cranks, springs, gearboxt and locking arrangement etc. with and including repairs as required for smooth functining of rolling shutter complite all as specified and directed. |
| 41 | M&L for greasing and oiling in old steel collapsible shutters (any size) of each parts with and including repairs as required for smooth functining of collapsible shutter complete all as specified and directed. |
| 42 | Taking down carefully unservicable ball bearing from rolling shutters and S&F ball bearing heavy duty as required size at approprite place, match the existing of gear operated type rolling shutter complite all as specified and directed. |
| 43 | Taking down carefully unservicable spring from rolling shutters and S&F new spring heavy duty as required size at approprite place, match the existing of gear operated type rolling shutter complite all as specified and directed. |
| 44 | Taking down carefully unservicable safty lever mild steel lock any type from rolling shutters and S&F newsafty lever mild steel lock 4 lever heavy duty as required size at approprite place, match the existing of gear operated type rolling shutter complite all as specified and directed. |
| 45 | S&F19 mm thick Solid PVC board fixed with steel screw and synthetic adhesive both one side balancing color texture used for shutter of the cabinet / cupboard and completeall as specified and directed. |
| 46 | S&F19 mm thick Solid PVC board fixed with steel screw and synthetic adhesive both side balancing white texture used for shutter of the cabinet / cupboard and completeall as specified and directed. |
| 47 | Providing & fixing false ceiling at all heights with perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. |
| 48 | M&L for Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa it shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm /sqm of coating (total both surfaces) as in roof covering /cladding to wall, fixed with self tapping screws neeoprene and EPDM washerscomplete all as specified and directed. |
| 49 | M&L for Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa it shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm /sqm of coating (total both surfaces) as in roof covering /cladding to wall, fixed with self tapping screws neeoprene and EPDM washerscomplete all as specified and directed. |
| 50 | M&L for 75 mm thick for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in subbase for laying floor finishes complete all as specified and directed. |
| 51 | M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in sub base of floors complete all as specified anddirected. |
| 52 | M&L for non skid Ceramic tiles,first quality( of approved class , colourand design/ shade )6 to 7 mm thick( square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floorsurfaceetc set and jointed in neatcement slurry and pointed in coloured cement to match with coloured tiles overand including 15 mm Screed bed in CM 1: 6 withcomplete all as specified and directed. |
| 53 | M&L for non-skid colouredceramic tiles first quality (of approved class, colour and design/shade) 7 to 8 mm thick (square/rectangular)asin skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 10 mm thick rendering in cement mortar (1:4),with complete all as specified and directed. |
| 54 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of size 300x200x7mm/ 350x250x7mm/ 450x350x7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 55 | M&L vitrifiedcoloured tiles 10 mm thick light shade(square/rectangular) asin floors etc set and jointed in neat cement slurry area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm and pointed in white or coloured cement to match including 15 mm thick cement screed bed in cement mortar 1:6 for laying floor finishes with complete all as specified and directed. |
| 56 | M&Lvitrifiedcoloured tiles 10 mm thick dark shade(square/rectangular)as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tilescomplete all as specified and directed. |
| 57 | M&L for 75 mm thick PCC 1;3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work complete all as specified and directed. |
| 58 | M & L for repair to chajjas including necessary cement concrete type B-0 (1:2:4)12.5 mm graded stone aggregate and15mmthick plastering in CM 1:4 to disturbed portion and finishing the surface with two coats of cement base paintincl preparation of surface complete all as specified and as directed. |
| 59 | M&L for Complete removal of existing treatment of old surface and washing rubbing down and stoping of distempered and painted surfaceof wall and applying two coats of cement based paint complete all as specified and directed. |
| 60 | S&F Auto closing hinges 35mm of 0 crank for kitchen cabinet shutter fixtures and all as specified and directed. |
| 61 | S&F Auto closing hinges 35mm of 8 crank for kitchen cabinet shutter fixtures and all as specified and directed. |
| 62 | S&F Auto closing hinges 35mm of 120 crank for kitchen cabinet shutter fixtures and all as specified and directed. |
| 63 | S&F Ball bearing runners 500mm Telescopic full load extension load capacity of 50 kgs fixed on basket and cabinet walls and all as specified and directed. |
| 64 | S&F Stainless steel handles 150mm size for kitchen cabinet shutters and all as specified and directed. |
| 65 | S&F Chromium plated stailess steel wire basket (storage basket ) pull out type, size 940x580x580mm of grade 304 with necessary fixing clips etcand all as specified and directed. |
| 66 | S&F Chromium plated stailess steel wire basket (cutlery basket ) pull out type , size 480x500x100mm of grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. |
| 67 | S&F Chromium plated stailess steel wire Bottle pull out basket (storagebasket ) pull out type , size 100x150x750mm of grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. |
| 68 | S&F Chromium plated stailess steel wire Thali basket (storagebasket ) pull out type , size 480x150x200mm of grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. |
| 69 | S&F Chromium plated stailess steel wire saucer basket (storagebasket ) pull out type , size 480x500x150mm of grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. |
| 70 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beadsincluding punching or drilling out old glazing pins/spring clips etc complete all as specified and directed. |
| 71 | M&L for 4.8 mm thick sheet glass ordinary quality in panes notexc 0.50 sqm each fixed with & including rubber gasket in aluminium frame work complete all as specified and directed. |
| 72 | M&L for 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each panecomplete all as specified and directed. |
| 73 | M&L for 4 mm thick figured glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each panecomplete all as specified and directed. |
| 74 | M&L for 10 mm thick toughendglass in partition or fixed to aluminium/steel/wooden frame of any size asdesired including polishing round edges frosted type fixed with SS frame/clips/ wall by embedding inside etc complete all as speified and as directed. |
| 75 | Solar control filim 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified & directed. |
| 76 | M&L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 77 | S&F in repair 32 mm dia GI tubing of medium grade as drain out pipe of sunken floor / wall complete all as specified & directed. |
| 78 | S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet,integral foot rest (excluding flushing cistern and flush pipe) & including CI trap & connecting fitting as required set inplain cement concrete (1:3:6) type C-1and connecting to flusing cistern and trap & connecting fittings as required and making good to floor with and including removing WC outside MOD Land complete all as specified and directed. |
| 79 | S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap(excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with and including plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including removing WC outside MOD Land complete all as specified and directed. |
| 80 | S&F in repair vitreous china wash hand basin (flat back) of size 550x400mmincluding one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector,MS brackets 2 numbers including cutting for and pinning in ends of brackets and including removing WHB outside MOD Land complete all as specified and directed. |
| 81 | S&F in repair soap dishbrass, chromium plated, fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. |
| 82 | S&F in repair bibtapsbrass fancy type,brass,chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule orto GI socket complete all as specified and directed. |
| 83 | S&F in repair pillar taps, brass, with capston heads, fancytype chromium plated, screwed down high pressure with or without lettered \"Hot\" or \"cold\" with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 84 | S&F in repair fancy typeangular stopcock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. |
| 85 | S&F in repair Stop valves 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified & directed. |
| 86 | S&F in repair CP unirnal Push Cock incl necessary fittings complete all as specified and directed |
| 87 | S&F in repair CP Urinal Spreaderincl necessary fittings complete all as specified and directed |
| 88 | S&F in repairchromium plated brass hand ablutionhealth fausetwith1.50 meter longflexible tubefancy type with necessary brass nuts & rubber washers cover withchromium plated springcomplete all as specified and directed. |
| 89 | S&F in repair100mm dia cast Iron floortrap, with CP gratingincluding jointing to waste pipe with solventcement and fixed in cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) complete all as specified and directed. |
| 90 | S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic actiontype with inlet ball valve and float, handle with & including bracket andPVC flush pipe 32 mm borecomplete all as specified and directed. |
| 91 | S&F PVC conections 15mm size with PTMT nuts of 450 mm long fixed in repair complete all as specified & directed. |
| 92 | S&F in repair 32 mm bore PVC waste pipe for WHBapproved quality complete all as specified and directed. |
| 93 | S & F in repair tubular towel rail 20mm dia 600mm long of brass chromimum plated complete all as specified and directed. |
| 94 | Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 20 mm dia pipes complete all as specified and directed. |
| 95 | Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 15 mm dia pipes complete all as specified and directed. |
| 96 | S&F for laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing \"medium grade\" with and including all GI fittings such asunions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floorscomplete all as specified and directed. |
| 97 | M&L for refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) for 20 mm dia pipes with and including all new fittings complete all as specified and directed. |
| 98 | S&F for laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing \"medium grade\" with and including all GI fittings such asunions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floorscomplete all as specified and directed. |
| 99 | M&L for refixing old steel tubing and connections in new or old position(walls, ceiling, floors, etc.) for 15 mm dia pipes with and including all new fittings complete all as specified and directed. |
| 100 | Disconnecting & taking down existing water tank of capacity exc 250 liter and not exc. 500 liter and removing from site complte and S&F rotational moulded polyethylene water storage tanks 500 lts capacity (cylindrical verticalwith closed top) hoistedwith and including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part Icomplete all as specified & directed. |
| 101 | Disconnecting & taking down existing water tank of capacity exc 500 liter and not exc. 1000 liter and removing from site complte and S&F rotational moulded polyethylene water storage tanks 1000 lts capacity (cylindrical verticalwith closed top) hoistedwith and including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part Icomplete all as specified & directed. |
| 102 | S&F PVC (SWR) pipe 110 mm bore,single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed. |
| 103 | S&F PVC (SWR) bend 110mm dia , any radiusas required andjointed with approved adhesive complete all as specified and directed. |
| 104 | S&F PVC (SWR) pipe 110 mm bore,single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid trenches or in floor complete all as specified and directed. |
| 105 | S&FPVC (SWR) junction single (Single T) equal or un equal 110mm dia , any radiusas required andjointed with approved adhesive complete all as specified and directed. |
| 106 | S&F in repair PVC water tank covers screw head type including four Nos of PVC nut and bolt in existing PVC water tanks of Cap 500 ltrs to 1000 ltrs cap with fixing arrangement complite all as specified and directed. |
| 107 | Dismantling wrought iron or mild steel work of any description not otherwise described and removal of dismantling materials with and including removing Debris out sideMOD Land at contractor is own arrangement complete all as specified and directed. |
| 108 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing with and including removing Debris out sideMOD Land at contractor is own arrangement complete all as specified and directed. |
| 109 | Demolition of cement concrete (unreinforced) of any description as in ground floors and pavings not exceeding 15cm thickness (above or below ground floors) with and including removing Debris out sideMOD Land at contractor is own arrangement complete all as specified and directed. |
| 110 | Taking down Cast iron/PVC pipe of any dia and size fixed on wall or floor including all fittings and removing of debrish to with and including removing Debris out sideMOD Land at contractor is own arrangement complete all as specified and directed. |
| 111 | Dismantling aluminium orwooden partition work or asbestos cement sheet partition or boarding of any description , fixed in position with nails with and including removing Debris out sideMOD Land at contractor is own arrangement complete all as specified and directed. |
| 112 | Dismantling of wall and ceiling boards any thickness including cover filletes with and including with and including removing Debris out sideMOD Land at contractor is own arrangement complete all as specified and directed. |
| 113 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness complete all as specified and as directed.Notes for item No. 1 to 113:- (i) The work will be carried out upto 6th storey bldgs. Hence necessary complete scaffolding and other safety arrangements will be managed and made by tenderer/ Contractor accordingly at own expense. (ii) Tenderer kind attention is also invited to srl clause 1.16 of Sec-I on srl page No 1 to 150 (General rules for Safety in Construction) as specified in SSR Pt-I (2009) for safety measures/ precautions.(iii) Steel scaffolfing is to be used in the work. (iv) Necessary arrangement for temporary plug the / door / window / ventilator opening at time of taking down plaster/ new plaster till completion of work. Made by Tender / Contractor at own expense. |
