|
| 1 | Providing Water wash and appropriate methodology to restore the originalities of the existing Granite structures inclusive of necessary scaffolding charges, conveyance and all hire charegs for all tools and plants and clearing the site after completeion of work etc., complete. |
| 2 | Pointing the cut stone joints with Lime Mortor1:1.5 20 mm deep using red and yellow oxide and including cost of special tiles such brush and watering, curing etc complete, as per standard specifications. The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works. |
| 3 | Dismantling the One course of pressed tile roof finish in cement mortar etc, complete with standard specifications. |
| 4 | Finishing the top of roof with one course of machine pressed tiles 20cmx 20cmx20mm of approved quality laid in ;LM 1:3,12mm thick mixed with water proofing compound 2% by weight of cement usedetc, complete with standard specifications. |
| 5 | Dismantling the existing Floor finish and dadooing wall in cement mortar with Mosaic Tiles / Glazed Tiles/ cuddapah slabs etc, complete with standard specifications. (SOR P.no:- 28 / (W-0042) |
| 6 | Scraping the decayed lime plaster from the surface of Vimanams and Gopurams, carefully including isolated bricks or brickwork without demaging the vari vargams, racking out the joints, cleaning the surface with water, includinng all working in heights, hire charges for special tooks, brushes complete superficial area including all folds - 100sft. |
| 7 | ( A) Kalkaram) |
| 8 | ( B) Vimanam) Vimanams / Gopurams upto 50\" 0\" height |
| 9 | Clean removal of lime plaster from walls and racking out joints from plastered wall surface including walls as instrcted by departmental officers and as per std specification etc..complete |
| 10 | Plastering with Lime mortar 1:1.5,12mm thick (one Lime and one and half sand ) including cost and conveyance of all materials and all labour charges,curing etc,complete complying with standard specifications.The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works. |
| 11 | Supplying & fixing Teak wood temple type door including all materials, labour charges for manufacturing and fixing in position including all furniture fittings etc complete with std. Specifications |
| 12 | Varnishing new and old wood work two coats of approved quality in all floorsthe rate includescost of all materials, brushes, Scaffolding charges etc.. Complete |
| 13 | Removing the old stone Pavukkal and stacking it for refixing including cost and conveyance labour,handling as per instruction of departmental officers etc.,complete. |
| 14 | Removing the old stone Uthiramand stacking it for refixing including cost and conveyance labour,handling as per instruction of departmental officers etc.,complete. |
| 15 | Removing the old stone pillar and stacking it for refixing including cost and conveyance labour,handling as per instruction of departmental officers etc.,complete. |
| 16 | Removing the old stone Bothiyaland stacking it for refixing including cost and conveyance labour,handling as per instruction of departmental officers etc.,complete. |
| 17 | Supply of cut stone for carrying out Pillars, Pavukkal , Uthiram and all hire charegs for all tools and plants and clearing the site after completeion of work etc., as per instruction of departmental officers etc.,complete. |
| 18 | Refixing the old stone Pavukkalincludingpointing with lime mortar 1:1.5 (one part of lime and one and halfpart of sand), labour, conveyance and handling as per instruction of departmental officers etc.,complete. |
| 19 | Labour Charges for new stone fixing thePavukkalincludingpointing with lime mortar 1:1.5 (one part of lime and one and halfpart of sand), labour, conveyance and handling as per instruction of departmental officers etc.,complete. |
| 20 | Refixing the old stone Uthiramincludingpointing with lime mortar 1:1.5 (one part of lime and one and halfpart of sand), labour, conveyance and handling as per instruction of departmental officers etc.,complete. |
| 21 | Refixing the old stone pillar includingpointing with lime mortar 1:1.5 (one part of lime and one and halfpart of sand), labour, conveyance and handling as per instruction of departmental officers etc.,complete. |
| 22 | Refixing the old stone Bothiyalincludingpointing with lime mortar 1:1.5 (one part of lime and one and halfpart of sand), labour, conveyance and handling as per instruction of departmental officers etc.,complete. |
| 23 | Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with Lime Mortor1:1:5 complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped/chiseled bricks, rough-plasteringwith Lime Mortor1:1:5and finishing with final ornamental plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area.for kalkaram. |
| 24 | ( A) Kalkaram) |
| 25 | ( B) Vimanam) Vimanams / Gopurams upto 15\" 0\" height |
| 26 | Dismantling plain Cementconcrete as per instruction of departmental officers etc.,complete std specification |
| 27 | Flooring with cut stone slab of size 600mmX600mm and other sizes suitable for site requirement not less than 100mm thick with machine cut edges and top surface dressed as directed by the departmental officers including cost and conveyance of materials to site and lobour charges for paving and Pointing WithLime Mortor1:1.5 etc complete. |
| 28 | Clean Removal old paint from the surface of wooden door and painting old wood work with two coats of enamel paint of approved quality and colour over one coat etc.. as per standard specifications |
| 29 | Supplying and fixing in postition of Teak wood frames incliding cost and conveyance of materials and matireals as per standard specifications. |
| 30 | A.For Frame |
| 31 | B.For Planks |
| 32 | Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 33 | Dismantling the existing RCC concrete over the roofing withas per instruction of departmental officers etc.,complete. |
| 34 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) |
| 35 | For RCC works in foundation and basement such as pile cap, grid beam, plinth beam, raft beam, & slab, column base & footing, stair case steps etc. |
| 36 | For RCC surface of Columns and a small quantities such as sunshades,sill slabs, parapet cum drops, window boxing, fin projection etc |
| 37 | For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc. |
| 38 | Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers.The coarse and fine aggregates to be used should comply with the requirements of IS Standards.(No separate payment will be made by the Department for the excess usage of materials). |
| 39 | Foundation and Basement |
| 40 | Groundfloor |
| 41 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification.(Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 42 | Supplying and fixingmild steel grill for windows / Gate including costconveyance of all materials and fixing in position including priming coat etc complete with standard specifications. |
| 43 | Paintingiron works such as gate, steel doors windowsventilatorswithtwo coats of approved quality and color of synthetic enamel paint over the existing red oxide primer in allfloor etc, complete complying with standard specifications. |
| 44 | Scaffolding charges for Vimanans andgopurams with casurina posts coconut or plamtrees wherever necessaryfor main, form work and providing with coconut keeth coverings, providing ladder arrangements, country wood pland for working, inpection etc, complete hire charges only for erection, maintainance and removing the same on completion of the work 1 sq,ft. |
| 45 | Vimanam /Gopuram upto 15\" Height |
| 46 | Vimanam /Gopuram upto 25\"0\" Height |
| 47 | Painting with multicolour (Panchavarnam)good Emulsion paints complete for the Vinamans/Gopurams, inculding costand conveyence of all materials, lobour charges inculdinf Artist painter, working in heights, lifting of material, cost of brushes etc,complete-which including all extra for foldings-100sft, superficial area. |
| 48 | Vimanam /Gopuram upto 15\" Height |
| 49 | Vimanam /Gopuram upto 25\"0\" Height |
| 50 | Scraping the old paint and Painting two coat with approved water based Exterior Emulsion over the cement plastered wall surface, ceiling and other new surface including clearing preparing the surface curingin all floors including brushes etc., complete as per specification. -10 m 2 ( S.I. No 358 ) |
| 51 | Providing new sudhai vigrahams in the vimanams and Rajagopurams with galvanised iron rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in Lime Mortor 1:3 finishing the same with Lime Mortor 1:3 bringing to the correct shape (Lakshana) in conformift with silpa sastra inclusive of special ornaments, wiapons, peedam etc., complete and providing C.M. Nayam theervai wherever necessary. inclusive of cost and conveyance of all materials, such as cement broken bricks, and G.I. rods.binding wire all labour for working in heights, curing lifiting of materials etc., complete including cement painting 2 coats over a primary coat (one vigraham is accountable with one head, 4 hands with weapons, ornamental costumes etc., as per prathima lakshans, Vigraham height is measurable from the crown top to the bottom of foot only If peetam is pt\rovided the rate with peetam may be adopted as datailed hereunder) |
| 52 | Sudhai size above1\" 0\" upto 2\" 6\" |
| 53 | Sudhai size above2\" 6\" upto 3\" 6\" |
| 54 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. |
| 55 | Earth work excavation for foundation with all leads and lifts in all soils and sub-soils and to the required depth as may be directed except hard rock requiring blasting inclusive of shoring, strutting and bailing out water wherever necessary refilling the sides of foundation with excavated earth in layers of 150mm thick well consolidated, depositing the surplus earth in places shown and levelling the site with all leads and lifts etc. complete in all respects |
| 56 | Supplying and filling in foundation and basement with Gravel in layers of 150mm thickness well watered rammed and consolidated complying with relevant std specification |
| 57 | Supplying and Filling in foundation and basement with filling sand in layers of not exceeding 15 cm thick well watered, rammed and consolidated complying with relevant standard specification including the cost of supplying filling m-sand etc., complete in all respects as directed by the departmental officers. |
| 58 | Cement concrete 1:5:10 (One cement, five crushed stone sand and ten aggregate) using 40mm gauge hard broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick, well rammed, watered etc., complete complying with standard specification |
| 59 | Damp proof course with Cement Mortar 1:4 (One Cement and Four sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used, finishing and curing etc. complete complying with standard specification. |
| 60 | Brick workusing usingCountryBricks of size 83/4\" x4 1/4\"x 2 3/4 in Cement Mortar 1:5 (One cement and five sand) including curing neat finishing, etc., complete complying with standard specifiction. |
| 61 | Foundation and Basement |
| 62 | Brick workusing usingCountryBricks of size 83/4\" x4 1/4\"x 2 3/4 in Cement Mortar 1:6 (One cement and six sand) including curing neat finishing, etc., complete complying with standard specifiction. |
| 63 | Ground floor |
| 64 | Brick partition walls of 10.80cm thickness using best quality country bricks of size 8-3/4\" x 4-1/4\" x 2-3/4\" in Cement Mortar 1:3 (One Cement and Three crushed stone Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) |
| 65 | Ground floor |
| 66 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 67 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 68 | Flooring with following Joint free Rectified Glazed ceramic tiles of size 305 x 305 x 8 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 69 | Joint free Rectified Glazed ceramic tiles of size 305 x 305 x 8 mm laid over 20 mm thick |
| 70 | Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 71 | Dadooing with colour glazed tiles 450x300x8mm |
| 72 | Paving the floor with best quality Double Charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 73 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers |
| 74 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \"U\" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. |
| 75 | Supplying and fixing rigid PVC panelled door shuttermade from M.S box section of size 19mmx19mm, 19gauge covered with heat moulded PVC 5mm thick and width of 50mm to form styles and rails. The panel shall be 5mm thick PVC rigid foam sheet inserted into the frame sealed to the styles and rails and 5mmx25mm PVC beading is provided on all sides with furniture fittings etc., complete. |
| 76 | Supplying and fixing of Flush door shutter Single leaf in position using 35mm thick solid coreFlushshutters with commercial ply on both sides with teak wood lipping alroundincluding cost and labour for fixing the hold fasts and furniture fittings etc.,complete as directed by the departmental officers complying with standard specification. |
| 77 | UPVC Ventilator Specification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided inthe louvers.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved fromthe Executive Engineer before use on work |
| 78 | UPVC Window Specification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water evenat most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work |
| 79 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works. |
| 80 | 25mm dia PVC Pipe |
| 81 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works. |
| 82 | 25mm dia PVC Pipe |
| 83 | 20mm dia PVC Pipe |
| 84 | 32mm dia PVC Pipe |
| 85 | Supplying and fixing in position the following PVC Specials of heavy type and approved quality and good variety excluding fixing charges but including necessary cutting and threading of GI pipes, jointing the GI specials and painting with two coats with good variety and best quality synthetic enamel paint over a coat of red oxide primer and jointing the specials with pipe line using shellac etc., complete complying with standard specification. (The GI specials should be got approved by the Executive Engineer concerned before use on works.) |
| 86 | 25mm PVC Coupling |
| 87 | 25mm PVC Elbow |
| 88 | 25mm PVC Union |
| 89 | 25mm PVC TEE |
| 90 | 25mm PVC Bend |
| 91 | 20mm PVC Coupling |
| 92 | 20mm PVC Elbow |
| 93 | 20mm PVC Union |
| 94 | 15 mm Pipe Nipple |
| 95 | Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as,15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting |
| 96 | Supplying and fixing in position best Indian make white glazed earthenware Oriya type Indian water closet 580mmx440mm of approved brand and best quality with P or S trap with sand cushion and after conducting necessary leakage test the portion should be filled up withbrick jelly lime concrete 1:2:5 (One lime two sand and five brick jelly using 40mm size broken brick jelly) for 100mm thick encasing the water closet and top left rough to receive the floor finish and giving necessary connection to P.V.C. soil stack including dismantling masonry RCC works wherever necessary and redoing the same to the original condition without any leakage etc.,complete complying with standard specification ( The water closet ‘P’ or ‘S’ trap are to be got approved from the Executive Engineer before use on work).Holes should be left in walls for taking out the pipe from ‘P’ or ‘S’ trap and these should later be plugged with concrete. . |
| 97 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \"B\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 98 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 99 | a. 110 mm PVC Soil Pipe |
| 100 | b. 75 mm PVC Soil Pipe |
| 101 | Supplying and fixing Pvc water tank 1000liters capasity including convenyance loading & loading,inlet & outlet,overflow pipe etc complete |
| 102 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the Executive Engineer before use on the works). |
| 103 | Supplying and fixing position PVC Nahani Trap / Floor Trap of the following sizes with best PVC gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) |
| 104 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 105 | Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) |
| 106 | Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct. |
| 107 | Brick masonary CM1:4 using Stock bricks including all varivargams, mould sthambams mokopathrams,koodu, Nasi and all ornamental brick work complete,all pancharams Agarais, Karanakoodu, etc., forming corewalls of Rajagopuram / Vimanamcomplete including cost and conveyance of all materials including cement, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to requiredheights, curing and all extra for working in heights etc., complete 100 cft. for Kalkaram . |
| 108 | Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with Cement Mortor 1:4 complete including shapping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embdding broken bricks of shaped/chiselled bricks, rough-plasteringwith C.M. 1:4 and finishing withfinal ornamental plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete inculding all axtra for folding and inculuding clearing from the vimanams/gopurams 100sft superficial area.for kalkaram. |
| 109 | Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable Powder coated MS duct with door arrangmentson wall and ceiling with accessories with Module GI switch box on wallwith wall with 6A one way module switch with module front plate with continuous earth wire connection by 14 SWG TC wirefor Open MS ductLight point / fan point (for electronic regulator) (5 points / Coil) Higher End (Data A) |
| 110 | Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigidpipe Concealed inwall and ceiling with PVC accessories with Module GIswitch box in flush with wallwith 6A one way module switch with module front plateand making good of the concealed portion with suitable colourforConcealedPVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Lower End (SD 312 - less cost of 14 SWG TC wire) |
| 111 | Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos.6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End (SD 474) |
| 112 | Supply and fixing of 1 no.6/16A two modulesocket , 1 no.16A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End (SD 486) |
| 113 | Supply and fixing of 15W LED bulb for BH point ( Data B) |
| 114 | Supply and fixing of WT Bulk head fitting with guard and 9W LED bulb (Data-C ) |
| 115 | Supply and fixing of 1200mm (48\") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18\") (SD 549) |
| 116 | Supply and fixing of 450mm 18\"Wall Fan with Pillar Clamp 1½ x ¼ MS flat with boltand nuts for fixingtheFanonpillarwith necessary connection. (Higher end -like Almonard / equivalent) (Data D) |
| 117 | Supply and fixing of 300mm (12\") sweep (light duty) AC exhaust fan complete without provision of hole in the wall (SD 115) |
| 118 | supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and withpainting .(SD 535) |
| 119 | supply and fixing of 65 mm dia. (2 -1/2\") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangementto house 6A SP MCB switch, 2/4 way connector on suitable hylem sheetand supply and fixing of2 nos.100W LED flood light fitting complete set(Higher end) with suitable AI frameComplete withsuitable MS clamps for fixingLED flood light fitting and SMC box with PVC unsheathed copper leads from SMC box to fittingand withpainting of suitable colour . (Data-E ) |
| 120 | supply and fixing of 18W LEDsquare type Recessedfitting with LED (Lower end) onfalse Ceilingwith suitable hanging support from ceilingwith PVC unsheathed copper leads from terminals to the fitting.(SD 529) |
| 121 | Supply and fixing of 32A DP MCB with sheet steel enclosure on wall with earth connection (Higher end) (Data F) |
| 122 | Supply and layingof 2 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good(SD 198) |
| 123 | Supply and clarnpingof 2 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (SD 216) |
| 124 | Supply and fixing of brass cable gland for 2 x 10 sq.mm. PVC armoured LTUG cable with earth connection (SD 182) |
| 125 | Supply and layingof 3 ½x 50 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (SD 206) |
| 126 | Supply and clarnping of 3 ½x50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (SD 224) |
| 127 | Supply and frxing of brass cable gland for 3-1/2 x 50 sq.mm. PVC armoured LTUG cable with earth connection (SD 188) |
| 128 | Supplyandprovidingcableendterminationof3-1/2x50sq.mm.PVCLTUGaluminiumarmouredcablewith necessary aluminium cable sockets by crimping etc with electrical connection complete (SD 237) |
| 129 | Supply and fixng of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2\" x 1-1/2\" x 1/4\" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply andfixingof3Nos.100Afuseunits(500V),1No.neutrallink,copperearthflatofsize1\"x1/4\"withinter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete (SD 130) |
| 130 | Supply and fixing of 100A TPN sheet double break switch with HRC fuse and neutral on suitable angle iron frame work with earth connection only (SD 169) |
| 131 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class \"B\" GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD 233) |
| 132 | Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection (SD 458) |
| 133 | Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCBswitch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only.HigherEnd (SD 652) |
| 134 | Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCBswitch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only.HigherEnd (SD 605) |
| 135 | Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.(SD 399) |
| 136 | Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigidpipe on wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copperwire with painting of suitable colour.(SD 427) |
| 137 | Supply and Run of 2 of 4 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.(SD 44) |
| 138 | Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigidpipe on wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copperwire with painting of suitable colour.(SD 429) |
| 139 | Supply and Run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.(SD 401) |
| 140 | Supply and run of 2 of 6 sq.mm.(84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V gradein suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour (SD 58) |
| 141 | Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.(SD 423) |
| 142 | Drilling of Bore walls anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in Alluvial Soil Sedimentary strata of day and stone shale pebbles boulders etc.By first taking a pilot bore of 140mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs,fuel,labour and drilling at site (Site will shown by the TWAD Board Officers) including construction of mud pit. |
| 143 | 0 to 60M |
| 144 | 60 to 90M |
| 145 | 90 to 120M |
| 146 | Reaming from 150mm dia to 300mm dia bore as directed by dept. officers. |
| 147 | 0 to 60M |
| 148 | 60 to 90M |
| 149 | 90 to 120M |
| 150 | Supply and delivery of vertical wet type submersible pumpset 2 HP capable of discharging with control panel with necessary pipes and fitting and labour charges etc.complete. |
| 151 | 3 PAHSE 2 HP ISI make 4 stage submersible pumpset 100x40 with Excise duty and taxes etc. |
| 152 | 160mm PVC end cup |
| 153 | GM white |
| 154 | 500ML Solvent cement |
| 155 | Bolt and Nut |
| 156 | 50mm PVC Coupling |
| 157 | 50mm PVC Bend |
| 158 | 50mm PVC Elbow |
| 159 | 6 Sqmm 3 core flat Cable |
| 160 | PVC Tap Roll (Empier Tape) |
| 161 | Nool Kandy |
| 162 | Gusket shellac |
| 163 | 50mm class PVC 10 KSC |
| 164 | 150mm CS Casing Medium depth PVC pipe. |
| 165 | 3 Phase panel board - D.O.L with two level guard and auto start( 13390+1951 ) Rate + 4% vat |
| 166 | Slotter charge |
| 167 | Labour charges for inserting 150mm dia M.S Casing pipes assembly (With Slots or without slots)in the drilled hole including welding the joints an packing annular space with Pebbles of size and quality as approved by the Executive Engineer / TWAD Board. |
| 168 | Labour Charges for developing the borewells with air compressor of 300 cfm capacity (minimum 8 hours) including transporation, labour and fuel charges for compressor as directed by TWAD Board Officers and conducting Yield test by \"V\" Notch method. |
| 169 | Supplying laying and jointing HDPEpipe of approved quality and best variety conforming to ISS and with ISImark of 50mm including cutting threading and fixing PVC specials and including earth work exvcavation for 1M depth below ground level etc complete as per standard specifications.(Forsub-marsible pump in borwell class-5 ,1mpa) |
| 170 | sub total |
| 171 | GST 18% |
