Bids Are Invited For 1 St Edge 500 Mm Length One End Tapered 2 Steel Square 200Mm 3 Feeler Gauge 0.01 To 1.0 Mm 4 Inside & Outside Calipers 0 To 200 Mm 5 Divider 200 Mm 6 Steel Rule 300 Mm 7 Measuring Tape 20 Mtr Cloth 8 Die And Tap M8, goa-Goa

Bids Are Invited For 1 ST EDGE 500 MM LENGTH ONE END TAPERED 2 STEEL SQUARE 200MM 3 FEELER GAUGE 0.01 to 1.0 MM 4 INSIDE & OUTSIDE CALIPERS 0 to 200 MM 5 DIVIDER 200 MM 6 STEEL RULE 300 MM 7 MEASURING TAPE 20 MTR CLOTH 8 DIE AND TAP M8 WITH HANDLE 9 DIE AND TAP M10 WITH HANDLE 10 DIE AND TAP M12 WITH HANDLE 11 DIE AND TAP M16 WITH HANDLE 12 DIE AND TAP M20 WITH HANDLE 13 DIE AND TAP M24 WITH HANDLE 14 ADJUSTABLE SPANNER 150 MM 15 ADJUSTABLE SPANNER 200 MM 16 ADJUSTABLE SPANNER 300 MM 17 PIPE WRENCH 350 MM 18 PIPE WRENCH 500 MM 19 PLIER 150 MM 20 PLIER LONG NOSE 21 HALF ROUND 8 1ST CUT FILE WITH HANDLE 22 ROUND 8 1ST CUT FILE WITH HANDLE 23 FLAT 8 1ST CUT FILE WITH HANDLE 24 OIL FUNNEL SMALL 4 25 OIL FUNNEL LARGE 8 26 OIL CAN 150ML 27 PUNCH ROUND OUTING 28 CHISEL FLATE 150 MM 29 CHISEL FLAT 200 MM 30 HACKSAW FRAME 12 INCH SIZE 31 PARALLEL JAW BENCH VICE 150 MM 32 PORT.ELECTRIC HAND DRILL 10MM 33 DRILL BIT 3 to 10 MM 34 GREASE GUN 35 CIRCLIP REMOVER 36 BEARING PULLER THREE LEGS 12 37 BEARING PULLER THREE LEGS 8 38 WOODEN SAW 8 AND 12 1 NO EACH 39 OIL MEASURING JAR 1 LITRE AND 2 LITRES 1 NO EACH 40 CLEANING TRAY 41 VERNIER CALLIPERS 42 TORQUE WRENCH 0 to 500 NM 43 HOLE SAW 5MM to 25MM 44 FLARING TOOL KIT 45 A/C GAS CHARGING MANIFOLD WITH GAUGES 46 MEASURING TAPE 20M LENGTH STEEL FOR TANK SOUNDING 47 STEEL MEASURING TAPE 3 MTR 48 MEASURING TAPE 10 MTR CLOTH 49 STEEL WEDGES 150MM 50 PHILIPS SCREW DRIVER 4 LONG 51 PHILIPS SCREW DRIVER 6 LONG 52 PHILIPS SCREW DRIVER 8 LONG 53 PHILIPS SCREW DRIVER 12 LONG 54 EYE BOLT M 12 55 CENTRE PUNCH TOOL 56 BALL PEIN HAMMER 2.5 LBS 57 HAMMER WOOD 58 SOCKET SPANNER SET UPTO 36 MM SIZE WITH STORAGE BOX 59 SINGLE ENDED OPEN SPANNER UPTO SIZE 36MM 60 DOUBLE END OPEN SPANNER UPTO SIZE 36MM 61 DOUBLE END RING SPANNER UPTO SIZE 36MM 62 ALLEN KEY SET 1MM TO 10MM 63 HOLE PUNCH 64 SCREW DRIVER 4 LONG 65 SCREW DRIVER 6 LONG 66 SCREW DRIVER 8 LONG 67 SCREW DRIVER 12 SIZE 68 WIRE BRUSH FOR CLEANING FILES 69 HACKSAW BLADES SUITABLE FOR 12 INCH HACKSAW FRAME Total Quantity : 678

Refer document

Refer document

Refer document