|
| 1 | Material supply for MGNREGS works |
| 2 | 100 mm channel shoulder 2.5 m long |
| 3 | 15 mm C.P.brass tap |
| 4 | 200 mm Aluminium aldrop |
| 5 | 27.5 cm long wire spring grade no 2 for rolling shutters |
| 6 | 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) |
| 7 | Acrylic exterior paint |
| 8 | Adjustable span ESO+SI (2.35-3.40) |
| 9 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 10 | Anjili wood planks |
| 11 | Anjili wood scantls |
| 12 | Anodised Aluminium handles 125 mm with plate 175 x 32 mm |
| 13 | Anodised Aluminium tower bolt (barrel type)300x10 mm |
| 14 | Aracanut post |
| 15 | Average rate of mild steel round bars for reinforcements |
| 16 | Beam clamp 300-380 mm (450-1070 mm) |
| 17 | Bitumen washer |
| 18 | Black colour dark shade pigment |
| 19 | Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers |
| 20 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
| 21 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
| 22 | Bright finished or black enameled mild steel screws 20 mm |
| 23 | Bright finished or black enameled mild steel screws 40 mm |
| 24 | C.I. bracket for wash basin and sinks |
| 25 | C.P. brass waste 32 mm |
| 26 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
| 27 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
| 28 | Chromium plated Brass screws 25 mm |
| 29 | Chromium plated Brass screws 30 mm |
| 30 | Coarse sand (zone III) |
| 31 | Corner angle 45x45x5 mm 1.50 m long |
| 32 | Double clip (bridge clip) |
| 33 | Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile |
| 34 | Fine sand (zone IV) |
| 35 | Flats up to 10 mm in thickness |
| 36 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 37 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
| 38 | G.I Limpet washer |
| 39 | G.I pipes 50 mm dia |
| 40 | G.I. pipes 40 mm dia |
| 41 | Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots |
| 42 | Galvanised steel J or L hooks 8 mm dia |
| 43 | Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm |
| 44 | GI trafford profile sheet 0.35mm thick |
| 45 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 46 | Hollock ballies 125 mm diameter |
| 47 | Iron hooks & eyes 100 mm |
| 48 | Mild steel round bar 12 mm dia and below |
| 49 | Mild steel tubes hot finished welded type |
| 50 | Pink primer (for wood) |
| 51 | Plastic emulsion paint |
| 52 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
| 53 | Portland Cement |
| 54 | Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm |
| 55 | Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement |
| 56 | PVC bend 110 mm dia |
| 57 | PVC bend 75 mm dia |
| 58 | PVC door Elbow 110 mm dia |
| 59 | PVC Elbow 110 mm dia |
| 60 | PVC end cap 110 mm dia |
| 61 | PVC pipe 110 mm outer dia. 4kgf/cm2 |
| 62 | PVC pipe 25 mm outer dia. 10kgf cm2 |
| 63 | PVC pipe 75 mm outer dia 6kgf/cm2 |
| 64 | PVC Tee 110x110x110mm dia |
| 65 | PVC vent cowl 110 mm dia |
| 66 | Quarry Waste |
| 67 | Red oxide Zinc chromate primer |
| 68 | Rolling shutter made of 80x1.25 mm machine rolled laths |
| 69 | Safeda ballies 125 mm diameter |
| 70 | Second class kail wood in planks |
| 71 | Second class kail wood in scantling |
| 72 | Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 73 | Single clip |
| 74 | Solid blocks of size 30x20x15cm |
| 75 | Solid blocks of size 30x20x20cm |
| 76 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
| 77 | Stone Aggregate(single size): 06 mm nominal size |
| 78 | Stone Aggregate(single size): 10 mm nominal size |
| 79 | Stone Aggregate(single size): 20 mm nominal size |
| 80 | Stone Aggregate(single size): 40 mm nominal size |
| 81 | Stone for masonry work |
| 82 | Structural steel such as tees, angles, channels and R.S. joists |
| 83 | Synthetic enamel paint in black or chocolate shade |
| 84 | Top cover for rolling shutters 1.25 mm thick |
| 85 | Twisted steel/deformed bars |
| 86 | Vibrator (Needle type 40 mm) |
| 87 | Vitreous china flat back wash basin 550x400 mm |
| 88 | Vitreous china pedestal type wate closet |
| 89 | Vitrified floor tile 60x60 cm |
| 90 | wall form panel 1250x500 mm |
| 91 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 92 | Welding by electric plant |
| 93 | White Vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern with all fittings |
| 94 | Wire nails |
