|
| 1 | Part-A : Supplying, installation, testing & commissioning of 13 passenger lift as perasIS: 14665 ammended upto date & latest standards as applicable as required to complete with fillowing specifications:- |
| 2 | Number of passengers: 13 Passenger |
| 3 | Rated speed (m/sec): 01 M/Sec. |
| 4 | Rated capacity (kg): 884 kgs (for 13 passenger) |
| 5 | Entrance: 06 floors( G+5) |
| 6 | Interior: Hairline finish Stainless Steel 304(1.5mm) |
| 7 | Flooring: Granite Flooring with slip-resistant (color shall be as per Institute approval) |
| 8 | Light & Fan: LED light &Cross flow fan with grill |
| 9 | Hall position indicators and buttons: Segment LED Indicators, Tactile button along with additional Brailleinscriptions |
| 10 | Floor: 1,2,3,4,5,6 |
| 11 | Handrail system: SSSlip- resistant with round end Hand railing one side at rear wall shall be able to bear a weight of minimum 250kg. |
| 12 | Travel: As per site. |
| 13 | Stops & Opening: 06 floors( G+5), In front only. |
| 14 | Lift well size: 2450mm(W)x1840mm(D)(without plaster) |
| 15 | Car size: 1500mm(W)x1400mm(D)x2200mm(H) [Car size as per present site condition & approval by EIC] |
| 16 | Clear opening of doors: 900mm(W)x2000mm(H) |
| 17 | Ventilation: As per manufacturer |
| 18 | Operation: Microprocessor based DuplexCollectiveSelective Control with/without Attendant. |
| 19 | Power Supply: 415 Volts ± 10%, 3 Phase, 30 A, 50 Hz AC systems. |
| 20 | Controller type: V3F (Variable Voltage Variable Frequency) |
| 21 | Type of Machine: Gearless / Machine Room less. |
| 22 | Car Enclosure: Stainless steel 304(1.5mm) scratches proof (Hairline Finish) on all sides. |
| 23 | Enclosure for Car door & Landing door: Power operated centre opening glass of size 300 x 1700 doorwith stainless steel 304(1.5mm) hairline finish FIRE RATED door. |
| 24 | Indicators (Car Landing): Digital Direction & Position Indicator |
| 25 | Type of Doors:-(Car: Fire rated upto 120mins Centre Opening) Landing door : FIRE RATED Glass with SS hairline finish enveloped door. |
| 26 | Construction type: Machine Room less |
| 27 | Emergency Car Lighting: Car lighting which turns on immediately when power fails, providing a minimum level of lighting within the car. |
| 28 | Fire Emergency Return: Upon activation of a key switch or a building\"s fire alarm, all calls are canceled, cars immediately return to a specified evacuation floor and the doors open to facilitate the safe evacuation of passengers. |
| 29 | Emergency Landing Device (Automatic rescue Device) with audio announcer: Upon power failure, a car equipped with this function automatically moves and stops at the nearest floor using a rechargeable battery, and the doors open to facilitate the safe evacuation of passengers with audio announcer. Dry type Battery (Maintenance Free) should be used for power backup. |
| 30 | Automatic Door Speed Control: Door load on each floor, which can depend on the type of hall doors, is monitored to adjust the door speed, thereby making the door speed consistent throughout all floors. |
| 31 | Door Load Detector: When excessive door load has been detected while opening or closing, the doors Door Load Detector immediately reverse. |
| 32 | Door Nudging Feature — With Buzzer: A buzzer sounds and the doors slowly close when they have remained open for longer than the preset period. |
| 33 | Multi-beam Door Sensor: Multiple infrared-light beams cover at least 2/3 of the door height of the doors to detectpassengers or objects as the doors close. |
| 34 | Reopen with Hall Button: Closing doors can be reopened by pressing the hall button corresponding to the traveling direction of the car. |
| 35 | Repeated Door-close: Should an obstacle prevent the doors from closing, the doors will repeatedly open and close until the obstacle is cleared from the doorway. |
| 36 | Safety Door Edge: The sensitive door edge detects passengers or objects during door closing. |
| 37 | Automatic Bypass: A fully-loaded car bypasses hall calls in order to maintain maximum operational efficiency. |
| 38 | Car Fan Shut Off — Automatic: If there are no calls for a specified period, the car ventilation fan will automatically turn off to conserve energy. |
| 39 | Car Light Shut Off — Automatic: If there are no calls for a specified period, the car lighting will automatically turn offto Conserve energy. |
| 40 | False Call Canceling— Automatic: If the number of registered car calls does not Correspond to the car load, all calls are canceled to avoid unnecessary stops. |
| 41 | False Call Canceling— Car Button Type:If a wrong car button is pressed, it can be canceled by quickly pressing the same button again twice. |
| 42 | Overload Holding Stop: A buzzer sounds with over load indication to alert the passengers that the car is overloaded. The doors remain open and the car will not leave that floor until enough passengers exit the car. |
| 43 | Safe Landing Service: Ifacarhasstoppedbetween floors due to some equipment malfunction, the controller checks the cause, and if it is consideredsafeto move the car, the car will move to the nearest floor at a low speed and the doors will open. |
| 44 | Basic Announcement Electronic: Asynthetic voice(and/orbuzzer)alerts Passengers inside a car that elevator operation has been temporarily interrupted by overloading ora similarcause. (Should bein Hindi & English language.) |
| 45 | LED Position Indicator:LED / TFT Segmented Display for car operating panels shows the date and time, car position, travel direction and elevator status messages. |
| 46 | Hall LCD / LED Position Indicator: DisplayLCD / LED for elevator halls shows the date and time, car position, travel direction and elevator status messages. |
| 47 | Provision of CCTV and connection with institute EPABX Telephone including wiring: Yes |
| 48 | Emergency intercom phone system incorporated on cabin operating paneland Provision of Intercom including wiring with centralized features.: Yes |
| 49 | Confirming to Quality Standard: IS/ISO-9001:2015 |
| 50 | Provision of Floor announcement with all time music: Yes |
| 51 | Provision of Single Phase/ phase failure sensingfor ARD: Yes |
| 52 | Provision of auto-correction of Phase reversal: Yes |
| 53 | SS plate Safety instruction inside the car : Yes |
| 54 | Lift shall be accessible to person with disabilities: Yes |
| 55 | Over speed Governor : Yes |
| 56 | Counterweight screen: Yes |
| 57 | Provision for Fireman Switch: Yes |
| 58 | (* The bidders have to specify the make of the lift .) |
| 59 | Buyback of old dismantled lift |
| 60 | Dismantling, disconnecting and removal of old existing lift.complete as required as instructed by EIC. |
| 61 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. |
