|
| 1 | Providing, installation, testing and commissioning of 7.5 H.P (5.5 KW), 8 Stage submersible pump set, Totaly enclosed, Water filled, Head range 58-72 mtrs, Outlet delivery pipe size-80 mm, Discharge range 0-960 LPM, Suitable for 3-Phase, 415 volts, AC supply, Frequency 50 Hz, Specially, method of starting-star delta, Designed seals & sand guard to avoid sand entry, with suitable size nipple and flange, including lowering of pump set in existing tube well etc as required at site. (Make- Havells/ CRI/Kirloskar/Crompton) |
| 2 | Providing and fixing of 6 sqmm, flat three core 1100 Volt, PVC insulated & PVC sheathed cable for submersible pumpmotor etc as required from submersible pump set to electrical panel/ starter. (make -Havells/ KEI/Finolex/ Anchor/ Polycab ). |
| 3 | Providing and Fixing of 8 sqmm GI guard Wire to support for sumbersible pump i/c connection items on both end in the borewell etc as required of ISI Mark. |
| 4 | Providing & laying of one number PVC insulated and PVC sheathed Armoured / XLPEpower cable of 1.1 KV grade of size 3.5x 35 sqmm, direct in ground including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering Conf. to IS:7098 part - I of make Havells / Polycab /Finolex/KEI. |
| 5 | SITC of Double door Feeder pillar totally enclosed out Door type made of 2 mm thick MS sheet of size 700 mm X 500 mm X 400 mm depth having front Door hinged type and ventilation with locking arrangement, Door handle, with detachable gland plate, providing and fixing of Suitable angle iron of size 40 mm x 40 mm x 5 mm thick having 600 mm long 04 nos legs including cutting, welding etc, panel should be suitableto accommodate (i) MCCB, 63 A of 27 kA , Ics = 100% Icu, FP-1 No.make-Havells/ABB/L&T. (ii) Three Phase Automatic Star Delta Submersible Pump Controller suitable for 7.5 HP with phase preventer and over load relay(if required) MakeHavells (Agri series, cat. no. IHSASAJ1*A)- 01 No. or similiar specifications of L&T/ Crompton /C&S /HPL /kirloskar of ISI Mark only (iii) Phase Indicator (RYB) set-01 No. along with grouting the same in cement concrete foundation in 1:3:6 (1 Cement: 3 Corse sand : 6 graded stone chips aggregate) etc as required. |
| 6 | Providing and lowering of 6 mtr, 80 MM GI Pipe (Medium class) with suitable size flange including rubber gaskit, nut, bolt and washer in existing tube well including cutting, welding etc as required. Make Jindal/TATA/Prince etc |
| 7 | Providing and fixing of MS clamp for holding of pump, tube well cover, GI Elbow (80 mm) and Non return ball (NRB) valve etc as required. |
| 8 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 9 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 10 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 11 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (i) 3.5 X 35 sq. mm (32mm). |
