|
| 1 | OVER HEAD CABINETSOver Head Storage- Size : 450mm(D) & 600mm (H)/Site Requirement(H) Storage Cabinet: Providing and fixing overhead storage cabinet formed of 18 mm Marine plywood of approved make finished with 1.5 mm laminates of approved shed and pattern with adjustable shelves of 18mm thick marine plywood as per drawings.Shutters:Shutter of overhead cabinet to be formed of 18mm ply finished with 1.5 mm laminate of approved colour and pattern,with auto closing spring loaded hinges (hydraulic type) and aluminium profile handles all complete . All external exposed edges to be finished with 2mm thick PVC edge band of approved shade.(front area to be measured) Note-Rate shall be inclusive of all necessary approved fittings like auto closing spring loaded hinges, locks, aluminium profile Handles,tower bolts, and all necessary hardware items. (front area to be measured) |
| 2 | FULL HEIGHT STORAGE UNITProviding and fixing storage units of full/ low height as per drawing. They shall consist of 18mm thk. marine ply top, sides, bottom, shelves and shutters & 8mm thk marine ply for back. The bottom of the storages shall be at 75mm from FFL. The shutter with box type higes of approved make & teak lipping finished with melamine and with approved laminate on all the shutter edges.Division of the shutters shall be made equally according to the length of the storages ( as approved by Engineer In-Charge/ architect). All the external surfaces including back shall be finished with 1.0mm thk. Laminate of approved make. 18mm thk. marine Ply shelves at 16” interval (approximately / divided equally) or as specified in drawing shall be provided. All inner surfaces shall be finished with laminate including the shutters. The cabinet has group locks, hinges,stopper, and magnate, handles of approved make & quality and provided S.S. satin finished handle of approved shape,size & make all complete.Note- Rate shall be inclusive of all necessary approved fittings like hinges,magnets, locks, 150mm long SS satin finish handles, and any necessary hardware items. (front area to be measured) |
| 3 | DOUBLE SKIN PARTITION Providing and fixing full height double skin type Partition Main Frame: -Aluminium sections of 16 Gauge of size 50x50 mm Aluminium section verticals at minimum 600mm Centre to Centre spacing and 50 X 25 mm size Aluminium sections horizontal at 600mmCentre-Centre spacing. Extra frame below slab soffit for conduit to run above.(Make - Jindal, Indal, Hindalco) Skin: 12mm thk marine ply backing on both side screwed with frame as per the drawing.Finish: Finished with 2mm thick laminate of approved make. Laminate shall be fixed on plywood skins with glue having grooves as shown in the drawing or as directed by Engineer In Charge *The rate shall be also inclusive of pattas & bands, grooves at any level, any design in veneer, textures etc including the necessary framing/ openings for Electrical, Telephone & AC outlets. Front area to me measured & opening for the door should be deducted for payment.** Note -Rate for high partition to include the cost of framework above false ceiling as required to fix the same to the ceiling slab for which no extra payment shall be made and the rate quoted shall be inclusive of the same. |
| 4 | 12MM THICK TOUGHENED GLASS FIXED PARTITIONS WITH FILMING:Providing and fixing in position 12mm clear float toughened Glass partition with patch fittings for the full height glass partitions as per the direction of the engineer-in-charge. The work to include making necessary template for all the glasses and then cutting the clear float glass to correct size, making all the necessary holes, cuts etc., then toughen the same.The cost to include all hardware (PATCH FITTINGS etc) required of Hettich/Haffele/Dorma or approved equivalent make viz., single corner patch, top and bottom corner patch etc. or as per the direction of the engineer-in- charge, along with etching with sand blasting as per design and drawing. The maximum size of each glass shall be 1200mm to 2000mm x 2400mm to 2700mm as per the site requirement. The rate is for a finished item of work etc., complete as directed.**Note- The cost to include the cost of bevelling and smoothening of the exposed edges of the glass |
| 5 | 12MM THICK TOUGHENED GLASS DOORS WITH ETCHINGProviding and fixing in position 12mm clear float toughened Glass for naked glass door. The work to include making necessary template for all the glasses and then cutting the clear float glass to correct size, making all the necessary holes, cuts etc., and then toughening the same. The cost to include all hardware required viz., Hettich/Haffele/Dorma make floor spring with its accessories, top pivot, center lock, 450mm glass door handles etc., along with etching with sand blasting as per design and drawing. The maximum size of each glass shall be as per the drawing or the direction of the Engineer-in-charge. The rate is for a finished item of work etc., complete as directed. |
| 6 | WPC DOOR & FRAMEProviding and fixing of WPC Door with Frame,Door Frame: 100mm X 50mm Wood Plastic Composite materials water resistance, fire resistance and termite resistance door frame fixed to the wall/partition with fastners/self taping screws of appropriate size,finished with ducco paint all complete as per direction of Engineer-incharge. Door Shutter: 30mm thick Wood Plastic Composite door shutter of size 900 X 2100mm , waterresistance, fire resistance and termite resistance door shutters of approved make, surface finished with ducco paintincludingapproved 4 no.of SS door hinges, 2-SETS OF DORMA/HAFELE MAKE \"\"H\"\" Handle with dead lock1side key & thumb-knob the other side & 1-set ofDORMA/HAFELE make door closer, all completeas per direction of Engineer-incharge. Note-Rate shall be inclusive of all necessary ducco paintings work(for both frame & Shutters), fasteners, self taping screw & other approved fittings like SS Door hinges,Handle with dead lock, approved door closer,tower bolts, and any necessary hardware items. (front area to be measured) |
| 7 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete |
| 8 | WORKING TABLEProviding and fixing in position single level work station of ht. 750mm . Table top min. 600 mm width made out of 18mm thick Marine Plywood of approved make finished with 1.5mm thick laminate of approved colour and pattern for all exposed surface resting over vertical supports and the Inner Surfaces shall be finished with 0.8mm thick laminate of approved colour and pattern complete as specified in the drawing and directed by Engineer In Charge.(Cable Manager to be provided) (The width of the table shall be as per site requiremnets but not less than 600mm)All internal surfaces to be finished with 0.8mm thick balancing laminate of approved shade.Cost to include Borer/Antitermite treatment for wood/plywood |
| 9 | SIDE STORAGE UNITProviding and fixing side storage unit with three drawers runningboth sides on soft closingTelescopic (channels) of approved make, made of 18 mm thick commercial ply with 1.5 mm thick laminate on front face and drawer locks to be provided on one side of the counter as per layout. The sides of the drawers shall be made of 18 mm thick Marine plywood, bottom of 12 mm thick plywood & front of 18 mm thick commercial ply. Drawer to be installed with following hardware: 1 no multi purpose lock as specified & aluminium profile handle of approved make. All the visible/exposed edges shall be provided with 2 mm thick PVC edgebanding all complete as shown in the drawings and directed by Engineer In Charge. Note-The rate shall be inclusive ofnecessary fittings, fixtures, hardware such as channels, hinges, multipurpose lock, aluminium profile handles of approved make,etcas per drawing or instructions of Engineer-In-charge. |
| 10 | MODULAR WORKSTATIONS(LINEAR)- 1200 x 600 Providing and placing panel & tile based modular workstation, with partition thickness as 52.4 mmthk and ht -1200 including powder coated aluminium trims. Tiles: Combination of top tiles are fabric tile. Bottom tiles - Plain metal. SPLIT Tiles: Combination of two finishes for the top tiles on the user side shall be split fabric tackable along with split white board.INTERMEDIATE BLOCKS Intermediate blocks are given in DL + DL finsh.Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs -metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look.Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1200 mm w x 600 mm d. Pedestals with legs - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors KBPT with mousetray -metalNote: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring. |
| 11 | MODULAR WORKSTATIONS (CORNER) - 1500 X 1500 X 600 Providing and placing panel & tile based modular workstation, with partition thickness as 52.4 mmthk and ht -1200 including powder coated aluminium trims.Tiles: Combination of top tiles are fabric tile. Bottom tiles - Plain metal. SPLIT Tiles: Combination of two finishes for the top tiles on the user side shall be split fabric tackable along with split white board.INTERMEDIATE BLOCKS Intermediate blocks are given in DL + DL finsh.Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks.legs -metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look.Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500 mm w1 X 1500 MM w2 x 600 mm d. Pedestals with legs - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors KBPT with mousetray -metal Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring |
| 12 | MID BACK CHAIRProviding and placing in position Medium back chair.The seat and back shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam shall be designed with contoured lumbar support for extra comfort. The seat shall be extra thick foam on front edge to give comfort to popliteal area. The dimensions of back shall be 47.5 cm(W) x 58.0 cm(H) and of seat shall be47.0 cm (W) x 48.0 cm (D). The HR polyurethane foam shall be moulded with density= 45±2 kg/m3 and hardness load 16 ± 2 kgf as. per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co.polymer Polypropylene. Overall Dimensions of Chair shall be Seat Height - 46.5cm, Height - 89.5cm, Width & Depth of Chair as measured from pedestal - Width-61.4 cm and Depth-64.5 cm.Complete all as per the direction of Engineer in charge.The product should be certified with BIFMA and Greenguard. |
| 13 | RECEPTION COUNTER-IProviding and fixing of multilevel reception counter of size 6950 mm (L) x 1050 mm (H) as per the drawing & detail. The counter at upper level, all sides and front panel / front facia/ modesty panel is formed of 19mm thick Marine Plywood and 12mm ply boxing finished with 1.5 mm laminate of approved shade and pattern,Lower level counter formed out of19mm Marine ply finished with counter top of 12mm thick solid acrylic surface- corian of approved shade and finishas per details. 2 Nos Flip top of 850mm with 19mm plywood and 1.5 mm laminate of approved shade and pattern on both sides with suitable hinges to be provided as per the detailBasic price of Laminate Rs 80/- Per Sqm , cost of corian 9,000/- per sqm. (Cable Manager to be provided).All internal surfaces to be finished with 0.8mm thick balancing laminate of approved shade.Cost to include Borer/Antitermite treatment for wood/plywood Note- The rate shall be inclusive of CPU trolley of approved make, necessary fittings, fixtures, hardware such as channels, hinges, ball catches, automatic locking arrangament, wire managers etc including providing the necessary openings for electrical/computer wiring complete as per drawing or instructions of Engineer-In-charge. |
| 14 | RECEPTION COUNTER-IIProviding and fixing of multilevel L-Shaped Reception counter of size 2600 mmx 2100 mm , 1050 (H) and/or as per the drawing & detail. The counter at upper level, all sides and front panel / front facia/ modesty panel is formed of 19mm thick Marine Plywood and 12mm ply boxing finished with 1.5 mm laminate of approved shade and pattern,Lower level counter formed out of19mm Marine ply finished with counter top of 12mm thick solid acrylic surface- corian of approved shade and finishas per details. 2 Nos Flip top of 850mm with 19mm plywood and 1.5 mm laminate of approved shade and pattern on both sides with suitable hinges to be provided as per the detailBasic price of Laminate Rs 80/- Per Sqm , cost of corian 9,000/- per sqm. (Cable Manager to be provided)All internal surfaces to be finished with 0.8mm thick balancing laminate of approved shade.Cost to include Borer/Antitermite treatment for wood/plywood Note- The rate shall be inclusive of CPU trolley of approved make, necessary fittings, fixtures, hardware such as channels, hinges, ball catches, automatic locking arrangament, wire managers etc including providing the necessary openings for electrical/computer wiring complete as per drawing or instructions of Engineer-In-charge |
| 15 | RECEPTION COUNTER-IIIProviding and fixing of multilevel L-Shaped Reception counter of size 4575 mmx 2200 mm , 1050 (H) and/or as per the drawing & detail. The counter at upper level, all sides and front panel / front facia/ modesty panel is formed of 19mm thick Marine Plywood and 12mm ply boxing finished with 1.5 mm laminate of approved shade and pattern,Lower level counter formed out of19mm Marine ply finished with counter top of 12mm thick solid acrylic surface- corian of approved shade and finishas per details. 2 Nos Flip top of 850mm with 19mm plywood and 1.5 mm laminate of approved shade and pattern on both sides with suitable hinges to be provided as per the detailBasic price of Laminate Rs 80/- Per Sqm , cost of corian 9,000/- per sqm. (Cable Manager to be provided)All internal surfaces to be finished with 0.8mm thick balancing laminate of approved shade.Cost to include Borer/Antitermite treatment for wood/plywood Note- The rate shall be inclusive of CPU trolley of approved make, necessary fittings, fixtures, hardware such as channels, hinges, ball catches, automatic locking arrangament, wire managers etc including providing the necessary openings for electrical/computer wiring complete as per drawing or instructions of Engineer-In-charge. |
| 16 | SUB-REGISTRATION COUNTERSProviding and fixing of multilevel L-Shaped Reception counter of size 6500 mmx 3375 mm , 1050 (H) and/or as per the drawing & detail. The counter at upper level, all sides and front panel / front facia/ modesty panel is formed of 19mm thick Marine Plywood and 12mm ply boxing finished with 1.5 mm laminate of approved shade and pattern,Lower level counter formed out of19mm Marine ply finished with counter top of 12mm thick solid acrylic surface- corian of approved shade and finishas per details. 2 Nos Flip top of 850mm with 19mm plywood and 1.5 mm laminate of approved shade and pattern on both sides with suitable hinges to be provided as per the detailBasic price of Laminate Rs 80/- Per Sqm , cost of corian 9,000/- per sqm. (Cable Manager to be provided)All internal surfaces to be finished with 0.8mm thick balancing laminate of approved shade.Cost to include Borer/Antitermite treatment for wood/plywood Note- The rate shall be inclusive of CPU trolley of approved make, necessary fittings, fixtures, hardware such as channels, hinges, ball catches, automatic locking arrangament, wire managers etc including providing the necessary openings for electrical/computer wiring complete as per drawing or instructions of Engineer-In-charge. |
| 17 | NURSE STATION (TYPE -I)Providing and fixing of Single level L- type Nurse Station of 6250 mmx 1900 mm (L)& 750 (H) and/or sizeas per the drawing. The counter all sides, top and front panel / front facia/ modesty panel is formed of 19mm thick Marine Plywood finished with 1.5 mm Laminate of approved shade and pattern and 12mm ply boxing (wherever required). Topfinished with counter top of 12mm thick solid acrylic surface- corian of approved shade and finishas per details,Flip top of 750 mm with 19mm plywood and 1.5 mm laminate of approved shade and pattern on both sides with suitable hinges to be provided as per the detail.Basic price of Laminate Rs 80/- per sqm , cost of corian 9,000/- per sqm. (Cable Manager to be provided) All internal surfaces to be finished with 0.8mm thick balancing laminate of approved shade.Cost to include Borer/Antitermite treatment for wood/plywood. Note- The rate shall be inclusive of CPU trolley of approved make, necessary fittings, fixtures, hardware such as channels, hinges, ball catches, automatic locking arrangament, wire managers etc including providing the necessary openings for electrical/computer wiring complete as per drawing or instructions of Engineer-In-charge. |
| 18 | NURSE STATION (TYPE -II)Providing and fixing of Single level L- type Nurse Station of 4300 mmx 1600 mm (L)& 750 (H) and/or sizeas per the drawing. The counter all sides, top and front panel / front facia/ modesty panel is formed of 19mm thick Marine Plywood finished with 1.5 mm Laminate of approved shade and pattern and 12mm ply boxing (wherever required). Topfinished with counter top of 12mm thick solid acrylic surface- corian of approved shade and finishas per details,Flip top of 750 mm with 19mm plywood and 1.5 mm laminate of approved shade and pattern on both sides with suitable hinges to be provided as per the detail.Basic price of Laminate Rs 80/- per sqm , cost of corian 9,000/- per sqm. (Cable Manager to be provided)All internal surfaces to be finished with 0.8mm thick balancing laminate of approved shade.Cost to include Borer/Antitermite treatment for wood/plywood. Note- The rate shall be inclusive of CPU trolley of approved make, necessary fittings, fixtures, hardware such as channels, hinges, ball catches, automatic locking arrangament, wire managers etc including providing the necessary openings for electrical/computer wiring complete as per drawing or instructions of Engineer-In-charge. |
| 19 | NURSE STATION (TYPE -III)Providing and fixing of Single level L- type Nurse Station of 3575 mmx 1875 mm (L)& 750 (H) and/or sizeas per the drawing. The counter all sides, top and front panel / front facia/ modesty panel is formed of 19mm thick Marine Plywood finished with 1.5 mm Laminate of approved shade and pattern and 12mm ply boxing (wherever required). Topfinished with counter top of 12mm thick solid acrylic surface- corian of approved shade and finishas per details,Flip top of 750 mm with 19mm plywood and 1.5 mm laminate of approved shade and pattern on both sides with suitable hinges to be provided as per the detail.Basic price of Laminate Rs 80/- per sqm , cost of corian 9,000/- per sqm. (Cable Manager to be provided) All internal surfaces to be finished with 0.8mm thick balancing laminate of approved shade.Cost to include Borer/Antitermite treatment for wood/plywood. Note- The rate shall be inclusive of CPU trolley of approved make, necessary fittings, fixtures, hardware such as channels, hinges, ball catches, automatic locking arrangament, wire managers etc including providing the necessary openings for electrical/computer wiring complete as per drawing or instructions of Engineer-In-charge. |
| 20 | NURSE STATION (TYPE -IV)Providing and fixing of Single level L- type Nurse Station of 2880 mmx 1800 mm (L)& 750 (H) and/or sizeas per the drawing. The counter all sides, top and front panel / front facia/ modesty panel is formed of 19mm thick Marine Plywood finished with 1.5 mm Laminate of approved shade and pattern and 12mm ply boxing (wherever required). Topfinished with counter top of 12mm thick solid acrylic surface- corian of approved shade and finish complete as per drawing and details.Basic price of Laminate Rs 80/- per sqm , cost of corian 9,000/- per sqm. (Cable Manager to be provided)All internal surfaces to be finished with 0.8mm thick balancing laminate of approved shade.Cost to include Borer/Antitermite treatment for wood/plywood.Note- The rate shall be inclusive of CPU trolley of approved make, necessary fittings, fixtures, hardware such as channels, hinges, ball catches, automatic locking arrangament, wire managers etc including providing the necessary openings for electrical/computer wiring complete as per drawing or instructions of Engineer-In-charge. |
| 21 | NURSE STATION (TYPE -V)Providing and fixing of Single level L- type Nurse Station of 4025 mmx 1800 mm (L)& 750 (H) and/or sizeas per the drawing. The counter all sides, top and front panel / front facia/ modesty panel is formed of 19mm thick Marine Plywood finished with 1.5 mm Laminate of approved shade and pattern and 12mm ply boxing (wherever required). Topfinished with counter top of 12mm thick solid acrylic surface- corian of approved shade and finishas per details,Flip top of 750 mm with 19mm plywood and 1.5 mm laminate of approved shade and pattern on both sides with suitable hinges to be provided as per the detail.Basic price of Laminate Rs 80/- per sqm , cost of corian 9,000/- per sqm. (Cable Manager to be provided) All internal surfaces to be finished with 0.8mm thick balancing laminate of approved shade.Cost to include Borer/Antitermite treatment for wood/plywood. Note- The rate shall be inclusive of CPU trolley of approved make, necessary fittings, fixtures, hardware such as channels, hinges, ball catches, automatic locking arrangament, wire managers etc including providing the necessary openings for electrical/computer wiring complete as per drawing or instructions of Engineer-In-charge. |
| 22 | NURSE STATION (TYPE -VI)Providing and fixing of Single level Nurse Station of 2100 mm (L) x 750 mm (H) sizeas per the drawing. The counter all sides, top and front panel / front facia/ modesty panel is formed of 19mm thick Marine Plywood finished with 1.5 mm Laminate of approved shade and pattern and 12mm ply boxing (wherever required). Topfinished with counter top of 12mm thick solid acrylic surface- corian of approved shade and finishas per details,Flip top of 750 mm with 19mm plywood and 1.5 mm laminate of approved shade and pattern on one side with suitable hinges to be provided as per the detail.Basic price of Laminate Rs 80/- per sqm , cost of corian 9,000/- per sqm. (Cable Manager to be provided)All internal surfaces to be finished with 0.8mm thick balancing laminate of approved shade.Cost to include Borer/Antitermite treatment for wood/plywoodNote- The rate shall be inclusive of CPU trolley of approved make, necessary fittings, fixtures, hardware such as channels, hinges, ball catches, automatic locking arrangament, wire managers etc including providing the necessary openings for electrical/computer wiring complete as per drawing or instructions of Engineer-In-charge. |
| 23 | NURSE STATION (TYPE -VII)Providing and fixing of Single level Nurse Station of 5900 mm (L) x 750 mm (H) sizeas per the drawing. The counter all sides, top and front panel / front facia/ modesty panel is formed of 19mm thick Marine Plywood finished with 1.5 mm Laminate of approved shade and pattern and 12mm ply boxing (wherever required). Topfinished with counter top of 12mm thick solid acrylic surface- corian of approved shade and finishas per details,Flip top of 750 mm with 19mm plywood and 1.5 mm laminate of approved shade and pattern on one side with suitable hinges to be provided as per the detail.Basic price of Laminate Rs 80/- per sqm , cost of corian 9,000/- per sqm. (Cable Manager to be provided) All internal surfaces to be finished with 0.8mm thick balancing laminate of approved shade.Cost to include Borer/Antitermite treatment for wood/plywoodNote- The rate shall be inclusive of CPU trolley of approved make, necessary fittings, fixtures, hardware such as channels, hinges, ball catches, automatic locking arrangament, wire managers etc including providing the necessary openings for electrical/computer wiring complete as per drawing or instructions of Engineer-In-charge. |
| 24 | NURSE STATION (TYPE -VIII)Providing and fixing of Single level C- Type Nurse Station of 1600 mm x 3880 mm x 1600 mm , 750mm (H) sizeas per the drawing. The counter all sides, top and front panel / front facia/ modesty panel is formed of 19mm thick Marine Plywood finished with 1.5 mm Laminate of approved shade and pattern and 12mm ply boxing (wherever required). Topfinished with counter top of 12mm thick solid acrylic surface- corian of approved shade and finishas per details,Flip top of 750 mm with 19mm plywood and 1.5 mm laminate of approved shade and pattern on one side with suitable hinges to be provided as per the detail.Basic price of Laminate Rs 80/- per sqm , cost of corian 9,000/- per sqm. (Cable Manager to be provided)All internal surfaces to be finished with 0.8mm thick balancing laminate of approved shade.Cost to include Borer/Antitermite treatment for wood/plywoodNote- The rate shall be inclusive of CPU trolley of approved make, necessary fittings, fixtures, hardware such as channels, hinges, ball catches, automatic locking arrangament, wire managers etc including providing the necessary openings for electrical/computer wiring complete as per drawing or instructions of Engineer-In-charge. |
| 25 | SECURITY STATION/ENQUIRY-IProviding and fixing of C Shape (2800mm x 2400mmx 1700mm) multilevel help desk of sizeas specified in the drawing. The counter at upper level, sides and front panel / front facia/ modesty panel is formed of 19mm thick Marine Plywood and 12mm ply boxing(wherever required),Lower level counter formed out of19mm Marine ply finished with counter top of 12mm thick solid acrylic surface- corian of approved shade and finishas per details.Flip top of 750mm with 19mm plywood and 1.5 mm laminate of approved shade and pattern on both sides with suitable hinges to be provided as per the detail.Basic price of Laminate Rs 80/- per sqm , cost of corian 9,000/- per sqm. (Cable Manager to be provided)All internal surfaces to be finished with 0.8mm thick balancing laminate of approved shade.Cost to include Borer/Antitermite treatment for wood/plywood Note- The rate shall be inclusive of CPU trolley of approved make, necessary fittings, fixtures, hardware such as channels, hinges, ball catches, automatic locking arrangament, wire managers etc including providing the necessary openings for electrical/computer wiring complete as per drawing or instructions of Engineer-In-charge. |
| 26 | SECURITY STATION/ENQUIRY-IIProviding and fixing of L Shape (2750mm x 2250mm) multilevel Enquiry Counter of sizeas specified in the drawing. The counter at upper level, sides and front panel / front facia/ modesty panel is formed of 19mm thick Marine Plywood and 12mm ply boxing(wherever required),Lower level counter formed out of19mm Marine ply finished with counter top of 12mm thick solid acrylic surface- corian of approved shade and finishas per details.Flip top of 750mm with 19mm plywood and 1.5 mm laminate of approved shade and pattern on both sides with suitable hinges to be provided as per the detail.Basic price of Laminate Rs 80/- per sqm , cost of corian 9,000/- per sqm. (Cable Manager to be provided)All internal surfaces to be finished with 0.8mm thick balancing laminate of approved shade.Cost to include Borer/Antitermite treatment for wood/plywood Note- The rate shall be inclusive of CPU trolley of approved make, necessary fittings, fixtures, hardware such as channels, hinges, ball catches, automatic locking arrangament, wire managers etc including providing the necessary openings for electrical/computer wiring complete as per drawing or instructions of Engineer-In-charge. |
| 27 | PHARMACY DISTRIBUTION Providing and fixing of multilevel Pharmacy Distribution counter of 5800 mm (L) & 1050 mm (H) size and/or as per drawing & detail. The counter at upper level and front panel / front facia/ modesty panel is formed of 19mm thick Marine Plywood and 12mm ply boxing(wherever required), 450mm extended front panel of 12 mm toughened glass with all patch fitings and opening as specified, Lower level counter formed out of19mm Marine ply finished with counter top of 12mm thick solid acrylic surface- corian of approved shade and finishas per details. Fixed Partition with 12 mm thick MDF board finished with 1.5 mm laminate of approved shade and pattern for variable height (600-900 mm) above extended front glass panel, supported with anodised aluminium frames of required size and thickness wherevere required. Provision of doorinstallation shall also be ensured, (Doors and Frame to be paid in seperate)wherever required as per the detail and direction of Engineer In-charge .Basic price of Laminate Rs 80/- per sqm, cost of corian 9,000/- per sqm. (Cable Manager to be provided)All internal surfaces to be finished with 0.8mm thick balancing laminate of approved shade.Cost to include Borer/Antitermite treatment for wood/plywood. Note - The rate shall be inclusive of CPU trolley of approved make, necessary fittings, fixtures, hardware such as channels, hinges, ball catches, automatic locking arrangament, wire managers etc including providing the necessary openings for electrical/computer wiring complete as per drawing or instructions of Engineer-In-charge. |
| 28 | MULTIPURPOSE COUNTERS (PRO, MSW etc,)Providing and fixing of multilevel Multipurpose linear counter of desired length, 1050 mm (H)as per drawing & detail. The counter at upper level and front panel / front facia/ modesty panel is formed of 19mm thick Marine Plywood and 12mm ply boxing(wherever required), 450mm extended front panel of 12 mm toughened glass with all patch fitings and opening as specified, Lower level counter formed out of19mm Marine ply finished with counter top of 12mm thick solid acrylic surface- corian of approved shade and finishas per details. Fixed Partition with 12 mm thick MDF board finished with 1.5 mm laminate of approved shade and pattern for variable height (600-900 mm) above extended front glass panel, supported with anodised aluminium frames of required size and thickness wherevere required. Provision of doorinstallation shall also be ensured, (Doors and Frame to be paid in seperate) as per the detail and direction of Engineer In-charge .Basic price of Laminate Rs 80/- per sqm, cost of corian 9,000/- per sqm. (Cable Manager to be provided) All internal surfaces to be finished with 0.8mm thick balancing laminate of approved shade.Cost to include Borer/Antitermite treatment for wood/plywood. Note - The rate shall be inclusive of CPU trolley of approved make, necessary fittings, fixtures, hardware such as channels, hinges, ball catches, automatic locking arrangament, wire managers etc including providing the necessary openings for electrical/computer wiring complete as per drawing or instructions of Engineer-In-charge. |
| 29 | MISC. MAIN HOSPITALWall paneling made from framework of 50 x 25 x 1.20 mm thick hollow aluminum sections spaced 450mm c/c both way (Intermediate), Claded with 8.0 mm thk. over which MDF fluted wooden panel of 10mm +/- 2mm shall be fixed as per the design in the drawing or as directed by Engineer In-charge. (i) Framework:- Made out of 50 mm x 25 mm x 1.2mm thick extruded Aluminium hollowsections,placednotexceeding450mm c/c both way (Intermediate) & as required in width of bands, centretocentre,bothways (horizontal and vertical), fixed rigidly on wall / columnns in perfect line, level and plumb & claded with 8.0mm thk. over which MDF fluted wooden panel of 10mm +/- 2mm shall be fixed. (ii)PanelFinishing:-Providing&fixing10mm+/-2mmthickapprovedMDF Wooden Panelling fixed on the aluminum sections claded with 8.0mm thk. with tongue and groove joints in line and level.(iii)Therateshouldincludecostofnecessaryhardware,makingcutouts/ openings for electrical conduits / cables, Switch boards, AC ducts etc., including providingnecessarywooden/aluminumsectionmemberssupportatcutouts, doors/windows openings etc. complete as per drawings and as directed by the Engineer-in-charge at site. iv) The Duco paint shall be of approved make and shade. The surface to be painted shall be first prepared smooth by applying proper grade of sand paper / water-paper and then if any pores are noticed the same shall be filled with approved quality synthetic filler agent. The complete surface shall be then applied an even coat of sealer putty and permitted to dry. The surface shall be again grinded smooth and even using appropriate grade of water-paper. When the surface is properly smooth and leveled without any pores or cracks the same shall be spray painted with approved quality Duco paint. The adjoining surfaces which are not to be painted with this application shall be suitably masked using appropriate masking tape. The paint shall be permitted to dry at room temperature and attain smooth lustrous finish.MDF Board:- Greenply, Century, Samrat orequivalent approved by the Bank. |
| 30 | Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : |
| 31 | Decorative veneer facings of approved manufacture |
| 32 | Melamine polishing on wood work (one or more coat). |
| 33 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats. |
| 34 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 35 | Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/rubbish to the nearest municipal dumping ground, all complete as per directions of Engineer-In-Charge. |
| 36 | For door/ window/ clerestory window. |
| 37 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
