fixing of rate contract for repairs to different types of damaged Horizontal and Vertical turbine pumps and motors installed at various WSSs of Jal Shakti (PHE) Mechanical Rural Division, Srinagar- 1 Earth work in excavation by manual means in trenches for foundations, drains,pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspitsand the like not exceeding 10 Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of excavated earth up to 1 m from cutting edge: 2 All kinds of soil : 3 Ordinary Rock 4 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains,pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspitsand the like not exceeding 10 Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal ofexcavated earth as directed, within a lead of 50 metres: 5 All kinds of soil : 6 Ordinary Rock 7 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge (Schedule item) 8 15 mm to 40 mm nominal bore. 9 Above 40 mm nominal bore 10 Cutting of B & C class GI /MS pipe by way of oxy-acetylene cutting process. Including cost of all required consumables and skilled worker with labour, etc. but excluding the cost of transportation charges of equipment to site. 11 50-100 mm Nominal Dia 12 125-200 mm Nominal Dia 13 Cutting of B & C class GI /MS pipe by way of using grinder Including cost necessary power arrangement, other consumables, skilled worker and labouretc. but excluding the cost of transportation charges of equipment to site. 14 50-100 mm Nominal Dia 15 125-200 mm Nominal Dia 16 Cutting of B & C class GI /MS pipe by way of using electric arc welding Including cost necessary power arrangement, other consumables, skilled worker andlabouretc. but excluding the cost of transportation charges of equipment to site. 17 50-100 mm Nominal Dia 18 125-200 mm Nominal Dia 19 Welding of B & C class GI /MS pipe by way of oxy-acetylene cutting process. Including cost of all required consumables and skilled worker with labour, etc. but excluding the cost of transportation charges of equipment to site. 20 50-100 mm Nominal Dia 21 125-200 mm Nominal Dia 22 Welding of B & C class GI /MS pipe by way of using electric arc welding Including cost necessary power arrangement, other consumables, skilled worker andlabouretc. but excluding the cost of transportation charges of equipment to site. 23 50-100 mm Nominal Dia 24 125-200 mm Nominal Dia 25 Hiring of portable diesel engine driven pump set with delivery of50-65 mm for dewatering around workspace of pipes i, etc. excluding fuel charges 26 Fuel and operational cost for 50-65 mm nominal dia delivery 27 Hiring of mobile crane upto 5 Ton capacity 28 FLANGESProviding and welding of steel plate flanges of nominal pressure rating 1.6MPa as per IS 6392 with nominal sizes as under: 29 32mm 30 40mm 31 50mm 32 65mm 33 80mm 34 100mm 35 125mm 36 150mm 37 200mm 38 250mm 39 300mm 40 350mm 41 Providing and welding of steel plate blind flanges as per IS 6392 of nominal pressure rating 1.6MPa with nominal sizes as under: 42 50mm 43 65mm 44 80mm 45 100mm 46 125mm 47 150mm 48 200mm 49 250mm 50 300mm 51 350mm 52 GASKETProviding of natural rubber gasket for flanged joints with nominal sizes as under: 53 32mm 54 40mm 55 50mm 56 65mm 57 80mm 58 100mm 59 125mm 60 150mm 61 200mm 62 250mm 63 300mm 64 350mm 65 Providing and shifting , stacking Medium Class G.I. pipes completeexcluding trenching and refilling etc. 66 15 mm dia. nominal bore 67 20 mm dia. nominal bore 68 25 mm dia. nominal bore 69 32 mm dia. nominal bore 70 40 mm dia. nominal bore 71 50 mm dia. nominal bore 72 65 mm dia. nominal bore 73 80 mm dia. nominal bore 74 100 mm dia. nominal bore 75 150 mm dia. nominal bore. 76 200 mm dia. nominal bore 77 Mechanical transport, loading, unloading, and handling of various items such as, welding DG set, oxyacetylene gas plant and all other tools and plants etc. using appropriate means of transport as under: 78 Private car, auto rickshaw or similar with 1.0 km lead 79 Extra per kilometre for lead>1.0 km upto 5.0 kms 80 Extra per kilometre for lead>5.0 kms upto 10.0 kms 81 Extra per kilometre for lead>10.0 kms upto 20.0 kms 82 Extra per kilometre for lead>20.0 kms upto 30.0 kms 83 Extra per kilometre for lead>30.0 kms upto 50.0 kms 84 Extra per kilometre for lead>50.0 kms upto 70.0 kms 85 FASTENERSProviding of high tensile steel hexagonal bolts 86 M6 x 50 87 M8 x 80 88 M10 x 80 89 M12 x 80 90 M14 x 90 91 M16 x 100 92 M18 x 50 93 M18 x 125 94 M18 x 150 95 M20 x 100 96 M22 x 90 97 M22 x 125 98 M22 x 150 99 M24 x 90 100 M24 x 100 101 M24 x 150 102 M27 x 120 103 M30 x 110 104 Providing of hexagonal nuts of suitable pitch with sizes as under: 105 M6 106 M8 107 M10 108 M12 109 M14 110 M16 111 M18 112 M20 113 M22 114 M24 115 M27 116 M30 117 Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 118 Providing and fitting of carbon steel Fasteners of assorted sizes 119 Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 120 15 mm and 20 mm dia. G.I. pipes 121 25 mm and 32 mm dia. G.I. pipes 122 40 mm and 50 mm dia. G.I. pipes 123 65 mm and 80 mm dia. G.I. pipes 124 100 mm and 150 mm dia. G.I. pipes 125 150mm to 200 mm dia G.I. pipes 126 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating etc deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. 127 Disinfecting of dismantled water under repairs mains by flushing with water containingbleaching powder @ 0.5 grms per liter of water and cleaning thesame with fresh water, operation to be repeated three times prior to refitting 128 80 mm diameter 129 100 mm diameter 130 125 mm diameter 131 150 mm diameter 132 200 mm diameter 133 250 mm diameter 134 300 mm diameter 135 350 mm diameter 136 Painting G.I. Pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality 137 15 mm diameter pipe. 138 20 mm diameter pipe. 139 25 mm diameter pipe. 140 32 mm diameter pipe. 141 40 mm diameter pipe. 142 50 mm diameter pipe 143 65 mm diameter pipe 144 80 mm diameter pipe 145 100 mm diameter pipe 146 125 mm diameter pipe 147 150 mm diameter pipe 148 200 mm diameter pipe 149 250 mm diameter pipe 150 300 mm diameter pipe 151 350 mm diameter pipe 152 PRESSURE GAUGEProviding and fitting of M.S pressure gauge as under: 153 50mm dial 154 100mm dial 155 150mm dial 156 200mm dial 157 Hiring charges of Skilled Mechanic (for Disassembling and Assembling of various itemsetc): 158 Hiring charges of Labourer for support of Mechanic 159 Removal from piping system and complete dismantling of various type of valves such as foot valves/ butterfly valves/ NRVs/ check valves/ sluice valves (without spur gear mechanism) by way of disassembling of parts, etc. 160 < 100mm nominal size 161 >=100mm upto 200mm nominal size 162 > 200mm upto 350mm nominal size 163 Assembling of all parts of dismantled valve, fitting in the piping system and testing. 164 < 100mm nominal size 165 >=100mm upto 200mm nominal size 166 > 200mm upto 350mm nominal size 167 Partial dismantling of various types of valves such as NRVs, sluice valves, butterfly valves, flap valves, etc. for repairs or replacement of parts such as hinge pin/ seat ring/ disc face/ hinge repairs, etc. and reassembling of all parts of dismantled valve and testing. 168 <100mm nominal size 169 >=100mm upto 200mm nominal size 170 >200mm upto 350mm nominal size 171 Fabrication, providing and fitting of SS/ alloy steel hinge pin for all types of valves, etc. as per old sample but excluding the cost of extracting the old pin and dismantling/ reassembling the valve, etc. 172 Fabrication & providing of new bronze body seat ring/ bronze wedge facing ring/ bronze stem nut/ float guide as per sample for various valves but excluding cost of dismantling the valve parts 173 upto 1.0 kg 174 Extra per kg >1.0 kg upto 2.5 Kgs 175 Extra per kg >2.5kgs upto 4.0 Kgs 176 Providing and fitting of rubber gasket for various types of valves 177 Providing of jute/ hemp gland packing 178 Fabrication & providing of new SS stem nut/ stem-spindle/ pinion/ pinion shaft/ stub shaft (AISI-410 or IS 6603) for sluice/ butterfly or other type of valve as per old sample 179 upto 20.0 kg 180 Extra per kg >20.0 kg upto 40 Kgs 181 Extra per kg >40kgs upto 60 Kgs 182 Providing & applying of grease 183 FOOT VALVEFabrication, providing and fitting of CI disc plate as per old sample 184 Providing of leather disc face washer for foot valve 185 Labour for fitting of washer to foot valve including removal of foot valve from suction line, extraction of old damaged washer, fitting of new (available) washer and refitting of foot valve to suction line. 186 Providing and fitting of screwed type GM foot valve conforming to IS-4038 of nominal size: 187 15mm 188 20mm 189 25mm 190 32mm 191 40mm 192 BALL VALVEProviding and fitting of ISI mark forged brass ball valve (Preferred make: Zoloto or equivalent) 193 10mm 194 15mm 195 20mm 196 25mm 197 32mm 198 40mm 199 Providing & fitting of palmative/gland packing
