|
| 1 | Excavation in foundation inOrdinarySoil including lift upto 1.5m and lead upto 30m requiring the use of special T&P such as Pick axe,Subbles etc. As per S.I. No. 251. |
| 2 | Earth workin cutting or in embankmentin ordinarysoil i/c lead up to 30m distance & lift up to 1.5 m. required for proper completion of the work but 2 km cartage extra. As per SI.No. 253 |
| 3 | Cement concrete with 4cm gauge brick ballast, fine sand and cement in the proportion of 12:6:1 in foundation and under floors including supply of all material labour and T&P etc required for the proper completion of the work.As per S.I. No. 273 |
| 4 | M-150 brick work in 1:4 cement and coarse sand of 1.25 F.M. in foundation and plinth i/c supply of all materials,labour and tools and plants etc required for proper completion of the work. As per SI No-305. b |
| 5 | 12 mm. Cement plaster in 1:4 with cement and f/sand mortar as per SI No. 584 |
| 6 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification clause 401. |
| 7 | Providing laying, spreading and compacting stone aggregates of specific sizes towater bound macadam specification including spreading in uniform thickness hand packing-rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber applying and broomingcrushable screening to fill-up the interstices of coarse aggregtate watering and compacting to the required density grading 3 as per Technical Specification clause 405. |
| 8 | Construction of unreinforced, dowel jointed at expansion and construction joints only, plain cement concrete pavement, thickness as per design, over a prepaired sub base, with 43 Grade cement or any other type as per clause 1501.2.2, M 30 (Grade), coarse and fine aggregates conforming to IS383, maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mixed design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film,wedges, steel plate, including levelling the formwork as per drawing), spreading the concrete with shovels, rakes,compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501. |
| 9 | Supply and fixing of granite sign board. |
