}
  • Home   ›
  •   Indian Tenders   › Tender Notice : 48726340

    • Tender For Appdcl-Sdstps-3X800mw- Supply Of Cast Basalt Lined Ms Pipes & Loose Flanges Required For Wet Ash System Of Ash Handling Plant, Stage -I/Sdstps At Nelatur(V), Muthukur(M), Spsr Nellore Dist., Nellore-Andhra Pradesh

    Andhra Pradesh Power Generation Corporation Limited has published Tender For Appdcl-Sdstps-3X800mw- Supply Of Cast Basalt Lined Ms Pipes & Loose Flanges Required For Wet Ash System Of Ash Handling Plant, Stage -I/Sdstps At Nelatur(V), Muthukur(M), Spsr Nellore Dist.. Submission Date for this Tender is 22-04-2025. MS Pipe Tenders in Nellore Andhra Pradesh. Bidders can get complete Tender details and download the document.




    Tender Notice

    48726340
    Tender For Appdcl-Sdstps-3X800mw- Supply Of Cast Basalt Lined Ms Pipes & Loose Flanges Required For Wet Ash System Of Ash Handling Plant, Stage -I/Sdstps At Nelatur(V), Muthukur(M), Spsr Nellore Dist.
    Open Tender
    Indian
    Andhra Pradesh
    Nellore
    22-04-2025

    Tender Details

    Tender For Appdcl-Sdstps-3X800mw- Supply Of Cast Basalt Lined Ms Pipes & Loose Flanges Required For Wet Ash System Of Ash Handling Plant, Stage -I/Sdstps At Nelatur(V), Muthukur(M), Spsr Nellore Dist. 100148104 MS flange of ID 376mm, OD 533.4mm and Thickness 33.4mm with 12nos holes of size 28.4mm dia. Equal span along the PCD of 476mm confirming to IS2062(As per enclosed drawing) NO 15.000 2 100172074 MS flange of ID 376mm, OD 482mm and Thickness 33.4mm with 12nos holes of size 25.4mm dia. Equal span along the PCD of 432mm confirming to IS2062(As per enclosed drawing) NO 25.000 3 100148100 Cast Basalt lined MS pipe of 5mm thickness, ID 303mm and OD 373mm, confirming to IS 2062.Length of the pipe 6m with painting as per attached drawing. Cast Basalt thickness: - 20+/-2mm,Density :- 2.8 -3.1 gm/cubic cm, Hardness :- 8 on mohs, Water absorption: - <0.5%, Compressive strength:- 4500Kg/Sq.cm, # Bending Strength :- Minimum 300 Kgf/Sq.cm, Abrasion Resistance:- Maximum 0.7 mm, Testing pressure:- 20 Kgf/Sq.cm, #Max. Workin gPressure:- 9.6 kgf/Sq.cm#Grout:- Mortar,#Grout Thickness: - 10mm thickness of cement mortor(1:2).# PAINT:-#A)Primer: Two coats of zinc phosphate epoxy.(DFT 75 micron) # B)Intermediate: One coat of 2 pack high build epoxy polyamide MIO (DFT-100 micron)# # C)Finish paint: One coat of chlorinated rubber paint.#DFT-50 micron#Shade- smoke grey# Note: - # 1. 120 meters pipe with double side - A type flanges. #(A-Flange details: - ID-376mm, OD-482mm and PCD-432mm.) # 2. 60 meters pipe with single side –A type flanges.# (A -Flange details: - ID-376mm, OD-482mm and PCD-432mm.)# 3. 60 meters pipe with double side - B type flanges.#(B-Flange details: - ID-376mm, OD-533.4mm and PCD-476mm.)

    Key Value

    Document Fees
    Refer document
    EMD
    Refer document
    Tender Value
    Refer document
    Disclaimer :
    We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
    Tell us about your Product / Services,
    We will Find Tenders for you
    Cnet Technologies

    We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.

    About Us

    Services

    Browse Tenders

    For Sales Inquiry

    Connect With Us

    Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

    For Tender Information Services Visit : TenderDetail