Tender For Plastic Proccessing Unit At Pinguli Tal.Kudal - Sub Estimate No.1- Plastic Collection And Processing Shed 2 Item No.1 :Excavationfor foundation/pipetrenchesin hard murum including removing theexcavatedmaterialupto adistanceof50M and liftsasbelow, stackingandspreading asdirectedbyEngineer-in-charge, normaldewatering, preparingthe bed for foundation and excluding backfilling, etc. complete. 3 Item No.2 : Providing Concrete and M-15/laying in of trap/ granite / quartzite gneiss metal for foundation bedding including bailing out water, for work, compaction, curing, etc. complete. 4 Item No. 3:Providing uncoursed rubblemasonryof trap / granite / quartzite / gneiss stonesincementmortar1:5inbasement sincluding scaffolding,bailingoutwatermanually, rackingoutjointswhenplasteringistobedonestrikingjointswherenopointingorplasteringisto be done and watering etc.complete. 5 Item No.4 : Filling in plinth and floors with approved excavatedmaterial in 15cm. to 20cm. Layers including watering and compacting etc. complete. 6 Item No.5 :Providing laterite stone masonary in Superstructure mortar 1:6 in foundation and plinthincluding striking joints on the unexposed faces and watering complete. 7 Item No.6 :Providing structural steel work in single stanchions composed of R.S.J. Channel etc. withcaps, bases, mild steel plated, angle brackets, cleats, gusset plates, anchor bolts etc. as per detailed designs and drawings or as directed including cutting,fabrication, hoisting, erecting fixing in position, making riveted/ bolted/ welded connection and onecoat of anticorrosivepaint andover it two. coatsof oil painting approved quality and shade etc. complete. 8 Item No.7 : Providing and fixing crimped with G.I.mesh and size20mmx20mm10 guage to iron angle frame including welding crimp mesh to angle frame and steel flat, fixing the frame in its original position and oi lpainting etc. complete 9 Item No.8: Providing and fixing plain zinc sheeting of 0.80mm thick(22B.W.G.)overtheridgehip orvalleytogalvanizedironsheet roofingincludingall fasteningandboltgalvanisediron screws and bolts, lead and bitumen washers etc. complete. 10 Item No.9 :ProvidingandfixingM.S.gate2.5M wide for compound with 40mm diaG.I. pipe, approved grill work,RCCM 150side pillars of 25cmx40cmx2.5Mheight, its foundation, finishing, painting, etc.complete. 11 Item No.10 : Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 usingwaterproofingcompoundat1Kilogrampercementbagcuringthesamefornot lessthan2 days andkeeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mmthick incementmortar 1:4 finishing the surface by taking out grainsandcuringforfourteendays scaffolding etc.complete. 12 Item No.11 :Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of requiredwidth inplain/diamond pattern on abedof1:6C.M. includingcement float, striking joints, pointing in cement mortar 1:3 curing and cleaningetc. complete. 13 Item No.12 : Providing and applying white-wash non e coat on old/new plastered or masonry surfaces and asbestos cement sheets includingscaffoldingandpreparingthesurfacebybrushing and brooming downetc. complete. 14 Item No.13 : Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding,preparingthesurface, applying the acrylicwall putti etc. complete. 15 Sub Estimate No.2 - Compound Wall 16 Item No.1 :Excavationfor foundation/pipetrenchesin hard murum including removing theexcavatedmaterialupto adistanceof50M and liftsasbelow, stackingandspreading asdirectedbyEngineer-in-charge, normaldewatering, preparing the bed for foundation and excluding backfilling, etc. complete. 17 ITEM NO: 2Filling inplinthand floors / trencheswith contractors murum for bedding in15cm to 20 cm layers includingwatering and compaction,etc.complete. 18 ITEM NO: 3 : Providing Concrete and M-15/laying in of trap granite / quartzite gneiss metal for foundation bedding including bailing out water, form work, compaction, curing, etc. complete. 19 ITEM NO: 4 : Providing and Concrete laying in of trap/ granite / quartzite / gneiss metal for RCC foundation foundation columns like and raft, grillage, footing and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. 20 ITEM NO: 5 : Providing and Concrete casting in of trap/ granite / quartzite / gneiss metal of approved quality for works Rate(Rs.)2023-24 Rate(Rs.)2024-25 Complete Labour Complete Labour situ situ Cement and Cement work of in strip RCC Cum Cum 5478 5881 1660 1640 Cum Cum Cum Cum situ Cement RCC as per detailed drawings and designs or as directed by Engineerin charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. 21 ITEM NO: 6 : Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. 22 ITEM NO: 7 : Providing and fixing in position steel reinforcement bar of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. 23 Item No.8 :Providing laterite stone masonary in Superstructure mortar 1:6 in foundation and plinthincluding striking joints on the unexposed faces and watering complete. 24 Item No.9 : Providing sand faced plaster externally incement mortar using approved screenedsand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofingcompoundat1Kilogrampercementbagcuringthesamefornot lessthan2 days andkeeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mmthick incementmortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete 25 Item No.10 : Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding,preparingthesurface, applying the acrylicwall putti etc. complete. 26 Item No.11 : Providing and applying white-wash non e coat on old/new plastered or masonry surfaces and asbestos cement sheets includingscaffoldingandpreparingthesurfacebybrushing and brooming downetc. complete. 27 ITEM NO: 12 :Providing And Fixing M.S. 2.5 Wide For Compound With 40mm G.I Pipe,approved Grill Work,RCC M150 Side Pillars Of 25cm x 40cm x 2.5 M heights, its foundation finishing, painting etc complete. 28 ITEM NO: 13 :Providing And Fixing Wicket Gate 1 M Wide For Compound With 40mm G.I Pipe,approved Grill Work,RCC M150 Side Pillars Of 25cm x 40cm x 2.5 M heights, its foundation finishing, painting etc complete. 29 Sub Estimate No.3 - Plastic Baling Machine 30 ITEM NO: 1 :Providing, Installing and Commissioning Hand Lever Operated Vetical Type baling machine for pressing/Compressing Product Like Plastic Bottles, aluminium cans, disposable plastic items etc.7.5 HP Motor drive the capacity of plastic baling machine is 25 Tones,having chamber size 700mm x 500mm x 1400 mm, bale size 700 mm x 600 mm x 650mm and overall dimension 1000mm x 1000mm x 4000mm with the electrical control system. the weight of bale is 50-60kgand overall weight off machine is 700 kg 31 Sub Estimate No.4 - Plastic Dust Remover Machine 32 ITEM NO: 1 :Supplying 15 HP Dust Remover machine with following particulars.1.Dimensions - 2550 x 1200 x 1350(mm)2.Drum Dai -915 mmPerforatedcasing 3.Perforated Cover Thickness - 16mm Round Rod 4.Drum Length - 2100mm5.Drum Cover Dia. - 6200mm 6.Machine Output - 120-150kg/hours7.Rotorrod - 8 nos8.Working Area - 500-700sq. feet 9.Heavy Frame Structure 33 Sub Estimate No.5 - Plastic ShreddingMachine 34 Providing Installing And Commissioning Single Shaft Shredder For MUNCIPLE solid Waste Containing Various Objects Such As Plastic Bottles, Plastic Waste,Trash Waste, Organic Waste,etc. Having 3 tonnes Capacity Of Shredder taking 8hr per day Operation with anual hopper loading having lectric drive for shredder with mannual hooper loading having electric drive for shredder with Cylendrical Solid Outer With blades fitted rotary shaft. the material of housing is made up of mild steel cutter blade mounted on rotary shaft is made up of hardened alloye steel material with 7.5 HP motor power 3 phase input electric supply, manual based control pannel,100 litres capacity of waste bin sand 1 year warranty on machine.
