|
| 1 | NOTE FOR PLUMBING AND SANITARY ITEMS:-(i) Contractor shall deposit entire quantity of plumbing and sanitary wares materialsrequired / covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis.(iii) make specified in BOQ will supersede to all. |
| 2 | Dismantling of floor hearth or wall tiling includingbedding (but not backing) removing serviceable tiles in store rubbish of the premises complete all as specified and as directed. |
| 3 | Material and labour for double/ultracharged vitrified tiles 8-9 mm thick light shade, (square/rectangular) polished, area of each tiles not exceeding 0.64 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 4 | Description all as per item no 03 above but as in vertical surface like skirting/dado including 10 mm thick cement plaster (1:4) as backing coatcomplete all as specified and as directed. |
| 5 | Material and labour for 25 mm thickCement concrete in level course for receiving floor tiles using Type B1,1:2:4 (20 mm graded aggregate) complete all as specified and as directed. |
| 6 | Material and labour forNon - skidcoloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of eachtile exceeding .06 sqm but not exceeding 0.12 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 7 | Material and labour forNon - skidcoloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of eachtile exceeding .11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in cement mortar (1:6)complete all as specified and as directed. |
| 8 | Description all as per item no.07 above but as in skirting/daddo over, including 10mm thick plaster in CM(1:4) complete all as specified and as directed by Engr-in-charge. |
| 9 | Material and labour for Glazed ceramic colouredtiles in vertical surface 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coatcomplete all as specified and as directed |
| 10 | Material and labour for preparation of old plasterd or unplastered surfaces of wall and applying two coat of cement base paintcomplete all as specified and as directed. |
| 11 | Material and labour for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of oil bound distemper complete all as specified and directed |
| 12 | Material and labour for wall care putty of 2 mm thick as in interior / exterior on wall / ceilingsurfaces of any descriptionfinished smooth and even surfaces (mastercoat finish) complete all as specified and as directed. |
| 13 | Supply and fix vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as per makes specified in PS fixed as in repairs,complete all as specified and as directed. |
| 14 | Supply and fix plastic water closet seat cover, coloured, for pedestal pan closed pattern with flat bottom,and cover with mild steel chromimium plated or aluminised hinging device complete fixed in repairs complete all as specified and as directed. |
| 15 | Supply and fix Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) \"P\" or \"S\"trap connecting to flush pipe and to anti syphonage pipe, complete including making good to floor fixed in repairs complete all as specified and directed. |
| 16 | Supply and fix PVC valveless, syphonic action type, flushing cistern, 10ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, makes specified in PS fixed in repairs complete all as specified and as directed. |
| 17 | Supply and fix in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed. |
| 18 | Supply and fix in repairangle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down , screwed both end for iron pipe or or brass ferrulefor 15 mm bpre of pipe complete all as specified and as directed. |
| 19 | Supply and fix Vitreous china wash basin white flat back size 550x400 mm excluding taps but including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets all as per makes specified in PS complete fixed in repairs all as specified and directed. |
| 20 | Supply and fix 15 mm bore Pillar taps, cast copper alloy fancy type,chromium plated, screwed down high pressure, with or without lettered `Hot\" or `Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe all as per makes specified in PS fixed in repairs complete all as specified and as directed. |
| 21 | Supply and fix in repairs PVC connections 15 mm size with PTMT nut of length 450 mmfixed in all as directed. |
| 22 | Supply and fix in repairs PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm & 40 mm dia 600 mm longfixed complete all as specified and as directed. |
| 23 | Supply and fix in repairs PVC (SWR) gully trap 125/110mm setting and jointing in solvent cement complete all as specified and as directed. |
| 24 | Supply and fix in repairs PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 25 | Supply and fixfancy type (in repairs) Stop cock (Concealed)cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cupfor 15 mm bpre of pipe complete all as specified and as directed.MAKE :- Cera/prayag |
| 26 | Supply and fix in repair two way angle cock with flange cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrulefor 15 mm bore of pipe complete all as specified and as directed. |
| 27 | Supply and fix in repair Sink mixer (wall mounted) with 165mm(6.5\"\") long swivel spout,connecting legs and wall flanges complete all as specified and as directed. |
| 28 | Supply and fix in repairfor Vitreous China bowl urinal flate backsize 330x250x445 mm wall mounted(minimum), (excluding flushing cistern, flush pipe and waste pipe) including fitting of push cock with exting GI Tubing fixed in repairs all as per PS complete all as specified and as directed. |
| 29 | Supply and fix in repair CP Waste coupling for vitreous china bowl urinal flate back complete all as specified and as directed. |
| 30 | Material and labour for urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) fixed in repairs complete all as specified and directed. |
| 31 | Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide (wall) with chromium plated bracket guard and with CP aluminium railing complete all as directed by Engr-in-Charge. |
| 32 | Supply and fix in repair towel ring brass body glossy finish chromium plated make all as in PS complete all as specified and as directed. |
| 33 | Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe incl bedding in cement mortor to dwarf wall ot cantilever brackets and connecting union to waste pipe upto 0.5sqm each overall size 915x460mm, bowl size 410x330x160mm complete all as specified and as directed. |
| 34 | Supply and fix sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 35 | Material and labour in repair Stainless steel plate rack of size 900 x 700mm, including provision for storage of plates and boxes fixed to wall complete all as specified and as directed. |
| 36 | Demolition of precast concrete block walling built in cement mortar including PCC coping and for ashlar facings,dressed stonework,precast concrete articles and precast concrete block walling complete all as specified and as directed. |
| 37 | Taking down cement plaster on wall /concrete surface etc including racking out joints hacking for key scrubing down with water etc all as specified and directed. |
| 38 | Material and labour forPrecast cement concrete block masonry using type C5 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar1:6complete all as specified and as directed. |
| 39 | Description all as per item no 38 above but except block |
| 40 | Material and labour for rendering 15 mm thick on faces of brick/ PCC block masonry wall using cement plaster 1:4 and rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 41 | Material and labour rendering 5 mm thick in CM 1:3 on concrete surface of ceiling & finished even & smooth without using extra cement complete all as specified and as directed. |
| 42 | Material and labour for rendering 10 mm thick on fair faces brick work /PCC block masonaryor concrete surface of wallusing cement plaster 1:6 and finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 43 | Material and labour preparation of newly plastered surface and applying two coat of cement base paint over one coat of alkali resistance primer complete all as specified and directed. |
| 44 | Material and labour preparation of newly plastered surface and applying two coat of oil bound Distemper over a coat of primer on walletc complete all as specified and directed. |
| 45 | Material and labour for preparation of new plastered surface of Ceiling and applying three coats ofwhite wash including preparity to plastered surface complete all as specified and directed. |
| 46 | Supply and fix in repairs bib taps 15mm dia, cast copper alloy chromium plated,with CP flange all as per specified in PS fixed in repairs complete all as specified and as directed. |
| 47 | Supply and fix in repairs bib taps 15mm dia, cast copper alloy chromium plated, long body,with CP flange all as per makes specified in PS fixed in repairs complete all as specified and as directed. |
| 48 | Supply and fix in repair towel rail 600 mm long offixed with and including chromium plated brass screw and wooden / plastics cleats complete all as specified and directed. |
| 49 | Supply and fix in repairs soap dish, any type, fixed to plugs with chromium plated brass screws fixed in repair complete all as specified and directed. |
| 50 | Supply and fix 75mm bore PVC(SWR) pipe,type \"B\" single socketed in any length with rubber ring joints laid in trenches or floors fixed in repairs all as specified and as directed. |
| 51 | Supply and fix 110 mm bore PVC (SWR) pipes, type \"B\" single socketed in any length with rubber ring joints fixed to wall including PVC clamps and necessary fittings fixed in repairs complete all as specified and as directed. |
| 52 | Supply and fix PVC (SWR) bends type \"B\"of any radius, 75 mm dia complete all as specified and directed. |
| 53 | Supply and fix PVC (SWR) bends type \"B\"of any radius, 110 mm dia complete all as specified and directed. |
| 54 | Supply and fix 75 mm bore PVC (SWR) branch piece (single Y), type \"B\"equal or unequal with access door complete all as specified and as directed. |
| 55 | Supply and fix 110 mm bore PVC (SWR) branch piece (single Y), type \"B\"equal or unequal with access door complete all as specified and as directed. |
| 56 | Supply and fix 110mm bore PVC (SWR) WC connector type \"B\"any type fixed in repairs complete all as specified and as directed. |
| 57 | Taking down steel tubing and connection 15mm bore. Including cleaning for refixing or removal to store all as specified and as directed. |
| 58 | Description all as item No 57 above but for 20mm bore. |
| 59 | Material and labour for refixing 15 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as directed. |
| 60 | Material and labour for refixing 20 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as directed. |
| 61 | Supply and fix tubes 15mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed. |
| 62 | Supply and fix tubes 20 mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed. |
| 63 | Demolition of stone slabs/flooringof any description laid bedded and pointed any mortar and all as specified and as directed. |
| 64 | Material and labour for Granite slab/pillar/window sill & jamp,machine cut for 20 mm thick bedded and jointed with colour cement to matchcut to shape including grinding and polishing required all as specified and directed. |
| 65 | Material and labour for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and as directed. |
| 66 | Description all as per ser No 65above but on step riser/skirting/vertical over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed. |
| 67 | Material and labour for Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 68 | Description all as per ser No 67 above but on step riser skirting over and including 10mm thick rendering in CM (1:4)all as specified and as directed. |
| 69 | Dismantling ofwall and ceiling boards (fibre,pulp insulation, Ac etc), any thickness including cover fillets complete all as specified and as directed. |
| 70 | Supply and fix interlocking aluminium alloy anodised snap grid consists of main Tee runners of size 38mm x25mm x1.5mm spaced 1200mm centre to centre and cross Tee of size 25mmx25mmx 1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mmx600mm and provide a secondary cross tee 25mm x1.4mm ( of length 600mm)to be interlocked of the centre of 1200mmx600mm panel to form a grid of 605mmx605mm and wall angle 25mmx25mmx 2mm. Aluminium alloy extruded section shall be aluminium anodised (minimum 15 micron ) and shall conform to IS 733, IS 1285 and IS 737. including Hangers of GI wire 6mm dia to be fixed by approved rawl plug, level and justers and screws etc complete all as specified and as directed. |
| 71 | Material and labour for 8-9 mm thick Gypsum board/tiles for insulation and accoustic purposes, 60cmx60cm in size , fixed with nails to timber frame work or with staples on snap grid in ceiling all as specified and as directed. |
| 72 | Taking down Chowkats or frames with shutters without taking of shutters from the frames exc 1.5 Sqm but not exc 4 Sqm each including all as specified and directed |
| 73 | Taking down Chowkats or frames with shutters without taking of shutters from the frames not.exc 1.5 Sqm each complete all as specified and as directed. |
| 74 | Taking down shutter exc. 1.00 Sqm but n.exc. 2.00 Sqm each and removing from site complete all as specified and as directed |
| 75 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification complete all as specified and as directed. |
| 76 | Supply and fix for 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock25mmthick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as specified and as directed.NOTE :- It also include Door handle, tower bolt, Hinges, sliding door bolt and other items required for Door connection |
| 77 | Supply and fix for powder coated aluminium sliding windows having three Nos of tracks including one wire glazed shuttersfor mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperature1.4 mmand two Nos glass shutters including 4mm thick coloured glass and aluminium section weight n.less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall complete all as specified and as directed.NOTE :- Colour of powder coating should be brown/wood grain in colour. |
| 78 | Supply and fix for powder coated anodised aluminiumventilator shutters, fixed type without sash bar including stainless steel wire cloth of 0.63 mm nominal dia and average aperature1.4 mm, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.and fixed to stone masonry wallincludingdemolition of RCC jali ventilators complete all as specified and as directed. |
