|
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared, including supply of all materials, labour, tools & plants etc complete as directed. |
| 2 | Repair works to cracks in plastering / masonary / R.C.C. works/ lintels/ beams/ chajjas etc. cutting out cracks to \"V\" section , cleaning, wetting, grouting& plastering to the cracks in the masonry wall with C.M. 1:3 (One cement and three fine river sand) after preparing the cracks, finishing, curing, scaffolding including supply of all materials, labour, tools & plants etc. complete. |
| 3 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineer in charge.With cement mortar 1:4 (1 cement : 4 fine sand) including supply of all materials, labour, tools & plants etc. complete. |
| 4 | 12 mm thick cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including cost of all materials, labours, tools & plants, scaffolding etc. complete as directed. |
| 5 | Painting with two coat of Synthetic enamel paint (Asian / Berger) of approved quality and color( Black & White ) to exterior of tower after, cleaning all dirt, dust, sand papering, wherever directed , including cost of all , labour, tools, scaffoldingetc. complete. |
| 6 | Painting two coat of Synthetic enamel paint (Asian / Berger) of approved quality and color to interior of tower after, cleaning all dirt, dust, sand papering, wherever directed , including cost of all , labour, tools, scaffoldingetc. complete. |
| 7 | Wall painting two coat with Exterior Emulsion paint of approved brand and manufacture after removing the old waterproof cement surfaceto give an even shade ,including throughly steel brushing the surface cleaning of all dirt,grease ,loose pieces of scales and sand paperedsmooth including necessary repairs to scratches ,applying a coat of primer and supply of all labours,materials ,tools & plants ,scaffolding etc complete as directed. |
| 8 | Painting two or more coats of floor enamel paint of approved brand and manufacture of required colour to give an even shade after, cleaning all dirt, dust, sand papering, wherever directed , including cost of all , labour, tools, etc. complete |
| 9 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work supply of all labours,materials ,tools & plants ,scaffolding etc complete as directed. |
| 10 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.- Upto 5mm depth and 5 mm width. |
| 11 | Replacing broken glass panes with 4mm thick pinhead glaqss panes with wooden fillets where ever necessaryafter removing the old damade glass etc complete as directed including cost of all materials, labour, tools & plants ,scaffolding . |
| 12 | Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete as directed including cost of all materials, labour, tools & plants etc complete as directed .- 100x70x4 mm (ordinary type). |
| 13 | Providing and fixing 300x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete as directed including cost of all materials, labour, tools & plants. |
| 14 | Providing and fixing 100mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as directed including cost of all materials, labour, tools & plants. |
| 15 | Providing and fixing100x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as directed including cost of all materials, labour, tools & plants. |
| 16 | Providing and fixing aluminium casement stays, ISI marked, anodised(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete as directed including cost of all materials, labour, tools & plants. |
| 17 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame complete as per manufacturer’s specification etc complete as directed including removing old frame, cost of all materials, labour, tools & plants. |
| 18 | Providing and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, etc complete as directed including cost of all materials, labour, tools & plants. |
| 19 | Providing and fixing Lighthouse display board of size 2.00x1.20m, of 25mm GI square tube allround frame work with an intermediate section of 1.20m length, 2 vertical legs of 50mm C Class GI pipe - 3.90m total height,stay pipe of 50 mm C Class GI pipe of 1.9 mtr length on both legs and base to be made up with ACP sheet over which matter to be printed in trilingual on vinyl sheet of superior quality and to be pasted on board, board to be fitted at suitable place with necessary cement concrete, excavation for foundation and painting two coat of epoxy paint above a coat of epoxy primer, as directed including cost of all materials, labour, tools & plants and transportation charges, scaffolding etc complete. |
| 20 | Providing and fixing Lighthouse direction board of size 0.90 x 0.50m, made out of ISA 50x50x5mm allround frame work, vertical leg of 50mm GI pipe - 2.30m total height, base to be made up with Aluminium sheet of 18 gauge over which matter to be printed in trilingual on vinyl sheet of superior quality and to be pasted on board, board to be fitted at suitable place with necessary cement concrete, excavation for foundation and painting two coat of epoxy paint above a coat of epoxy primer, as directed including cost of all materials, labour, tools & plants and transportation charges, scaffolding etc complete. |
| 21 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead, including cost of all materials, labour, tools & plants etc complete. |
| 22 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge including cost of all materials, labour, tools & plants etc complete. |
| 23 | Fabricating and fixing cast iron gate of size 3.60 m X 1.80 m fabricated out of 50 mm square bars and 25 mm dia intermediate spherical rods at 150mm c/c as per drawing.Painting the exposed surface with synthetic enamel paint two coat over a coat of zinc chromate primer including cost of all materials, labour etc complete as directed. |
| 24 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of all materials, labour etc complete as directed. |
| 25 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge including of all materials, labour, tools & plants,scaffoldingetc., complete . |
| 26 | Greasing the tower foundation bolt and nuts with grease after cleaning and removal of rust, dust etc and covering with tarpauline including cost of all materials, labour etc complete as directed. |
| 27 | Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. including cost of all materials, labour, tools and plants etc complete. |
| 28 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) including of all materials, labour, tools & plants,scaffoldingetc., complete . |
| 29 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 30 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.- All kinds of soil including cost of all materials, labour, tools & plants,scaffoldingetc., complete . |
| 31 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) including cost of all materials, labour, tools & plants,scaffoldingetc., complete . |
| 32 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. - 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern, including cost of all materials, labour, tools & plants etc complete. |
| 33 | Hire charges of mechanized boat 30 / 35 feet from Minicoy Jetty to anchorage point of ship & return for the transportation of men & materials, embarkation & disembarkation of dept officials from ship for the work including cost of all labour, fuel charges etc complete. |
| 34 | Recovery of Scrap value for old dismantled/ removed steel work (old main gate) |
