|
| 1 | SUPPLY OF CANNING LINE 0.5 TPH |
| 2 | Exhaust Box It consists off – SS 304-The tunnel type steam exhauster suitable for exhausting of cans-Pursed inside the trough to heat the can up to required temperature SS 304 wire mesh type belt-Conveyor belt width – 500mm-Conveyor frame is made in SS304 square pipe 40mm x 40mm-Top and bottom cover is provided and length of exhauster – 5500mm-One steam header with inlet and drain connection is provided-Temperature indicators with control and temperature sensor is provided-Variable frequency drive (VFD) is provided for control the speed of belt-Geared motor is provided – 2 HP-Body in 2mm thickness-Gear box and motor mounting plate – 5mm-Belt guides -30mm x 5mm |
| 3 | Vertical Tank Retorts – -Vessel Size -600mm diameter x 900mmH-Door – manually top opening-Capacity – 200 bottles-Basket – loading and unloading manually-Size of Bottle – 46mmx46mmx210mm-Automatic digital temperature controller system and pressure control-Provide safety valve, air vent valve, pressure gauge and digital temperate gauge-Connections – water inlet, drain |
| 4 | Round Retort Baskets-MS round crates-Diameter -500mm x 400mm |
| 5 | Tilting Kettle Steam Jacketed Kettle (Tilting Type)-500 Lit Equipment Consists Of:-Ss 304 Cylindrical Body with Bottom Hemispherical Portion-The Bottom Hemispherical Portion Will Have Ss Jacket for Steam Heating-Ss Supporting Legs with Mounting Pad-Steam Inlet, Outlet with Steam Trap, Safety Valve, Air Vent& Drain Connections-Water Holding Capacity – 500 Lits-Steam Requirement – 100 Kg Per Batch At 3 Kg/Cm2-Manually Tilting Arrangement by Hand Wheel |
| 6 | Media Preparation Kettle- 500 Lit -SS 304 cylindrical body with bottom hemispherical portion-The bottom hemispherical portion will have SS jacket for steam heating-SS supporting legs with mounting pad-Stirrer arrangement with PTFE scrapers, shaft & supporting tripod-Fixed speed drive for stirrer shaft-Steam inlet, outlet & drain connections-Holding capacity – 500 lits-Electric power requirement = 02 HP for stirrer shaft-Steam requirement – 100 kg per batch at 3 kg/cm2-Body in 5mm thickness |
| 7 | SS Tables -SS 304 table top and size – 2500mmx600mm x 800mm height-Four legs are provided in square tubes and 30x30mm-Can size cut out Body in 1.5mm |
| 8 | DS 24 Seamer -Capacity 30-40 High Speed cans per minute.-Can still type Seamer Suitable for seaming cans between 100 - 700 dia range.-Sturdily built & very robust construction.-Complete body of graded cast iron.-Seaming operation is fully automatic after the can is placed & pedal is pushed.-The can is stationary while the seaming head with roller rotates, thus seaming the can hermetically.-Change parts comprising of Seaming Rollers, Can Slide Can -Guide and Seaming Chucks for – To suit your 401 CHANGEPARTS [ 850 gm]-Electicals:2 HP 930 RPM motor, Switchgear, Starter, (Suitable for operation of 400 V 5% 3 phase 50 cycles supply) Pulley, V-belt, Cables, Conduits and fittings Toolkit |
| 9 | Gantry From Retort to Cooling Tank - MS structure |
| 10 | Hoist Lifting Crane -500kg Double wire rope typeCap- 500kgPower-1HP |
| 11 | Hoist Trolly -Trolley cap-500kg-Trolley with track for movement |
| 12 | Hydraulic Trolly-Pallet Material movement hydraulic trolley |
| 13 | Steam Line with All Valves with Aluminum Cladding -Steam pipeline 40mm and 25mm-Valves, bend, flange etc-Aluminum cladding |
| 14 | Can Sterilizer -The tunnel type steam sterilizer suitable for sterilizing of cans-All the bottom of trough one steam connection is provided the steam is directly-Pursed inside the trough to heat the can up to required temperature-Ss wire type belt is provided for carrying can and width-300 mm-Conveyor frame is made in ss square pipe-Top and bottom cover is provided and length- 10 feet-One steam header with inlet and drain connection is provided Wire mesh opening 5 mm and diameter- 1.6mm, Temperature indicates and temperature sensor is provided, Geared motor-01 HP |
| 15 | Hand Can Tester -Can testing tools |
| 16 | Drainer 1300 Kg -MOC -SS 304Size – 1000mmx1300mmx1000mm-With four legs Drain valve connection |
| 17 | Drainer 500 Kg ● MOC -SS 304● Size – 500mmx600mmx1000mm● With four legs● Drain valve connection |
| 18 | Hygiene Station ● MOC-SS 304● Two sink arrangement Foot operated |
| 19 | Hand Dryer- Hand dryer standard |
| 20 | Incubator- Natural convection lab incubator provides a temperature-controlled environment to support growth of microbiological cultures via natural convection design to minimize disturbance to the samples.This type of incubator can reach up to 80°C from the ambient (+7.5°C) temperature |
| 21 | Blanching Kettle- 500 Lit ● SS 304 cylindrical body with bottom hemispherical portion● The bottom hemispherical portion will have SS jacket for steam heating● SS supporting legs with mounting pad● Stirrer arrangement with PTFE scrapers, shaft & supporting tripod● Fixed speed drive for stirrer shaft● Steam inlet, outlet & drain connections● Holding capacity – 500 lits● Electric power requirement = 02 HP for stirrer shaft● Steam requirement – 100 kg per batch at 3 kg/cm2● Body in 5mm thickness etc. |
| 22 | Electrical Control Panel Suitable for above motorsThe panel consists of:Contactors, relay, push buttons etc.MS powder coated panel with stand |
| 23 | Installation, Commissioning & Testing Charges |
