|
| 1 | Fishing of Submersible motor from the deep borewell using special type hydrolic rig / fising tools and equipments by testing with wired camera inside the borewell including cost and labour for assembling the equipmets, transportation, hard labours, fuel and all other charges etc., complete (Vide Quatation) Above 5.00 HP to 10.00HP |
| 2 | Removing of Centrifugal Pumpset/Jet pumps/Submersible pumpsets and its accessories from Openwell / Borewell for attending repairs 50% of the rates mentioned under item 17(a), (b) and(c ) may be allowed fot the respective Horse power Up to 5.00 HP |
| 3 | Above 5.00 HP to 10.00 HP |
| 4 | Supplying and replacing of Thrust bearing set made of in one segment made from SS 304 grade and plate made from GIgh grade teflon having GIgh head resisting capacity suitable for submersible motor including cost and replacing charges etc complete as per specification 2 hp submersible motor |
| 5 | 5 hp submersible motor |
| 6 | 7.5 hp submersible motor |
| 7 | 10 hp submersible motor |
| 8 | Rewinding the burnt out coil to the following vertical type submersible motor with suitable insulated submersible copper induction wire and count including cost of coil wire and 30 days trail run (the retrived burnt out coil should be taken back by contractor) 2 hp submersible motor |
| 9 | 5 hp submersible motor |
| 10 | 7.5 hp submersible motor |
| 11 | 10 hp submersible motor |
| 12 | Supplying and replacing of bush assemmbly made ofLeaded tin bronze / 4.suitable for submersible motor including cost and replacing charges etc complete as per std specification 2 hp submersible motor |
| 13 | 5 hp submersible motor |
| 14 | 7.5 hp submersible motor |
| 15 | 10 hp submersible motor |
| 16 | Supplying and replacing of upper or lower housing assembly made of Cast ironfor submersible motor including cost and replacing charges etc complete as per std specification 2 hp submersible motor |
| 17 | 5 hp submersible motor |
| 18 | 7.5 to 10hp submersible motor |
| 19 | Supplying and replacing of STURD RINGS made in for submersible motor including cost and replacing charges etc complete2 hp submersible motor |
| 20 | 5 hp submersible motor |
| 21 | 7.5 to 10 hp submersible motor |
| 22 | Supplying and replacing of stainless steel bolt with nut of size 125 mm length and 10 mm dia both side threadedfor submersible motor including cost and replacing charges etc complete as per std specification 2 hp submersible motor |
| 23 | 5 to 10hp submersible motor |
| 24 | Supplying and replacing of motor rotary made of stainless steel to BS 970 :part 1 grade 431 s29 suitablefor submersible motor including cost and replacing charges etc complete as per std specification 2 hp submersible motor |
| 25 | 5 hp submersible motor |
| 26 | 7.5 hp submersible motor |
| 27 | 10 hp submersible motor |
| 28 | Supplying and replacing of stainless steel coupling for connect the motor shaft with pump shaft of 40 mm outer dia and 80 mm length suitable for submersible motor including cost and replacing charges etc complete as per std specification 2 hp submersible motor |
| 29 | 5 hp submersible motor |
| 30 | 7.5 hp submersible motor |
| 31 | 10 hp submersible motor |
| 32 | Supplying and replacing of pump shaft of 24 mm dia made of stainless steel to BS 970 :part 1 grade 431 s29 suitablefor submersible motor including cost and replacing charges etc complete as per std specification |
| 33 | 5 hp submersible motor |
| 34 | 7.5 hp submersible motor |
| 35 | 10 hp submersible motor |
| 36 | Supplying and replacing of impellarmade of stainless steel to BS 3100grade 316 c16 with rubber whorings ,stainless steel bush unit suitablefor submersible motor pumpset including cost and replacing charges etc complete as per std specification 2 hp submersible motor |
| 37 | 5 hp submersible motor |
| 38 | 7.5 hp submersible motor |
| 39 | 10 hp submersible motor |
| 40 | Supplying and replacing of impeller bodyof size 130mm outer dia and 35 mm height made in GIgh quality grey cast iron to BS EN 1561 Desiganation EN-JL 10410 of better suitablefor submersible motor pumpset including cost and replacing charges etc comp 2 hp submersible motor |
| 41 | 5 to 10 hp submersible motor |
| 42 | Supplying and replacing of guide rails of size 20 mm x 6 mm flats made of stainless steel to BS 970 : part 1 grade 316 suitablefor submersible motor pumpset including cost and replacing charges etc complete as per std specification 5 hp submersible motor |
| 43 | 7.5 hp submersible motor |
| 44 | 10 hp submersible motor |
| 45 | Supllying and replacing the stain less steel impellar wth necessary accessories for open well horizondal type submercible motor pumpset including cost and replacing labour charges 5 hp motor |
| 46 | 7.5 hp motor |
| 47 | Rewinding the burnt out coil to the following open well motor with suitablecopper induction wire and count including cost of coil wire and 30 days trail run (the retrived burnt out coil should be taken back by contractor)etc complete as per std spn5 hp motor |
| 48 | 7.5 hp motor |
| 49 | 10 hp motor |
| 50 | Rewinding the burnt out coil to the following Mono block motor with suitablecopper induction wire and count including cost of coil wire and 30 days trail run (the retrived burnt out coil should be taken back by contractor)etc complete as per std spn12.5 hp mono block |
| 51 | Rewinding the burnt out coil to the following compressor motor with suitablecopper induction wire and count including cost of coil wire and 30 days trail run (the retrived burnt out coil should be taken back by contractor)etc complete as per std spn 5 hp motor |
| 52 | 7.5 hp motor |
| 53 | Supplying and replacing the mono block motor pumpset shaft made in gunmetal of size 100 mm long and 38 mmouter dia including cost and replacing charegs with necessary accessories etc complete as per std spn 12.5 hp mono block |
| 54 | Supplying and replacing the air compresser connecting rod cost for shaft and align needle to centre point of the bearing nad centre point of worings etc complete as per std spn 5 hp compresser |
| 55 | 7.5 hp compresser |
| 56 | Supplying and replacing the Air compresser fly wheel shaft made in alloy steel of size 110 mm long and 23 mm dia including cost and replacing labour charges etc complete as per std spn 5 hp compresser |
| 57 | 7.5 hp compresser |
| 58 | Supplying and replacing of Piston and rings made in GIgh quality Aluminium to sutable size with nylon rings including cost and replacing charges etc complete as per std spn 5 hp compresser |
| 59 | 7.5 hp compresser |
| 60 | Supplying and replacing the valve plate made in GIgh quality stainless steel including cost and replacing charges etc complete as per std spn 5 hp compresser |
| 61 | 7.5 hp compresser |
| 62 | Supplying and replacing the compresser cylindermade in GIgh quality Aluminium including cost and replacing charges etc complete 5 hp compresser |
| 63 | 7.5 hp compresser |
| 64 | Supplying and replacing the Air cooling mound of aluminium necessary threat belt including cost and replacing charges etc complete as per std spn 5 hp compresser |
| 65 | 7.5 hp compresser |
| 66 | Supplying and replacing the compresser beltmade in GIgh quality Nylon rubberwire\"V\" belt including cost and replacing charges etc completeA65 |
| 67 | A67 |
| 68 | A69 |
| 69 | A70 |
| 70 | A72 |
| 71 | Supplying and replacing the compresser shaftmade in GIgh quality material including cost and replacing charges etc complete as per std spn 5 hp compresser |
| 72 | 7.5 hp compresser |
| 73 | Supplying and replacing the compresser starter relay made in GIgh quality materialincluding cost and replacing charges etc complete as per std spn 5 Amps to 10 Amps |
| 74 | 10Amps to 15 Amps |
| 75 | 16 Amps to 32 Amps |
| 76 | Supplying and replacing the starter conductor including cost and replacing charges etc complete as per std spn 5 hp |
| 77 | 7.5 hp |
| 78 | Supplying and replacing the No volt coil including cost and replacing charges etc complete as per std spn 230 volt |
| 79 | 440 volt |
| 80 | Supplying and replacing the starting codenssor running including cost and replacing charges etc complete as per std spn 150/200 range |
| 81 | 200/250 range |
| 82 | Supplying and replacing the capacitor starterincluding cost and replacing charges etc complete as per std spn 30MFT |
| 83 | 40MFT |
| 84 | 50MFt |
| 85 | Supplying and replacing the Miniature Circuit Breaker including cost and replacing charges etc complete as per std spn single pole 6 Amps to 32 Amps, 10 KA |
| 86 | double pole 6Amps to 32 Amps 10 KA |
| 87 | triple pole 63 Amps |
| 88 | four pole 63 Amps |
| 89 | Supplying and delivery and laying of 2.5sqmm three core copper flat submersible cable including cost and labour charges etc complete |
| 90 | Supplying and delivery and laying of 4sqmm three core copper flat submersible cable including cost and labour charges etc complete |
| 91 | Supplying and replacing the power capacitar for maintaining the power factor including cost and replacing labour charges etc complete |
| 92 | supply and delivery of 3 phase panel board DOL/STAR-DELTA with two level guard suitable forsubmersible motor incuding cost and conveyance of all etc complete as per std spn 5 hp submersible motor |
| 93 | 7.5 hp submersible motor |
| 94 | Single Phase Panel board with two level guard and auto start 2 hp submersible motor |
| 95 | Supply and delivery of single phase panel board DOL with two level guard suitable for 2 Hp open well submersible motor incuding cost and conveyance of all etc complete as per std spn 2 hp submersible motor |
| 96 | supply and delivery of single / three phase VOLT meterincuding cost and conveyance of all etc complete as per std spn |
| 97 | supply and delivery of Amps meter and Volt meter incuding cost and conveyance of all etc complete as per std spn |
| 98 | Supply and Delivery of following pipes and GI Specials and PVC Specials as per standard Specification. 2\" GI pipe |
| 99 | 1 1/2\" GI pipe |
| 100 | 1 1/4\" GI pipe |
| 101 | 2\" GI Union |
| 102 | 1 1/2\" GI Union |
| 103 | 1 1/4\" GI Union |
| 104 | 2\" GI Nipple (PWD pg no 110) |
| 105 | 1 1/2\" GI Nipple (PWD pg no 110) |
| 106 | 1 1/4\" GI Nipple (PWD pg no 110) |
| 107 | 11/4\" AND 11/2\" PVC Air compresser foot valve |
| 108 | 11/4\" And 11/2\" Hose Coller |
| 109 | 2\" GI Coupling |
| 110 | 11/2\"GI Coupling |
| 111 | 11/4\" GI Coupling |
| 112 | 2\" G.M GATE VALVES |
| 113 | 11/2\" G.M GATE VALVES |
| 114 | 11/4\" G.M GATE VALVES |
| 115 | 2\" NRV |
| 116 | 1 1/2\" NRV |
| 117 | 2\" Hose Collor |
| 118 | 180mm Bore caps with M.S. Couplings |
| 119 | 1 1/2\" HDPE hose (PWD SR - 105) |
| 120 | 2 1/2\" HDPE hose (PWD SR - 105) |
| 121 | 2\" Flange set with bolt nut and lather |
| 122 | Nylon rope (PWD SR - 105) |
| 123 | 2\" UPVC column Pipe (TWAD SR - 1,3) |
| 124 | 1 1/2\" UPVC column Pipe (TWAD SR - 1.3) |
| 125 | 1 1/4\" UPVC column Pipe (TWAD SR - 1.3) |
| 126 | 1 1/2\" HDPE pumpset connecter |
| 127 | 2\" HDPE pumpset connecter |
| 128 | 180mm PVC casing pipe for borewell |
| 129 | 180mm dia pvc coupling |
| 130 | Cutting and Threading of GI pipes to the site including all cost of materials and labours 32mm dia GI pipe, (Cutting, Threading10.20+28.50) |
| 131 | 40mm dia GI pipe, (Cutting, Threading13.80+32.00) |
| 132 | 50mm dia GI pipe,(Cutting, Threading17.70+35.60) |
| 133 | Supplying and fixing of following number NBC/SKF ball bearing including cost and fixing charges etc complete as per std spn No 6305 |
| 134 | No 6306 |
| 135 | No 6307 |
| 136 | No 6308 |
| 137 | No 6309 |
| 138 | Labour charges for Replacing of damaged PVC borewell Casing pipe including cost and labour for Lifting of GI pipe and pumpset setting using the hydrolic machine including cost, labour and all other charges etc., complete |
| 139 | Labour charges for atteding of cable burst / Burned cable in the borewell site including of all |
| 140 | Labour charges for atteding of minor repairs in the panel board using Electrican Grade II including of all |
| 141 | Re-Erection of Centrifugal Pumpset/Jet pumps/Submersible pumpsets and its accessories from Openwell / Borewell for attending repairs 50% of the rates mentioned under item 17(a), (b) and(c ) may be allowed fot the respective Horse power Up to 5.00 HP |
| 142 | Above 5.00 HP to 10.00 HP |
