Tender For Provn Of Liberty Paddock With Gi Pipe Enclosure At Certain Place Of Nda Khadakwasla Under Ge (P) Nda Khadakwasla
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 May 2025
0 days left
EMD
35000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
khadakwasla → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provn Of Liberty Paddock With Gi Pipe Enclosure At Certain Place Of Nda Khadakwasla Under Ge (P) Nda Khadakwasla
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-Apr-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-May-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified and directed by Engr-In-Charge. |
| 2 | Removing excavated material (soil) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as directed by Engr-In-Charge. |
| 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth getting out in soft /loose soilcomplete all as specified and directedby Engr-In-Charge. |
| 4 | M&L PCC (1:3:6) type C-2 (using 40mm graded aggregate) as in foundation, mass concrete.complete all as specified and directed by Engr-In-Charge. |
| 5 | M&L TMT bars 10mm dia and over For column cut to length bent to shape required incl cranking, bending, spirally for columns , footing,hooking ends binding with mild steel wire ( annealed) not less than 0.9 mm dia.complete all as specified and directedby Engr-In-Charge. |
| 6 | M&L TMT bars 8 mm dia and over as in stirrups spacers and binders.complete all as specified and directedby Engr-In-Charge. |
| 7 | M&L for RCC (nominalMix) type B1 (1:2:4) using 20mm graded aggregate as in Foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directedby Engr-In-Charge. |
| 8 | M&L for RCC (nominalMix) type B1 (1:2:4) using 20mm graded aggregate as inColumns, pillars, Footings, piers, posts and strutsetc all as specified and directed.complete all as specified and directedby Engr-In-Charge. |
| 9 | Use and Waste ofform work to sides of concrete foundation, footings, base of column, sides and soffit of plinth beam rough finished.complete all as specified and directedby Engr-In-Charge. |
| 10 | Use and Wasteof formwork to sides of column rough finished.complete all as specified and directed by Engr-In-Charge. |
| 11 | S&F GI pipe 65mm dia heavy duty including fittings such as elbo, socket etc . complete all as specified and directedby Engr-In-Charge. |
| 12 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps;nut and Bolt, hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-410W Gde-E-250 complete all as specified and directedby Engr-In-Charge. |
| 13 | M&L for fine sand spreading and leveling of 150 mm thick over area (in layers n.exc 25 cm thick ) complete all asall as specified and directedby Engr-In-Charge. |
| 14 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built iin cement mortor (1:4) complete all as specified& as directed by Engineer-In-Charge |
| 15 | M&L for rendering 15mm thick on fair feces of brick work or concrete surfaces in (CM 1:4) finished even and smooth without using extra cement complete all as specified and directedby Engr-In-Charge. |
| 16 | M&L preparation of new plaster surface of walls and applying two coats of cement base paint over a coat of Alkali resistant primer complete all as specified and directedby Engr-In-Charge. |
| 17 | Returning filling in includingspreading levelling watering and well ramming in layers n exc 25 cm in soil complete all as directed by Engr-In-Charge. |
| 18 | Removing excavated material (soil) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as directed by Engr-In-Charge. |
| 19 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specifiedand directed byby Engr-In-Charge.(Fe-410 W G-de-250 Quality A) |
| 20 | M&L for Painting two coats of synthetic enamel paint on steel and iron surfaces of any description over 10 Cm in width or girth including preparation and one coat of red oxide primer all as specified and directedby Engr-In-Charge. |
AI Tender Summary
Tender Timeline
Apr 26, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
May 03, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 03, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 06, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender