Tender For Extension Of Existing Pony Stand And Construction Of Approach Roads Additional Including Construction Of Sheds For Different Departments Installation Of Sign Boards Etc And Macadamization Of Approach Road Leading To Pony Stand.
Tender Value
57.94 Lakhs
Estimated cost
Bid Submission
18 Apr 2025
0 days left
EMD
1.15 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kangan → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Extension Of Existing Pony Stand And Construction Of Approach Roads Additional Including Construction Of Sheds For Different Departments Installation Of Sign Boards Etc And Macadamization Of Approach Road Leading To Pony Stand.
BOQ
| Sl. No. | Item Description |
| 1 | PART A |
| 2 | Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed 1 meter from cutting edge: (Incl Dewatering if necessary ) |
| 3 | Providing and Laying dry stone soling hand packed incl.ramming etc with all cost and carriage of materials,complete. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering ( 1:4:8) - All work up to plinth level |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works up to plinth lvl. 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying in position specified grade ofcement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works up to plinth lvl. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 7 | Centering & shuttering including strutting, propping etc. and removal of form work for Foundation Footings Bases of Column |
| 8 | Suspended floors, roofs, landings, balconies and access platforms. |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more.INCL Carriage. |
| 10 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete |
| 11 | Random Rubble stonein trenches, plinth,under the floors,sides of foundations etc, lead up to 50 m and lift upto 1.5 m. |
| 12 | 50 mm Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete. |
| 13 | Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and colouring , all complete |
| 14 | Providing colour coated hi-rib profile sheet roofing of approved brand and manufacture, fixed with polymer coated steel screws, bolts 100mm long 8mm dia with washers and PVC (upon a pitch of 60 degree) excluding the cost of purlins, rafters and trusses @ 1 mm thick.inclridges or hips and vallies of width 30cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I.limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gram/m2 incl.carriage |
| 15 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite Work |
| 16 | Providing / fixing of prefabricated structure excludingcost of columns, beams etc structural steel having following specifications wall panells 60 mm thick with 0.63 mm hard diped galvanised steel sheets on both sides with 60 mm thick layers of ridged CFC free close cell polyurethene fom. Ceiling panells 40 mm thick made 0.63 mm hard dipped galvanised steel sheets on both sides with 40 mm layers of ridged CfC free close cellpolyurethene fom |
| 17 | Providing and fixing powder coated onodized aluminium work for window and door frames with bother shutters of glazed and wire gauge of standard to sections of approved make fixed with sand plugs and screws or disposed fixtures including ACPboarding for pannels, sliding/fixed incl carriage complete as per directions of Engineer Incharge. |
| 18 | Providing and fixing of glazing for alumnium door, window & ventilators glass panes of 5mm thick including cost of gaskets beeding etc complete. |
| 19 | Providing and fixing aluminium fittings ISI marked with necessary screws etc complete |
| 20 | Handle150mm |
| 21 | Handle |
| 22 | Tower Bolt |
| 23 | L-Drop |
| 24 | P/F of following PVC pipes (Prince/Supreme make)having pressure 4 kg N/cm incld. cutting and making good the walls where ever necessary required all complete. |
| 25 | 100MM DIA |
| 26 | 75 MM DIA |
| 27 | 100MM COLLAR |
| 28 | 75MM COLLAR |
| 29 | 100MM DOOR BEND |
| 30 | S- TRAP |
| 31 | P/F of followingC.P fittings of approved brand and make (Parko, Jaguar,) or equavallent including all complete. |
| 32 | Bibcock |
| 33 | Angle valve |
| 34 | health faust |
| 35 | C.P Nipple |
| 36 | connection 450mm long |
| 37 | Looking mirror 1\"-6\"\"x2\"-0\"\" |
| 38 | Soap Case |
| 39 | Towel Hooks |
| 40 | Grating |
| 41 | Wash Basin Mixer |
| 42 | PVC Waste pipe32 mm dia |
| 43 | Waste Coupling for Washbasin and Sink |
| 44 | Construction of Brick Massonary Manholes 600X600X600 in Cement Motar incl cement concrete in 1:2:4 mix incl internal plastering and 50mm concrete flooring , incl MS Main hole cover ,complete Job |
| 45 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete,including painting of fittings and brackets, cutting and making good the walls and floors wherever required with W.C. pan with ISI marked white solid plastic seat and lid. |
| 46 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings |
| 47 | construction of cabinet counter with 19 mm solid ply board Wp ply to ply 2\"deep, including cost of decorative lamination around the shelves inside outbeading/painting in 2 or more coats, incl hardware etc complet job, measurement to be taken for finished face front. |
| 48 | Providing and supplying of water storage tank of approved brand , incl fitting complete job |
| 49 | Providing and fixing kitchen sink including making all connections excluding cost of fittings : sink of size 600x450x250 mm.incl cost of basin mixer ,coupling waste pipe all fittings complete job. |
| 50 | CARRIAGE OF MATERIALS |
| 51 | Sand for an av lead of 40 Km |
| 52 | Stone aggregate below 40mm size for av lead of 20Km |
| 53 | Part B |
| 54 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed Engineer-in-Charge. in ordinary rock |
| 55 | Providing, Laying ,Spreading & Compacting graded Crushedstone aggregate /Tunnel Muck(size range 53mm to75mm)t, carriage of mixed material by Tipper at site with all leads and lifts, Laying in Surface and Compacting with Vibratory roller of 8 to 10 tonne capacity to achieve the desired density complete as per technical specification of clause 406 of MORTH Specifications (75mm compacted thickness) |
| 56 | Providing and laying of tunnel stone dust inc carraige |
| 57 | Provision for engagement of jcb for levelling of surface for extention of pony stand |
| 58 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed 1 meter from cutting edge: (Incl Dewatering if necessary ) |
| 59 | Providing and Laying dry stone soling hand packed incl.ramming etc with all cost and carriage of materials,complete. |
| 60 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering ( 1:4:8) - All work up to plinth level |
| 61 | Providing and laying in position specified grade ofcement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works up to plinth lvl. 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 62 | Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and colouring , all complete |
| 63 | Placing and fixation of barbed wire of fencing 2mm thick 14 guage wire having necessary hooks inc carriage and head load complete job |
| 64 | Centering & shuttering including strutting, propping etc. and removal of form work for Foundation Footings Bases of Column |
| 65 | CARRIAGE OF MATERIALS |
| 66 | Sand & stone agg for an avg lead of 40 Km |
| 67 | Supply, stacking and laying of WBM grade 2nd with specified graded stone aggregate 63mm - 45mm size broken quarry stone @0.92cum/10 sqm and using of screening 13.20mm size @ 0.135cum/10sqm and binding material @0.06cum/10sqm of road surface including sorting, spreading to template, watering and consolidation to required gradient and camber with (80-100) KN road roller all-inclusive leads, lifts, loading, unloading, head load if any and carriage of materials from approved source to site of work complete |
| 68 | providing, Laying ,Spreading & Compacting graded Crushedstone aggregate (size range 53mm to75mm) to wet mix macadam(WMM)specification including[ Premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by Tipper at site with all leads and lifts, Laying in Surface and Compacting with Vibratory roller of 8 to 10 tonne capacity to achieve the desired density complete as per technical specification of clause 406 of MORTH Specifications (75mm compacted thicknes |
| 69 | Providing and applying tack coat using hot straight run bitumen of 80/100 grade including heating the bitumen and spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface to remove all dirt, dust, mud etc and finally booming the surface as per required specification on (including cost & carriage of all materials involved upto site of work complete)On WBM surface using Tar @ 0.75 kg /sqm |
| 70 | Providing and laying of 50mm thick Premixed Bitumen Macadam base course with stone aggregate of quality size and grading as specification in MORTH specifications and Straight run Bitumen of V-G-10 [email protected]% by weight of total mix including Hot Mix of stone aggregate and bitumen in hot mixing with rolling with PRR of 8-10 ton capacity to achieve the required compaction and densityincl. cost of tar and carriage of all materials upto Other site of work and all bitumen ,octroi charges, quality control etc. involved on account of labour and material including bitumen octroi charges, qualitycontrol etc complete. |
| 71 | P/L of x25 mm thick semi dence bitumen surfacing course composed of agg. Of specified grade with Bitumen binder @ 5% of Totalmix by weight in suitable hot mix plant laid with hydrostatic paver finisher to reqiredlevel grades and X-section to achieve desired compaction and density confirming to MORTH specification incl rolling and finishing complete and also incl. costand carriage of material loading unloading upto site of work complete, T&P and all allied machinery / labour testing charge for Q.C duringexecutionof after execution of workand all taxes on account of labour and material incl Bitumen complete in all respects |
| 72 | P/L 6mm thick seal coat of premixed fine aggregate passing 2.36 mm and 1.80 microns sieve with bitumen @ 0.768 Kgs/Sqm incl. mixing in hot mix plant the mixed material laid with paver finisher to required level and grades to achieve the desired compaction as per MORTH specification incl cost and carriage of materials loading / unloading upto site of work plants, equipments and all allied machinery incl. cost of bitumen complete. |
AI Tender Summary
Tender Timeline
Apr 12, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedApr 18, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 19, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender