Tender For Installation Of Solar Water Plant With Purifier At State Farm Colony Jr. Basic School At State Farm Colony Under Islampur Gram Panchayet.
Tender Value
2.03 Lakhs
Estimated cost
Bid Submission
24 Apr 2025
0 days left
EMD
4078
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
islampur → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Installation Of Solar Water Plant With Purifier At State Farm Colony Jr. Basic School At State Farm Colony Under Islampur Gram Panchayet.
BOQ
| Sl. No. | Item Description |
| 1 | Earth workin excavation offoundation trenches or drain, in all sorts of soilsincluding removing, spreading or stacking the spoils within a lead of75m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1500mm. |
| 2 | Single brick flatsoling of picked jhama bricks including ramminganddressingbegtoproper level and filling joints with powdered earth or local sand. |
| 3 | Cement concrete with graded stone ballast (40 mm size excludingshuttering) In ground floor(B) With N.B. Variety stone metal. (a) 1:3:6 proportion |
| 4 | 125mm. thick Brick work with 1st. class bricks in cement mortar(4:1) in Ground Floor |
| 5 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.River Bazree. in ground floor. |
| 6 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust(if necessary)cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.For works in foundation, basement and upto roof of ground floor/upto 4m. Tor steel / Mild steel. upto roof of ground floor .SAIL / TATA / RINL. |
| 7 | Hire and Labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hardwood planks of approved thickness with required bracing for ved or straight including fitting, fixing and striking out after completion of works.25mm. to 50mm. thick wooden shuttering as per decision & direction. upto roof of ground floor . |
| 8 | Plaster (to wall, floor, ceiling etc.)with sand and cement mortar, including rounding off corners or chamfering corners as directed and racking out joints or roughening of concrete surface including throating, nosing and drip course where necessary.c) 15mm.thick plaster with cement mortar (6:1)in G.F. |
| 9 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc(B) Wall :With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile above 0.09 Sq.m(i) Coloured decorative |
| 10 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete.The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete.a) Span up to 12 Mtr |
| 11 | (a) Priming one coat on steel or other metal surface with synthetic oilbound primer of approved quality including smoothening surfaces by sandpapering etc]Plaster (to wall, floor, ceiling etc.)with sand and cement mortar, including rounding off corners or chamfering corners as directed and racking out joints or roughening of concrete surface including throating, nosing and drip course where necessary.c) 15mm.thick plaster with cement mortar (6:1)in G.F. |
| 12 | (A) Painting with best quality synthetic enamel paint of approved makeand brand including smoothening surface by sand papering etc. includingusing of approved putty etc. on the surface, if necessary : |
| 13 | Making soak well of Precast concrete ring 50 mm thick 750 mm dia (inside) with RCC cover slab including eartwork in excavtion and ramming side after construction (each ring of 300 mm height) (LMR) including 1.650m long & 250mm width and 600mm height drain |
| 14 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.i)100 mm dia boring etc. top enlargement |
| 15 | ii)40 mm dia boring etc. |
| 16 | Reducing Socket (mm X mm) 100X40 |
| 17 | Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications |
| 18 | Supplying, fitting and fixing steel cutter piece upto 450 mm long with |
| 19 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etcrequired,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)a) For Exposed Work PVC Pipes (Dia) 15 mm |
| 20 | b)20 mm Dia (tank to tap) |
| 21 | For Exposed Work PVC Pipes (Dia) 32mm from marsal to tank |
| 22 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). 100 mm dia boring |
| 23 | 40 mm dia boring etc |
| 24 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.iii) 600 mm long |
| 25 | Supplying,fitting and fixing check valve (horizontal) G.M. tested to 21 kg |
| 26 | Supply, delivery & installation of 1005 watt peak (3 nos 335 wp each) capacity Solar photovaltatic array along with 1.00 H.P. capacity D.C. submerssible pump (Kirlosker / CRI/EQ) in the same bore (designed to use with Solar Power) of approved brand whose out put is not less than 2000 Ltr/ hour sat 40 Mtr. head including supply of all necessary materials, DC / AC wire, sensor etc. of approved quality, labour etc. with all allied works as per direction of the E.I.C. [D.C. Submerssible Pump and controller should carry a warranty of 2 year directly from the contractor](LMR) |
| 27 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (b) 1000 litre capacity |
| 28 | Labour for hoisting plastic water storage tank. (i) Upto 1500 litre capacity.(a) Upto 1st story from G.L. |
| 29 | Labour for punching hole in plastic water storage tank upto 50 mm dia. |
| 30 | Supplying and installation of 5 stages iron removal with consisting of 2 nos FRP vesel (10\" X 54\") of filtering media( packed with palin & Green Sand , Gravels,Antacide ,Carbon as per specified quantity ) includingInstalationTATA (LMR) |
| 31 | Supply and Installation of necessary Electrification |
| 32 | Water Testing (LS) |
| 33 | supply and Installation of Marble Board |
AI Tender Summary
Tender Timeline
Apr 11, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedApr 24, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 26, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender