|
| 1 | Trimming of grass, shurbs and weeds from the shoulders/berms and disposing off the same to suitable locations etc. complete |
| 2 | DismantlingofexistingB.T.Surface(flexiblePavement)toadepthof50mm.manually including loading of dismantled material to transport vehicle at site excluding lead charges |
| 3 | Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff asdirected all sorts of soils. |
| 4 | Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders/Rubbleandstackingthebrokenmetaletc.complete.(Priorapprovalofsamplestackof brokenmetalbytheEx.Engineerisnecessarythedateofapprovalwillformpartofthe measurements)a)40 mm Metal, By breaking Boulders (Hand broken). |
| 5 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. |
| 6 | Supplying soft murum at the road site, including conveying and stacking complete. |
| 7 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete |
| 8 | Spreading80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge . |
| 9 | Compactingthesubgrade/gravel/sizemetal(100mm loose)layersforallwidthswith Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificialwatering complete. |
| 10 | Compactingthehardmurumsidewidthsincludinglayinginlayersoneachsidewithvibratory roller including artificial watering etc. complete. |
| 11 | Providingandconstructing75mm.thickModified PenetrationMacadam(MPM)road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubbleobtained by blasting) heating and spraying thebitumen of specified grade @ 2 Kilogram/Square Metre, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compactionas per TechnicalSpecificationClause 506 etc. complete.Including picking of existing WBM surface. (VG-30bulkbitumenratesare considered to arrive at rates) |
| 12 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rollingtoachievethedesiredcompactionbutexcludingprime/tackandSealcoat.For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 13 | 9 MM SEAL COAT: Providing and laying of Type A 9mm premix seal coat with HMP of apropriate capacity crushed stone chiping 6.7 mm size and penetration bitumen of specified grade @ 1.2Kilogram/Sq.m,preparing existing road surface by mechanical means, spreading chipsandrolling,bystaticrollerhavingweight8to10MT.etc.complete.(VG-30bulk bitumen rates are considered to arrive at rates) |
| 14 | ProvidingandfixingRoadjunction/Informationsignboardofsize0.90mx0.60m. preparedon16gaugeM.S.sheetwithangleironframeofsize35x35x5mmincluding painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post inonepiecewithoutjointsincludingalltaxes,conveying,fixingingroundwithcement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade. |
