Tender For Pipeline Construction Work In Galaxy Coaching Shiv Nagar B Ward No. 33 Ringas - Topographic Survey By Taking Longitudinal Sections At Every 10M Interval, Cross Sections At Every 5M Interval On Either Side Of Centerline Of Road Including Supply

Sharing tender

Tender For Pipeline construction work in Galaxy Coaching Shiv Nagar B Ward No. 33 Ringas - Topographic Survey by taking longitudinal sections at every 10m interval, cross sections at every 5m interval on either side of centerline of Road including supply of detailed drawings in appropriate scale & size in soft copy & Hard copy complete all respect as per direction of Engineer and detailed alignment plans with covering all features in a width:From 10mtrs. Upto 20 mtrs. 2 Fly leveling from location of temporary bench benchmark along theproposed alignment at minimum 50 m interval & where the abrupt changed of levels including supply of drawing of L-section and levels in tabular form complete all respect as per direction of Engineer.(For disposal point of treated effluent and rising main of pipeline works etc. 3 Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation anddisposal of surplus excavated material at a lead upto 50m suitablesite as per direction of Engineer for following depths, below natural ground / Road top level. Depth upto 1.5 m 4 Providing granular bedding having width = outer dia of pipe (Bc) +500mm, thickness below pipe = 0.25Bc or 100mm (whichever ishigher) and haunching = 0.5Bc, with graded hard crusher broken stone of 100% passing through 20mm sheive, 20 to 50 % passing through 10mm sheive and 100 % retain on 6.3mm sheive, laying in layers of thickness 10/15cm including ramming, consolidation etc complete for all type of pipes of following sizes as per drawing and or as directed by Engineer 600 mm internal diameter 5 Providing at site, lowering & laying in trenches, aligning & jointing of RCC pipes NP2 class (with s/s ends IS: 458 - 1988 (amended up to date) marked and manufactured through spun process at all levels with Rubber gaskets (EPDM/SBR) for sewer lines as per IS: 5382 (including cost of Rubber gaskets lubricants) as per drawing, sectional hydro testing of the sewer pipe line (including cost and conveyance of water to site for testing) etc., complete as directed by Engineer. Note : E/w to be measured and paid separately 600 mm internal diameter 6 Providing and constructing of RR stone masonry circular manholes of Type-B with internal dia 1.20m and depth upto 2.50m having RR stone masonry wall 300 thick upto 1.5m, 450mm thick from 1.50m to 2.50m in cement sand mortar 1:4, including concreting PCC M-10 grade (1:4:8) for 225mm thick foundation including curing compaction and form work etc complete, PCC M15 for benching and channel portion, RCC M20 for 200mm thick cover slab includingreinforcement, PCC M20 for fixing the manhole frame and cover using stone aggregate 20mm nominal size, 20mm thick inside and outside plaster in C. M. 1:3, inside plaster finished with floating coat of neat cement, vata in CM1:1 around pipe entering and leaving themanhole and also at the junction of masonry and concrete slab,providing and fixing of SFRC foot steps of approved make at every 0.30m height fixed in CM 1:3, supplying and fixing heavy duty SFRC manhole frame and cover as per IS 12592 (Part I and II) having clear opening of 560mm, including refilling of Jhiri, including curing, watering, ramming, hydro testing of manhole, conveyance & cost of water, and dewatering complete as directed by the Engineer. Note:- Excavation of earth work and road cutting for manhole will be measured and paid separately.Manhole Type-B of depth 1.70 m 7 Carriage of Materials bymechanical transport includingloading,unloading and stacking ::Earth lead upto 2 km