Tender For Spl Repair To Bldg No P-281 (Civ Md Accn) Of Mes At Mil Stn Dappar Under Age (I) Dappar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 May 2025
0 days left
EMD
38698
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dappar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Spl Repair To Bldg No P-281 (Civ Md Accn) Of Mes At Mil Stn Dappar Under Age (I) Dappar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-Apr-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-May-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | BR Portion |
| 2 | Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified. |
| 3 | Demolition of mud phuska on roof any thickness all as directed. |
| 4 | Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. including providing neat cement slurry @ 3Kg/Sqm and preparing slab surface with wire brushing complete and finishing top surface of PCC rough & even to receive the bedding layer complete all as specified. |
| 5 | M & L for 50 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in roof padding, levelling course complete all specified and directed by Engr in charge |
| 6 | Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified nd directed by Engr-in-Charge. |
| 7 | M & L for PCC 1:2:4 using 12.5mm graded stone aggregates, steps; seismic and other similar bands, plinth courses, string courses, parapets and copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed and directed by Engr-in-Charge. |
| 8 | M & L priming surfaces and applying normal treatment ( for moderate conditions) using glass fibre base bitumen felt grade 2 completely and directed by Engr in charge |
| 9 | M & L for providing 3 mm thick APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric ( wt. not less than 150 gms/sqm ) land on primed surface by forced application complete all as specified and directed by Engr-in-charge |
| 10 | M & L for 20-22mm thick precast plain cement concrete tiles 25cm x 25 cm x 22 cm thick, machine pressed; set jointed and pointed in neat cement slurry in floors and cut and polished including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 11 | Demolition of brick work built in cement mortar incl all quoins, arches, pillars, etc complete all as specified and directed by Engr-in-Charge. |
| 12 | M & L Brick work with sub class \"B\" burnt bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge. |
| 13 | M & L Brick work with sub class \"B\" burnt bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except brick complete all as specified and directed by Engr-in-Charge.(serviceble Old bricks shall be reused after cleaning obtained from demolition). |
| 14 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed |
| 15 | M&L for cement plastering 10mm thick in cemet mortar 1:6 on fair faces of brick work or concrete surfaces all as specified and directed. |
| 16 | M&L for cement plastering 5mm thick in cement mortar 1:3 as on ceilings or concrete surfacescomplete all as specified and directed. |
| 17 | M&L for cement plastering 15mm thick in two layers in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer\"s instructions on brick work or concrete surfaces finished even and fair complete all as specified and as directed by Engineer-in-Charge. Note : WPC will be measured and paid separately. |
| 18 | Supply only integral liquid water proofing compound complete all as specified and directed. |
| 19 | M & L for preparing newly plastered surface and applying 02 coats of distemper oil emusion, over a coat of putty thickness vary from 1 to 1.5 mm over & including a coat of interior wall primer complete all as specified and directed. |
| 20 | M & L for removal of existing treatment and preparing the old surface to apply 02 coats of distemper oil emusion over a coat of putty thickness vary from 1 to 1.5 mm over & including a coat of interior wall primer complete all as specified and directed. |
| 21 | M & L for preparing newly plastered surface and applying 02 coats of cement based paint, over a coat of putty thickness vary from 1 to 1.5 mm over & including a coat of exterior wall primer complete all as specified and directed. |
| 22 | M & L for removal of existing treatment and preparing the old surface to apply 02 coats of cement based paint over a coat of putty thickness vary from 1 to 1.5 mm over & including a coat of Exterior wall primer complete all as specified and directed. |
| 23 | Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises |
| 24 | M & L colour glazed ceramic tiles in vertical surface 450 x 350 x 7mm / 350 x 250 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles including 15 mm thick rendering cement mortar (1:4)complete all as specified and directed. |
| 25 | M & L for joint free colour non-Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge |
| 26 | Dismantling of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors aprons etc |
| 27 | M & L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border and the like works and flooring etc, 15-16 mm thick including bull-nose the front length, set and jointed in cement slurry over & including screedof 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified. |
| 28 | S & F in repairs vitreous china wash hand basin white flat back of size 630x450mm including brackets complete all as specified and directed by Enge-in-Charge. |
| 29 | S & F 40mm Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors as directed and specified by engineer-in-charge |
| 30 | S & F in repairs vitreous china premium/1st quality Orissa Pan water closet white colour of size 580X440mm white , with integral foot rests completely all as specified and directed. |
| 31 | S & F in repairs PVC (SWR) \"S’ trap of 110mm size as directed and specified by Engr-in-charge |
| 32 | S & F in repairs 40 mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms) |
| 33 | S & F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and 32 mm dia PVC Flush pipe of polyethylene of low or high density. Also taking down existing of any description/size complete in all respect all as specified. |
| 34 | S & F in repairs of600 mm x 450 mm bevelled edge looking mirror of selected quality glass,mounted on 6mm thick AC building boards or commerical plywood and fixed to wooden plugs with chromium plated brass screws and cup washer complete all as specified and directed. |
| 35 | S & F 20-25mm dia of stainless steel curtain road fixed to wall with screws and brackets as specified and directed by Engineer- in-charge. |
| 36 | S & F in repairs shelf of PTMT fixed with and including Chromium plated brass screws and wooden / plastic cleats ( min wt 300 gms) |
| 37 | S & F in repairs sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 38 | S & F in repairs brass chromium plated shower rose 125 mm size with or without swivel joints , any size , including fixing to steel pipe or union complete in all respect all as specified. |
| 39 | S & F in repairs 15mmBib taps,CP,fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified. |
| 40 | S & F in repairs for 15mmwall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connectinglegs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed. |
| 41 | S & F in repairs pillar taps mounted with swinging spout and with capstan head , fancy type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed. |
| 42 | S & F in repairs Concealed Stop Cock, fancy type, CP with long shank and cup, stop valves , cast copper alloy , screwed down , high pressure screwed both ends for iron pipe or for unions and fixed in position complete in all respect all as specified. |
| 43 | S & F in repairs Angular Stop Cock,CP,fancy type with wall flange , fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. |
| 44 | S & F in repairs stainless steel sink with drainage board, 1.00 mm thick, glossy finish, for kitchen with plugs washers and including cantilever cast iron brackets, connecting union, and waste pipe etc, overall size 915mm x 460 with bowl size 410x 330 x 160 and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed. |
| 45 | S & F in repairviterous china soap tray embedded in the wall complete in all respect all a specified |
| 46 | S & F in repair wall mounted stainless steel plate rack of size 750x900x250mm and 1mm thicknes complete as specified and directed. |
| 47 | S & F in repair towel rail 600mm long of PTMT fixed withand including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms)complete fixed in position complete all as specified. |
| 48 | S&F in repair PVC connections 15mm size with brass nuts of length 600mm complete all as directed and specified. |
| 49 | S&F in repair grating doom 100mm dia of PTMT ( minimum weight 25 gms) complete in all respect all as specified. |
| 50 | Taking up or down existing steel tubing and connections, 15mm bore complete all as directed and specified. |
| 51 | S & F15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified. |
| 52 | Refixing 15mm bore GI steel water tubing medium grade fixed to walls complete all as specified. |
| 53 | Taking up or down existing steel tubing and connections, 20mm bore complete all as directed and specified. |
| 54 | S & F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified. |
| 55 | Refixing 20mm bore GI steel water tubing medium grade fixed to walls complete all as specified. |
| 56 | S & F in repair15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. |
| 57 | S & F in repair Ball brass valve 20mm high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed completely all as directed by engineer-in-charge |
| 58 | S & F in repair20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. |
| 59 | S & Fin repair 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including disconnectiong of existing tank and removing to store. |
| 60 | Demolition in cement concrete (unreinforced) in ground floorsand paving not exc 15 cm thickness (below or above ground level) |
| 61 | M & L Plain cement concrete 1:7:12 mix, type E-2 (using 40mm graded aggregate) as in filling of sunken portion complete all as specified and directed. |
| 62 | M & L 15 mm thick in cement mortar 1:3 , mixed with water proofing compound, on brick or concrete surfaces of wall of sunken portion, toweled to even and smooth finish without using extra cement with WPC paid and measured separately complete all as specified. |
| 63 | Taking up or down existing steel tubing and connections, 25mm bore complete all as directed and specified. |
| 64 | S & Fin repair25 mm dia GI pipe medium grade (spouts) tubes galvanised with all fittings complete all as specified and directed. |
| 65 | S & F for MS Clamps, Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay) and similar small articles conforming to Fe-290 Gde-E-165 all as specified |
| 66 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 67 | S & Fin repair for PVC (SWR) pipes, 110 mm ISI mark, single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall complete all as specified and directed. |
| 68 | S & Fin repairfor PVC (SWR) bends, 110 mm dia ISI mark fixed complete all as specifed and directed. |
| 69 | S & Fin repair PVC (SWR) junction single 110 mm, (single T) equal or unequal completely as specified and directed by Engr-in- charge. |
| 70 | S & Fin repair 110 mm PVC (SWR) vent cowl as specified and directed by Engr-in-charge. |
| 71 | M & L 100 mmPVC (SWR) floor trap, plain with grating including jointing with solvent cementas specified and directed by Engr-in-Charge |
| 72 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqmincl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. |
| 73 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. |
| 74 | S & F Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. |
| 75 | S & F Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. |
| 76 | M & L for roviding plain cement concrete 1:3:6 type C0 (using 12.5 mm graded stone aggregate ) as in holdfast blocks/ filling in chowkats complete all as specified and directed. |
| 77 | S & F 100mm Butt hinges heavy wight , cold rolled mild steel and fixed complete all as specified and directed. |
| 78 | S & F Aluminium handles 150 mm cast type anodisedcomplete all as specified and directed. |
| 79 | S & F 150 mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 80 | S & F150mm Aluminium alloy , anodised , sliding door bolt with hasp , staple (bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium, alloy and fixed complete all as specified and directed. |
| 81 | S & F Floor door stopper of aluminium alloy body and tongue and 150 mm overall length of cover plate, anodised, with hard drawn steel spring , fixed in floor |
| 82 | S & F factory made flush shutters 35 mm thick solid core construction , with block board core and plywood face panels , commercial type on both sides complete all as specified and directed. |
| 83 | S & F 35mm thick glazed and skelton shutters 2nd class hard wood , open rebated and prepared to receive glass , gauze etcc ( without sash bars), edges of framing plain , chamferd or rounded. Fitted with cut and mitre beads for securing glass etc.; sizes of members of shutters as specified in ssr part 1 , secton 8 , clause 8.24 (a) ; supplied and fitted to chowkhats complete all as specified and directed. |
| 84 | S & F Galvanised mild steel wire cloth thickness 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed. |
| 85 | S & F sheet glass 3mm thick , ordinary quality in squares n exc 0.5 sq.m each pane shall be measured completely as specified and directed by Engr-in- charge. |
| 86 | S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate fixed complete all as specified and directed. |
| 87 | S & F anodised aluminum frame for doors, windows , ventilators with one or more rebates including joining cleat for fixing etc. including powder coating to minimum thickness of powder coating 50 micron complete all as specified and directed by Engr-in-charge. |
| 88 | S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) and powder coating of any colour (Thickness or powder coating notless than 50 micron) complete all as specified . |
| 89 | S & F 3.0 mm thick figured glass , pinched type in squares n exc 0.5 sq.m each pane completely as specified and directed by Engr-in- charge. |
| 90 | S & F factory made aluminium 50 micron powder coated grill fixed in position in windows in all respect as specified |
| 91 | M & L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 92 | M & L for preparing old wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 93 | Dismantling of boarding of any type/sizein any position in hardware (if any) etc complete all as specified. |
| 94 | M&L plain fillets as in 2nd class hard wood square rectangular in section wrought secured with screws sectional area exc 6 but n. exc 13 Sqcm. Complete all as specified and directed. |
| 95 | M&L Prelaminated particle board,18/19 mm thcik both side interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work |
| 96 | S&F Piano/continuous hinge of size 40 mm (when open) stainless steel complete all as specified. |
| 97 | S&F Solid PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC Sheet reinforced with MS Square tube , supplying & fixing in opeinging all as per specified and directed. |
| 98 | S&FFactory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing inframe at site as per specification & drawing as directed by engineer in charge |
| 99 | Dismantling wrought ironor mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bar or grating complete all as specified and directed by Engr-in-Charge. |
| 100 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed by Engr-in-Charge. |
| 101 | M&L Preparation of newly or previously untreated steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. |
| 102 | EM Portion |
| 103 | Taking downcarefully Copper/aluminium point wiring on wooden batten /pvc conduit /Pvc casing and capping (light/Socket/Power) complete including (Fittings such as switches, ceiling roses, pendants, regulators, sockets electric energy meters, light fittings,etcto be measured separately) removing materials to store and making good distrubed surfaces of walls. Floors etc to match with the existingincluding disconnection of ceiling/exhaust fan connection, complete all as specifed and directed by Engr-in charge. |
| 104 | Taking out existing sub main wiring of any description and size including earth wire incld wooden battens/ conduits/quities from stone/brick masonry walls, roofs, floors, etc. all as directed by Engr-In- Charge. |
| 105 | M& L in replacement of Point wiring complete with 1.5 sqmm (nominal area) PVC insulated unsheathed multistranded copper condutor single core cable 1100 volts grade FRLSH ISI marked drawn through and incl non metalic PVC conduit, ISI marked of not less than 20 mm dia,Medium grade , concealed in wall and on surface along the roof, etc, with all connected fittings including MODULAR WHITE COVER PLATE WITH FRAME - 1 module/ 2 module/3 module/4 module/6 module/8 module/12 module, etc., MODULAR METAL FLUSH BOX - 1 module/ 2 module/3 module/4 module/6 module/8 module/12 module, etc., and including FRLSH PVC insulated unsheathed multistranded single core copper conductor cable of size 1.5 sq mm green in colour as in earth continuity conductor connected to common earth dolly and all metal parts of fittings as specified and directed for the following:-Note:- modular switches, sockets, ceiling rose, regulators, etc shall be measured and paid separately. Quoted rate is deemed to be inclusive of cost of cutting chases in wall for incorporting conduit and cost for making good to existing wall with CM 1:4 not exceeding 10 cm grith & painting same so as to match the existing wall. |
| 106 | (a) One light/fan/Bell point controlled by one switch |
| 107 | (b) One lightpoint controlled by two way switch |
| 108 | (c) One 3 pin socket outlet independent 5 Amps |
| 109 | (d) One socket outlet 5 Amps on the same board with other switches. |
| 110 | (e) One 6 pin 5/15 Amps socket outlet independent with 2.5 Sqmm size copper conductor cable and2.5 sqmm copper cables as earth wire. |
| 111 | M&L in replacement of Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 2x4 sqmm (line conductor) & 1x 4 sq mm (earth conductor), 1100 V grade drawing in & including heavy duty non metalic PVC conduit, ISI marked, incl accessories not less than 25 mm in dia & concealed in wall, roof etc including PVC insulated, FRLSH unsheathed single core multistranded copper conductor cable, green in colour as in earth conductor including cutting charges for concealed conduit wiring etc and making good cutting not exceeding 10 cm grith complete all as specified and directed.Note : (i)Two runs of copper conductor cable and one run of copper earth wire including PVC conduit will be measured and paid as one unit only. (ii). Suitable size cable lugs copper fabricated will be measured in the quoted rate only. (iii). Cost of cutting chases in wall for flush fitting of DB and making good to wall with CM 1:4 and painting the same in order to match the same with the existing wall all to the satisfaction of Engr-In- Charge is deemed to be included in the quote rate. |
| 112 | S&F Modular switch one way 6A , 1 Module type single pole 240 volts , 1Way Switch equivalent in specified colourcomplete all as specified and directed by the Engr-in-charge. |
| 113 | S&F Socket, 6A- 2/3 pin combined 2 Module complete all as specified and directed by Engr-in-Charge. |
| 114 | S&F Modular switch 2 way 6 A, 1 module type single pole 240 volts and complete all as specified and directed by the Engr-in-charge. |
| 115 | S&FModular socket 16Amps 2/3 pin combined 2 module240 Volts complete all as specified and directed by the Engr-in-charge. |
| 116 | S&FModular switch 16Amps 2/3 pin combined 1 module240 Volts complete all as specified and directed by the Engr-in-charge. |
| 117 | S & F Modular bell push 6 Amps 1 Modules 240 Volts complete all as specified and directed by the Engr in -Charge. |
| 118 | M&L in replacement Multi Music type bell Ding Dong AC, 230 V single pole complete all as specified and directed by Engr-in-Charge. |
| 119 | M&L for Taking down ceiling fan / Exhaust Fan and connected cables removing it to safe place and Re-Fixing ceiling fan / Exhaust Fan and connecting up including provision of cable from ceiling rose to fan complete all as specified and directed by Engr-in-charge. |
| 120 | S&F Modular Fan step regulator, 120 w-1/2 module 240 volts and complete all as specified and directed by the Engr-in-charge. |
| 121 | Supply and fixingin replacement ceiling rose bakelite, 63.5mm3 terminals with base plate ISI marked, complete all as specified and directed by Engr-in-charge. |
| 122 | Supply and fixing in replacenment Modular Angle holderwithinsulated body with back plate for LED lamps all as specified and directed by the Engr-in-charge. |
| 123 | Supply and fixing in replacement LED lamp 9 watt, retrofit all as specified and directed by Engr-in-charge complete. |
| 124 | Supply and fixing in replacement mirror light fitting LED 10W, 230 V, 2ft all as percomplete all as specified and directed by Engr-in-Charge. |
| 125 | Supply and fixing in replacement Bulk HeadLED 10W, 230 V,complete all as specified and directed by Engr-in-Charge. |
| 126 | S&F in replacement of LED tube light fitting (including LED tube) 1 X 20 W 230 Volt surface and wall mounted LED batten, extruded aluminium housing provided with efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with all accessories internallyprewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size fixed on wall/ceiling complete all as specified and directed. |
| 127 | S&F in replacement connecting up testing and commissioning industrial corrosion proof IP 65 / 66luminaire LED 35 W suitable forBuilding security light made out of pressure die cast aluminium housing(including suitablebrackets, clamps etc) complete with all accessories prewired including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed . |
| 128 | Supply and fixingin replacement of MCBSP 6 -32 Amps,10 KA,,\"C\" series 240 V ISI marked.complete all as specified and directed by Engr-in-Charge. |
| 129 | S&F 4 Pole, 415 V, TPN MCB , 40-100 Amps with breaking capacity 10KA complete all as specified and directed by Engr-in-charge. |
| 130 | S&F for wall flush mounting Sheet metal enclosureTPN distribution board, double door, IP 43 class, including suitable size copper bus-bar, 415V,4 way with shrouded neutral bar, earth bar and incld. cable ties and suitable size blanks, including taking down of existing sheet metal enclosure complete all as specified and directed.NOTE - (a). Cost of suitable size cable lugs and materials required for flush fixing of DB is deemed to be included in the quoted rate. (b). Cost of cutting chases in wall for flush fitting of DB and making good to wall with CM 1:4 and painting the same in order to match the same with the existing wall all to the satisfaction of Engr-In- Charge is deemed to be included in the quote rate. |
| 131 | Supply and fixing in replacement 8 way power lineSPN distribution board 240 volts with double door fitted with Bus Bars 200amp, IP-53, Neutral Links, Blanking Plates neutral bus bar, earth bar, dinbar, detachable gland plate , interconnectionsetc without MCB & ‘G FRAME’ complete all as specified and directed.NOTE - (a). Cost of suitable size cable lugs and materials required for flush fixing of DB is deemed to be included in the quoted rate. (b). Cost of cutting chases in wall for flush fitting of DB and making good to wall with CM 1:4 and painting the same in order to match the same with the existing wall all to the satisfaction of Engr-In- Charge is deemed to be included in the quote rate. |
| 132 | Supply and fixingin replacement MCB SPN 40-63 Amps,10 KA \"c\" series 240 V ISI marked.complete all as specified and directed by Engr-in-Charge. |
| 133 | Taking out old and M& L Earthing complete by using GI wire as earthing lead and MS galvanized earth plate of size 60 cm x 60 cm x 6.3 mm as earth electrode surrounded by charcoal and salt, buried directly in ground vertically in pit of depth not less than 2.25 meter below the ground with top edge of the earth plate at a depth of less than 1.5 mtr below ground level surounded from all sides with mixture of charcoal dust and common salt in alternate layers and electrode connected to galvanized iron wire 4 mm dia by means of bolts, nuts, checknuts and washers of galvanised iron connected iron connected to main switch board or main control board all as shown in electrical plate No 3 of SSR 1991. Pt I and including necessary exc. and earth work. The rate also include testing, 20mm bore light grade GI pipe for watering, funnel, wire mesh, PCC chambers in cement concrete (1:3:6) type CI 40 mm thick RCC(1:2:4) type B-1 cover and CI frame , charcoal and comman salt filling in alternate layers , etc.complete all as specified and directed by Engr-in-Charge. |
| 134 | Supply and layingin replacement , trenches or fixing or passing through pipes or fixed to wall / pole 1100 volts gradeXLPE insulated, armoured heavy duty electric cableswith stranded aluminium conductorof cross sectional area 4 x 25 Sqmm complete all as specified and as directed. |
| 135 | Supply & fixing in replacement of 40 mm bore tubes for protection of cable , light grade galvanised with all fittings and fixed laid in trenches complete all as specified and directed |
| 136 | Excavation in trenches in soft/loose soil n exc 1.5m wide andn. Exc1.5m deep and getting out includingforming bottom surfaces to required level or slope for taking out embeded cables,brick/pcc protective tiles and relaying new/old cable complete allspecified and all as directed by engineer incharge. |
| 137 | M&L sand cushioningng (drysand) to under ground cable for cable protection provided with layers 8cm deep before layingand 15 cm after laying the cable complete all as specified and directed.Note :- Punned thickness will be measured only. |
| 138 | Supply and laying in replacement of factory un reinforced precast concrete cable cover class LV, type-1, flat,size 250 x 150 x 40mm with ISI mark factory made complete all as specified & directed. |
| 139 | Removal of surplus excavated soil to a distance exc 50 m but not exc in 100 m and deposited where directed at a level n\"exc 50 m above the starting point complete all as specified and directed. |
| 140 | Returning filling in soft/ loose soil in trenches including spreading, leveling watering and well ramming in 25mm thick layer complete all as specified and as specified. |
| 141 | Supply and lay in replacementpipe galvanized, “Medium class”, including fittings 20mmdia. Completeall as specified and directed by Engr-in-Charge. |
| 142 | Supply and lay in replacement pipe galvanized, “Medium class”, including fittings 25mmdia. Completeall as specified and directed by Engr-in-Charge. |
| 143 | M&L in replacement for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of bore dia 25 mm. |
| 144 | M&L in replacement for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of bore dia 20 mm. |
AI Tender Summary
Tender Timeline
Apr 28, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
May 03, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 03, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 05, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender