Tender For Construction Of Pd Shop In Karatholuvuh/O Karatholuvu(Type I) (S.F.No :1055)
Tender Value
13.30 Lakhs
Estimated cost
Bid Submission
22 Apr 2025
0 days left
EMD
13300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
madathukulam → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Pd Shop In Karatholuvuh/O Karatholuvu(Type I) (S.F.No :1055)
BOQ
| Sl. No. | Item Description |
| 1 | 1.Construction of PD Shop in KaratholuvuH/O Karatholuvu(Type I) (S.F.No :1055) |
| 2 | Earth work excavation and depositing on bank with in initial lead of 10m andlift of 2m in hard gravelly soil as per SS 20 B for foundation |
| 3 | Cement concrete 1:4:8 mix using 40mm ISS metal including cost andconveyance of all materials to site and all labour charges for mixing, layingand curing etc complete for foundation |
| 4 | Collection and supply of gritty gravel from appd quarry including costand conveyance of all materials to site including all labour charges forfilling etc.complete. |
| 5 | Supplying and erection of centering for sides and soffit with M.S.sheetand country wood props including hire charges for materials and all labourcharges etc completeBelow sill level |
| 6 | Grade beam |
| 7 | Roof Slab |
| 8 | Supplying and fabrication of steel including cost and conveyance of steelto site and cost of binding wire including all labour charges for cutting,bending, tying and forming grills for all works |
| 9 | Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal includingcost and conveyance of all materials to site and all labour charges formixing, laying, finishing and curing etc complete.a) Below Basement& Grade beam |
| 10 | b) Above Basement |
| 11 | Brick work in cement mortar 1:5 mix using country bricks including costand conveyance of all materials to site and all labour charges etc complete.a) Below Basement |
| 12 | b) Above Basement |
| 13 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grindingmachine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. Itshall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1stcoat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of puttyand then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates areinclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges forgrinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be gotapproved by the Executive Engineer before use on work. |
| 14 | Plastering with cement mortar 1:5 mix to 12mm thick including cost andconveyance of all materials to site and all labour charges etc complete. |
| 15 | Granolithic floor finish with cement concrete 1:2:4 mix using 10-12mmISS chips including cost and conveyance of all materials and all labourcharges etc, complete. |
| 16 | Dadooing of walls with colour glazed tiles of size 300x450x8 mm of bestquality including cost and conveyance of all materials to site and all labourcharges etc complete. |
| 17 | Paving the floor with pre-polished concrete anti-skid tiles (Required shapeand design) of 20mm thick of approved quality and colour laid in CementMortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thickand pointed with white cement mixed with colouring pigment at the rate of0.40 Kg. / sq.m., curing, etc., complete complying with standardspecification and as directed by the departmental officers. (The make andbrand of the tiles should be got approved by Executive Engineer before useon works) Using anti-skid tiles (Observed Data) |
| 18 | Distempering two coats including cost of all materials and labour chargesetc, complete. |
| 19 | Painting two coats over OLD or NEW Plastered surface using ApprovedQuality of Exterior Emulsion Paint including cost and all Labour chargesetc., complete for 10 sqm |
| 20 | Supplying and fixing P.V.C rainwater down fall pipe of 110mm dia with necessary shoes, bends,& clamps etc., |
| 21 | Supplying and fixing of RCC Rings 900mm dia for leachpit including all costof material,conveyence and all labour charges etc,complete |
| 22 | Supplying and fixing of water closet, with \"p\" trap & foot rest-1Set icluding all cost of materials , conveyance and all labourcharges., |
| 23 | Supplying and fabrication of the following steel doors , window,Ventilators and counter including cost and conveyance and all charges etccomplete. |
| 24 | Steel door D1 1.00 x2.10m |
| 25 | Steel door D2 0.90 x2.10m |
| 26 | Steel window 1.00 x1.30m |
| 27 | Steel window 0.90 x1.30m |
| 28 | Steel ventilators 0.90x0.60m |
| 29 | Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make ofapproved size and section using 18 GI sheet. The shutter shall be paintedwith one coat of red oxide primer and the rate is inclusive of hood covers,transportation charges etc Manually Operated |
| 30 | Wiring with 2x1.5(22/0.3) sqmm PVC unsheathed SC Copper conductor of1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVCaccessories and with T.W. switch box with 5amps F.T. switch in flush withwall covered with hylum sheet of 3mm thick with painting of suitable colourwith continuous earth wire connection of 14 SWG wire for open Lightpoint/fan point (5 points per coil) [ SD No. 21 ] |
| 31 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduitpipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box for 5A 3 pin non interlocking flush type CS plug wfth paintingof suitable colour with continuous earth wire connection of 14 SWG TC wirefor open plug point ( SD - 10 ) |
| 32 | Supply and fixing of single box type 4\"36W fluorescent fitting complete withelectronic ballast with TW round blocks on wall or ceiling with flu tube withPVC unsheathed Copper leads from terminals to the fitting ( SD - 87 ) |
| 33 | Supply and fixing of 1200mm (48\") sweep AC ceiling fan complete withstepped electronic 300W regulator with 1 metre down rod with fan clampwith side plates and cross arm of size 450mm (18\") ( SD 106 ) |
| 34 | Supply and fixing of TNEB meter board suitable for 32A singlephaseservice connection with 32A fuse unit (500V) 32A neutrallink and earthlink(1\"x1/8\"copperflat) on TWplank of size3 75mmx300mmx19mm withsupporting TW reeper of 1\"thick aneither side with painting withs uitable boltand nuts for fixing the TW plankon wall with earth connection andinterconnection with 7/20 PVC insulated copper wire from EB meter to fuseunit ( SD - 125 ). |
| 35 | Supply and run of 2 of 4sq.mm.(56/0.3) PVC insulated SC unshea thedcopper conductor of1100V on 7/20GI bearer wire for service connectionmains ( SD -65 ). |
| 36 | Supply and run of 2 x1.5sq. Mm(22/.3) PVC insulated SC unsheathed CU.Conductor of 1100Grade in 25mm Dia GI PIPE (Glass\"B\")suitably Bent atboth ends with necessary angle iron upright and end supports for Mains[SD 69] |
| 37 | Provision for Name board charges |
| 38 | GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column \"BB\" for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) |
AI Tender Summary
Tender Timeline
Apr 10, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedApr 22, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 22, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender