|
| 1 | Taking out existing CC interlocking paver blocks from footpath/central verge, including removal of rubbish etc. disposal of un serviceable material to the dumping ground. As per DSR 16.83 |
| 2 | Excavation in foundation in ordinarysoil, loame, clay or sand including lift upto 1.5 m & Iead upto 30m Including filling watering & ramming of excavated earth into the trenches or into the space between the building & the sides of foundation trenches or in to the plinth removal & disposal of surplus earth as directed by the engineer in charge upto a distance of 30m from the foundation trenches. as per PWD S.N.251 |
| 3 | Cement concrete with 4 cm. (1½\") gauge brickballast, fine sand and cement in the proportionof 8:4:1 including supply of all materials, labour and T&P etc. required for proper completion of the work.as per PWd S.N.275 |
| 4 | First class brick work in 1:4 cement and Coarse sandmortar in foundation and plinth including\" supply of all materials,labour and T&P etc. required for proper completion of the work.as per PWD S.No.305) |
| 5 | Earth filling in embankment in ordinary soil excavation to be in the regular pits not exceeding 0.5 m in depth and 20 cm in layer 1/C ramming, dressing etc. complete but 3 km carted and Compacted earth including Royalty. As per SOR 253. |
| 6 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density complete work.(analysis rate) |
| 7 | Providing and laying of factory made 80 mm thick Interlocking cement concrete tiles (300 mpa) including 25 mm thick compacted bed of fine sand compacting and proper embedding/laying of Interlocking tiles leveling and dressing of surface to required level and slope,filling joints with local sand including the cost of material,labour T&P etc.required for proper completion of work as directed by E/I. (Item No 1,New Item,Road Work,Chapter 20) |
| 8 | 12 mm thick plaster1:5 with Cement and coarse Sand mortar over brick work minimum thickness not to be less than 3/8\" (10 mm) thick including supply of all materials, labour and T&P etc. required for proper completion of the work.as per PWD S.No 584(i) |
| 9 | Cement concrete with 2 cm.gauge approved stone grit, approved coarse sand and cement in the proportionof 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion of the work.as per PWD S.No.279( i) |
| 10 | R.C.C. work with cement approved coarse sand and 2 cm (3/4\") gauge approved stone ballast in the proportion of 1:2:4 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.l. binding wire and includuing Necessary centering and shuttering etc.and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding wire cost being included in the item.as per PWD S.No.284 A for slab |
| 11 | 5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.5.22.1 Mild steel and Medium Tensile steel bars.(DSR 2019) |
| 12 | Sign Board |
