Tender For Shifting Of Balance Master Sewer Line Along Dwarka Expressway By Providing And Laying Of 2000Mm Dia Rcc Np3 Pipe Lines And 500Mm Dia Pipe Lines Along Spr Near Cloverleaf On Nh -48 And Construction Of M.H`S Etc. Complete In All Respect And All , Gurugram-Haryana
TDR : 48643682
Tender Notice
BOQ
Expired
Gurugram
Haryana
Tender For Shifting Of Balance Master Sewer Line Along Dwarka Expressway By Providing And Laying Of 2000Mm Dia Rcc Np3 Pipe Lines And 500Mm Dia Pipe Lines Along Spr Near Cloverleaf On Nh -48 And Construction Of M.H`S Etc. Complete In All Respect And All
Name of Work: Shifting of balance master sewer line along Dwarka Expressway by providing and laying of 2000mm dia RCC Np3 pipe lines and 500mm dia pipe lines along SPR near Cloverleaf on NH -48 and construction of M.H`s etc. complete in all respect and all other works contingent thereto (including 3 years defect liability period free of cost)A/c Rs. 979.96 Lacs
Sl. No.
Item Description
1
Providing, lowering, jointing and testing of RCC Np3 pipe 3mm HDPE Lining with rubbering roll on joints confirming to in all respect to IS 458 :2003(with latest amendments if any) in to trenches for all depth laying out the same to correct alignment , gradient levels including all dressing ,trimming cutting of complete beds joints, holes ,supporting the pipes and specials incorrect positioning a suitable rigid manner which the same one being jointed with the surrounding benching hands involves are completed .The dimension of sewerage system for rubbering roll on joints shall be as per table 9,10,11,14 of ISI specification No. 458/2003. Each pipe shall bear the ISI certification work. The pipe shall on bed at all points through out their length to ensure this may should granted wherever necessary including carriage loading ,unloading, stacking at convent point, complete in all respect as per respective item of HSR to the entire satisfaction of Engineering-in-Charge. 500mm i/d RCC Np3 pipe
2
Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered): Depth exceeding 4.5 m but not exceeding 6.00 m
3
Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered): Depth exceeding 6.0 m but not exceeding 7.50 m
4
Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered): Depth exceeding 7.5 m but not exceeding 9.00 m
5
Providing, lowering, cutting, jointing and testing RCC pipe Class - Np3 with HDPE lining as per IS 458 - 2003 with spigot and socketted joints manufactured with ISI marked Sulphate Resistance Cement as per ISI 12330 with rubber rings ISI marked, antitermite as required at site, into trenches, for all depths and laying out the same to correct alignment, gradients and levels including dressing and trimming and cutting of concrete beds and sides of trenches, if required, jointing with rubber rings in trenches and jointing with 1: 11/2 cement sand mortar and with end dowels filled with 1:1 1/2 cement sand mortar and finishing the joints at an angle of 45 degree with faces of spigot of socket joints cutting and finishing the cut surface including cartage, loading and unloading and CCTV survey after laying of pipe line for inspection and checking the levels, straightness, jointing of pipe line complete in all respect. 2000 mm i/d RCC pipe NP3
6
Making connection of proposed 2000mm i/d master sewer line with existing 2000mm i/d master sewer line including all material and labour etc. complete in all respect.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
