|
| 1 | Repairing, Reconditioning of old & damaged conveyor pulley for 2x210 MW CHP: |
| 2 | By means of fabrication of new shaft & other allied works etc. |
| 3 | Drive pulley Type D-1 |
| 4 | Drive pulley Type D-2 |
| 5 | Non Drive Snub pulley Type ND-1 |
| 6 | By means of fabrication of Shell & other allied works etc. |
| 7 | Having Shell Dia 630mm, Thickness 14mm, Material: MS |
| 8 | Having Shell Dia 500mm, Thickness 12mm, Material: MS |
| 9 | Having Shell Dia 400mm, Thickness 12mm, Material: MS |
| 10 | By means of Repairing of Bearing portion of pulley Shaft & other allied works etc. |
| 11 | Drive Pulley of Type (2) Having Bearing Portion dia: 140 mm |
| 12 | Drive Pulley of Type (2)Having Bearing Portion dia: 160 mm |
| 13 | Drive Pulley of Type (2) Having Bearing Portion dia: 180 mm |
| 14 | Bend Pulleyof Type (4) Having Bearing Portion dia: 100 mm |
| 15 | Non Drive Pulley Having Bearing Portion dia: 140 mm |
| 16 | Repairing of following items: |
| 17 | Rotor lock nut of Crusher shaft |
| 18 | Upper kick of Plate size: 2695x375x40 mm |
| 19 | Multi Disc (Simpack) of following sizes: |
| 20 | ID: 150mm, OD: 286mm, PCD: 222mm, No. of holes-10, Bore of holes: 25mm. |
| 21 | ID: 100mm, OD: 215mm, PCD: 160mm, No. of holes-06, Bore of holes: 17mm. |
| 22 | ID: 158mm, OD: 260mm, PCD: 186mm, No. of holes-10, Bore of holes: 21mm. |
| 23 | Making required sized bore and key way in various flexible couplings: |
| 24 | Fabrication/Repairing of Following items: |
| 25 | Breaker Plate (Size: 1455mmx835mm) |
| 26 | Fabrication of Aluminium Dust seal for Plummer Blocks of following Bearings: |
| 27 | Bearing No.22222 |
| 28 | Bearing No.23032 |
| 29 | Bearing No.23036 |
| 30 | Fabrication of Love Joy coupling with desired bore sizes, Keys and splines along with suitable rubber spider |
| 31 | Fabrication of Foundation Studs for Plummer Block(42X550 mm with 125mm Thread Both side) with both side nut and locknuts (Material: EN-8) |
| 32 | Fabrication of Foundation Studs for Gearbox foundation Frame (50X670 mm with 110mm Thread)with Nuts , Locknuts and washer (Material: EN-19) |
| 33 | Fabrication of Foundation Studs for Column (50X1070 mm with 110mm Thread)with Nuts , Locknuts and washer (Material: EN-19) |
| 34 | Fabrication of Inhaul Coupling bolts along with Bush as per sample. |
| 35 | Fabrication of Pin for Inhaul arm of Beetle Charger, Material:EN-8 |
| 36 | Repairing & Reconditioning of Eccentric shaft (Length=2530mm) of vibrating screen (TE-13, Size:7x16) |
| 37 | Fabrication of Suspension Bars(Size: Length-2760mm, dia-54mm) |
| 38 | Repairing of tripper trolley wheel Assembly |
| 39 | Fabrication of unbalance weight of vibrofeeder motor |
| 40 | Repairing and reconditioning of damagedunbalance weight of vibrofeeder motor |
| 41 | Fabrication of shock foot rest of Hydro motor of Side Arm Charger |
| 42 | Fabrication of Catcher rod (72x2000 MM) for rod catcher arrangement |
| 43 | Fabrication of Square head bolt (30x370mm, head 45x45mm) |
| 44 | Fabrication of Vibro Feeder foundation Stud(Size: 20x450 mm, threaded length: 85mm) and Washer 02 Nos. (thick:05mm) |
| 45 | Fabrication of Bolt (24x100mm, Pitch=2.0 mm), Material: HT Gr.10.9 |
| 46 | Fabrication of pin for eye rod ofHydraulicclamp of Wagon Tippler # 3&4 |
| 47 | Fabrication of Bolt: 16 x175 mm, Material:EN-8 |
| 48 | Repairing of Fusible plug |
| 49 | Fabrication of Jack Bolt (24x300mm) of Vibrating screen motor foundation. |
| 50 | Finishing of deformed Labyrinth seal of Plummer block (Bearing 22240CCK/W33) |
| 51 | Repairing of Pin Shaft (65x395mm) of vibrating screen motor foundation. |
| 52 | Repairing of sheave pulley of vibrating screen. |
| 53 | Fabrication of Eye bolt for pan spring of suspended vibro feeder |
| 54 | Repairing & reconditioning of damaged Troughing roller using new shaft (L:560mm, Dia. 25 mm) |
| 55 | Repairing & reconditioning of damaged Return roller using new shaft (L:1660mm, Dia. 25 mm) |
| 56 | Fabrication of Bearing housing cover (OD: 325 mm, Width: 65mm, thick: 15mm) of Tru flo Feeder TE-13(16’x7’), Material: C.I. |
| 57 | Fabrication of Lever & Brass Bush (03 Nos., OD: 30 mm, Thick: 20mm, ID: 20mm) of Scoop coupling , Material: CI, Arms Dimensions (L1:250mm, width:20mm,Thick:18mm, L2: 200 mm, width:18,Thick:18mm) |
| 58 | Repairing of bearing portion of Tru flo Feeder TE-13. (16’x7’) Casing |
| 59 | Fabrication of tight fit type Bolt (40x180 mm Pitch=3.50mm, Material: HT Gr.10.9.) for WT# 3&4 Sector Gears |
| 60 | Fabrication of tight fit type Bolt (20x80mm. Pitch=2.0mm), Material: HT Gr. 10.9 |
| 61 | Repairing of Dust suppression Water Pump (cap. 38.3KW) by replacement of impeller and repairing of shaft |
| 62 | Fabrication of manually adjustable frame of return roller |
| 63 | Fabrication of return roller frame/bracket |
| 64 | Repairing of Scoop controlled Fluid coupling Oil Pump |
| 65 | Fabrication of Feeding tripper flange coupling of conv. 8A & 8B |
| 66 | Fabrication of Resilient plate of Fluid Coupling (HFD9X, FCU16.25, FCU17.75 and T-12/08) |
| 67 | Fabrication of Screen plate of Crusher TE120/270 (Material: SAILMA-350HI, Thick: 40mm) |
| 68 | Repairing & Reconditioning of vibrating screen (TE-13, Size: 7x16) Gear |
| 69 | Repairingof Cage actuating Mechanism for Ring Granulator (TR120/270) |
| 70 | Repairing & Reconditioning of Scoop coupling Rotor/Impeller Shaft (SC9/10/14, dia: 75-100mm) |
| 71 | Repairing of tippler hydraulic pump pinion shaft |
| 72 | Repairing of Scoop coupling bearing housing |
| 73 | Fabrication of coupling Bolt (8x65mm, pitch=1.25mm, Material: EN-8) for Stacker-Reclaimer Travelling wheels |
| 74 | Fabrication of Vibro Feeder foundation Stud(25x500mm, threaded Length: 85mm) and Washer 02 Nos. (thick=08mm) |
| 75 | Repairing of Crusher Plummer block (Bearing 22240CCK/W33) |
| 76 | Repairing of Vibromotorbearing housing |
| 77 | Repairing of Gate valve (100/125/150mm) |
| 78 | Repairing work of items/spares against Wagon Tippler of CHP 2X110MW: |
| 79 | Inhaul Wheels Assembly along with replacement of bush |
| 80 | Inhaul rope pulley |
| 81 | Inhaul Gear box side Drum coupling |
| 82 | Inhaul Motor Side coupling |
| 83 | Inhaul arm wheels |
| 84 | Fabrication of tight fit type bolt (30x150mm, pitch=3.5 mm), Material: HT Gr.10.9 |
| 85 | Fabrication of tight fit type bolt (24x150mm, pitch=3.0mm), Material: HT Gr.10.9 |
| 86 | Fabrication of Lever Pin (Dia. 80mm, Length 280mm) of WT#1&2 |
| 87 | Brake shoe liner for WT#1&2 (450x220x10mm) (1Set =02 Nos Liner) |
| 88 | Brake liner brass screw 8x50 mm with nut |
| 89 | Repairing and reconditioning of Roller shaft, Pulleys shafts, Crusher shaft, Vibrating screen shaft & Grating, Flap gate, End disc of Crusher & other Miscellaneous works related to CHP 2X110 MW Unloading Plant |
| 90 | Dismantling, Removal, Transportation, Repairing/ Reconditioning and dynamic balancing of damaged carrying/impact/ return roller shafts of 1000/1200/1400mm conveyor of 2X110 MW Coal Handling Plant |
| 91 | Repairing & reconditioning of Head Pulley of Conveyor 2A/2B, 4A |
| 92 | Repairing & reconditioning of Head Pulley of Conveyor 6A, 3A/3B |
| 93 | Repairing & reconditioning of Crusher shaft (L-3240 mm dia max 235 mm) |
| 94 | Repairing & reconditioning of End disc of Crushers |
| 95 | Repairing & reconditioning of flap gates |
| 96 | Repairing & reconditioning of vibrating screen, grating |
| 97 | Repairing of vibrating screen shafts |
| 98 | Repairing & reconditioning of chuck nut of crusher shaft/screen shaft |
| 99 | Repairing & reconditioning of suspension bar |
| 100 | Making of required sized bore in different couplings of coal handling plant and making required size key way |
| 101 | Replacement of outer shell of various pulleys of different sizes varying length from 1150 to 1600mm and dia 500 to 1200mm |
| 102 | Repairing & reconditioning of pulleys shaft of various pulleys of different sizes varying length from 1150 to 1600mm and dia 500 to 1200mm |
| 103 | Repairing & reconditioning of AMR Coupling |
| 104 | Repairing & reconditioning of Gear Coupling of different conveyor belts |
| 105 | Repairing & reconditioning of fluid Coupling |
| 106 | Repairing & reconditioning of resilient (Resonance) plate of STD 108/STD107 coupling. |
| 107 | Repairing & reconditioning of Screen Bearing housing |
| 108 | Fabrication of suspension assembly of Vibro feeder (Material: EN-8) |
| 109 | Fabrication of Roller forRack and Pinion Gates (Material: EN8) |
| 110 | Fabrication of Flap Gate Shaft size 105mmx2000mmmaterialEN-19 |
| 111 | Fabrication of Shim pack for Crusher (1Set = 50 Nos. of Shims) |
