|
| 1 | Earth work in excavation in foundation, trenches etc. includingdressing of sides and ramming of bottoms, including getting out theexcavated material, refilling after laying pipe/ foundation anddisposal of surplus excavated material at a lead upto 50m suitablesite as per direction of Engineer for following depths, below naturalground / Road top level.In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m |
| 2 | Carriage of earth building material by mechnaical transport including stacking, loding and unloading complete in all respect with lead up to 5 km. |
| 3 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centring and shuttering - All work upto plinthlevel 1:4:8 (1 Cement : 4 fine/ coarse sand : 8 graded stone aggregate 40mm nominal size). |
| 4 | Brick masonry in foundation and plinth with bricks of class designation 75 in : cement mortar 1: 6 (1 cement : 6 coarse sand ) |
| 5 | Halfbrick masonry in foundation & plinth using bricks of designation 75 in: cement mortar 1: 6 (1cement 6 coarse sand) |
| 6 | Random rubble stone masonry For foundation and plinth. IncementSand mortar above 30 cm thick wall in: Cement mortar 1:6 (1-Cement : 6 sand) |
| 7 | Cement plastering including T&P, scaffolding, material and completelabpour, including cost of water, curing, racking of joints etc. with 12mm cement plaster of mix :1:4 (1 cement : 4 fine/ coarse sand) |
| 8 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centring and shuttering - All work upto plinthlevel :1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 9 | Stone slab roofing on ground floor with fine grained stone slab90mm average thickness from approved quarry including filling ofjoints slab in cement sand mortar 1:4 with ceiling pointing in cementsand mortar 1 : 3 complete as per specification for span:Up to 2.00 metre. |
| 10 | Steel work welded in built up sections/ framed work including cutting,hoisting, fixing in position and applying a priming coat of approvedsteel primer using structural steel etc. as required.In stringers, treads, landings etc. of stair cases including use ofchequered plate wherever required, all complete. |
| 11 | Earth work in excavation for roadway, including trimming bottom andside slopes in accordance with requirement of line, grades and crosssections, including disposal of surplus material with all lift and leadupto 1000 metre as per MoRT&H specification clause 301.In all type of soil |
| 12 | Providing, laying, spreading and compacting of granular sub-base byproviding close graded material (Table 400-1), spreading in uniformlayers with motor grader on prepared surface, mixing by mix in placemethod with rotavator at OMC, and compacting with vibratory rollerto achieve the desired density, complete as per MoRT&Hspecification clause - 401 including all material, labour, machinery,lighting, guarding and maintenance of diversion. Grading - III Material |
| 13 | Providing and laying lean cement concrete 1:4:8 in Sub- base over aprepared sub-grade with coarse and fine aggregate conforming toIS: 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement ratio not to exceed 15:1, aggregate gradationafter blending to be as per table 600-1, cement content not to beless than 150 kg/ cum, optimum moisture content to be determinedduring trial length construction, concrete strength not to be less than10 Mpa at 7 days, mixed in concrete mixer, laid manualy,compacted with surface vibrator, finishing and curing complete asper clause 601, 112 of MoRT&H specification including all material,labour, machinery, lighting, guarding and maintenance of diversion. |
| 14 | Providing and laying un-reinforced, dowel jointed, plain cementconcrete mix With Concrete Mixer & vibrator pavement over aprepared sub base with 43 grade cement , coarse and fineaggregate conforming to IS: 383, maximum size of coarse aggregatenot exceeding 25 mm, mixed as per approved mix design, laid,spread, compacted and finished in a continuous operation includingprovision of contraction, expansion, construction and longitudinaljoints, joint filler, separation membrane, sealant primer, joint sealant,debonding strip, admixtures (if required) as approved, curingcompound, finishing to lines and grades complete as per drawingand as per clause 602, 112 of MoRT&H specification including allmaterial, labour, machinery, lighting, guarding and maintenance ofdiversion. PCC M20 |
| 15 | Providing and fixing of 60mm thick precast cement concreteinterlocking paver block casted with rubber moulds in approvedreflective colour and design having minimun compressive strength of300 kg/ sq cm. The CC paving blocks be laid on average 50mmthick bed of coarse sand and the joint is to be filled with fine sand.Laying procedure on compacted sub-base as defined. Complete jobis to be executed as per the instruction of Engineer incharge. Therates to be inclusive of all lead & Lifts etc. complete as perspecifications. |
| 16 | Distempering with 1st quality acrylic washable distemper (readymixed) of approved manufacturer and of required shade and colourcomplete. as per manufacturer\"s specification.32.31.1 Two or more coats on new work. |
| 17 | Providing and fixing 1st quality MAT finished ceremic tile size300x300mm confirming to IS : 13755 and IS : 15622 colour such aswhite, grey, ivory, fume red brown, light green, light blue and otherlight shades in floors, steps, pillars etc. laid on a bed of neat cementslurry finished with flush pointing in the white cement mixed withpigment to match the shade of the tile complete (including the costof cement mortar bed 1:4). |
| 18 | P & F 1st quality Vitrified Porcelain Polished tiles on floor, skirtingand steps etc.in different sizes (thickness to be specified bymanufactuer) with water absortion less than 0.08% and conformingto IS 15622 of approved make in all colour and shade, laid with 20mm thick CM 1 : 4 including grounting the joints with white cementand matching pigment etc complete.27.17.2 Size 600 mm X 600 mm |
| 19 | Providing corrugated G.S. sheet roofing including vertical/ curvedsurface fixed with polymer coated J or L hooks, bolts and nuts 8 mmdiameter with bitumen and G.I. limpet washers or with G.I. limpetwashers filled with white lead and including a coat of approved steelprimer and two coats of approved paint on overlapping of sheetscomplete upto any pitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses and includingcutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275gm/m² |
| 20 | Supplying, erecting and fixing in position specified precast RCCbench made of RCC grade M-30 consisting of 2 Nos. “L” shapedbase support of thickness 100 mm back height 1000mm, front height450 mm, base width 420mm and 5 Nos. RCC planks of size of1500x100 x 50 mm and 1 Nos RCC planks of 150x200x50mmincluding joining all parts with galvanised nuts and bolts of suitablesize. All bolts to be sealed after assembly with nice finish andappearance and level complete in all respect as per direction ofengineer in charge. Every bench should have a manufacture‘s logoof appropriate size Engraved at suitable place. |
| 21 | Painting two coats on specified surface with synthetic enamel paintof approved brand and shade, after thorough cleaning andnecessary filling to give even shade as per clause 803 of MoRT&HSpecification including all material, labour On steel surface |
| 22 | Chequered terrazo tiles 22 mm thick with graded marble chips ofsize up to 6 mm in floors jointed with neat cement slurry mixed withpigment to match the shade of the tiles including rubbing andpolishing complete on 20 mm thick bed of cement mortar 1:4 (1cement :4 coarse sand) :Ordinary cement without any pigment. |
| 23 | Demolishing dry brick pitching in floors, drains etc. including stackingserviceable material and disposal of unserviceable material within 50metres lead : |
