|
| 1 | e-tender for the Renovation,Furnishing and related Works at MalappuramFor more details refer tender documents. |
| 2 | Providing and fixingModular Table of size1800 mm (l) x 750mm (w) x 750 mm (h) Table Top shall be formed out of 25/18 mm thick Pre-laminated Particle Board laminate used for table top with all exposed edges lipped with PVC edge banding. All the exposed surfaces of the table to be finished in approved laminate. (Dpty C) |
| 3 | Providing and fixingSide ReturnTable of size1000 mm (l) x 400mm (w) x 750 mm (h) shall be formed out of 18 mm thickPre- laminated Particle Board laminate used for table topwith all exposed edges lipped with PVC edge banding.CPU Tray will also be provided. One drawer or one cupboard shall be provided.Rates include all materials and labour charges etc(Dpty C) |
| 4 | Providing and fixing wall mount Disply shelf shall be formed out of 18 mm thick Pre- laminated Particle Board laminate used with all exposed edges lipped with PVC edge banding .Rates include all materials and labour charges etc(Dpty C) |
| 5 | Supplying Executive HighBack net chair with hydraulic lifting mechanismand tilt lock, shodded on metal star legs with castors.(Dpty C) |
| 6 | Visitors chair cushion seat(Dpty C) |
| 7 | Wall Fan(Dpty C) |
| 8 | Half door made with compressed wood board with 17 to 25mm thicfixed in the exixiting frame(Dpty C) |
| 9 | Wooden wall partition‐wall partition behind the reception area by using 6mm and 9mm thick bwr plywood laminated with veneer with approved design and pattern(Dpty C) |
| 10 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to whichbut excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board |
| 11 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall/ceilingsurface:Water thinnable cement primer |
| 12 | Wall/ceiling painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Twoor more coats on new work |
| 13 | Electrical works |
| 14 | Providing and fixingModular Table of size1200 mm (l) x 600mm (w) x 750 mm (h) Table Top shall be formed out of 25/18 mm thick Pre-laminated Particle Board laminate used for table top with all exposed edges lipped with PVC edge banding. All the exposed surfaces of the table to be finished in approved laminate. (Dpty C) |
| 15 | Providing and fixingSide ReturnTable of size900 mm (l) x 400mm (w) x 750 mm (h) shall be formed out of 18 mm thickPre- laminated Particle Board laminate used for table topwith all exposed edges lipped with PVC edge banding.CPU Tray will also be provided. One drawer or one cupboard shall be provided.Rates include all materials and labour charges etc(Dpty C) |
| 16 | Applying one coat of water thinnable cement primer of approved brand and manufacture on |
| 17 | Wall/ceiling painting with acrylic emulsion paint of approved brand and manufacture to give an |
| 18 | Window Blinds :Providing and fixing window blinds on each window including cost & conveyance all materials & labour etc.except pantry area |
| 19 | networking and electrical |
| 20 | Visitors chair cushion seat |
| 21 | Wall Fan |
| 22 | Supplying Medium back chair with hydraulic lifting mechanismandlock and shodded on metal star legs with castors. |
| 23 | Supplying and fixingwoodenpartition by covering with 9mm BWR plywood oneither side of 16mm BWR Plywood frame work andall exposed portions of the plywood will be finished |
| 24 | Providing and fixingModular Table of size1200 mm (l) x 600mm (w) x 750 mm (h) Table Top shall be formed out of 25/18 mm thick Pre-laminated Particle Board laminate used for table top with all exposed edges lipped with PVC edge banding. All the exposed surfaces of the table to be finished in approved laminate. |
| 25 | Supplying Medium back chair with hydraulic lifting mechanismandlock and shodded onmetal star legs with castors. |
| 26 | Fabrication door with all fittimngs and installation |
| 27 | Applying one coat of water thinnable cement primer of approved brand and manufacture on |
| 28 | Wall/ceiling painting with acrylic emulsion paint of approved brand and manufacture to give an |
| 29 | networking and electrical works |
| 30 | Window Blinds :Providing and fixing windowblinds on each window including cost & conveyance all materials & labour etc.except pantry area |
| 31 | Providing and fixingModular Table of size1200 mm (l) x 600mm (w) x 750 mm (h) Table Top shall be formed out of 25/18 mm thick Pre-laminated Particle Board laminate used for table top with all exposed edges lipped with PVC edge banding. All the exposed surfaces of the table to be finished in approved laminate. |
| 32 | Supplying Medium back chair with hydraulic lifting mechanismandlock and shodded onmetal star legs with castors. |
| 33 | four seater chair |
| 34 | Window Blinds :Providing and fixing window blinds on each window including cost & conveyanceall materials & labour etc.except pantry area |
| 35 | Wall Fan |
| 36 | Supplying Medium back chair with hydraulic lifting mechanismandlock and shodded onmetal star legs with castors. |
| 37 | visitors chair |
| 38 | Window Blinds :Providing and fixing window blinds on each window including cost & conveyance all materials & labour etc.except pantry area |
| 39 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to whichbut excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board |
| 40 | Half door made with compressed wood board with 17 to 25mm thicfixed in the exixiting frame |
| 41 | Networking and electrical |
| 42 | Mantinance and removing the existing furniture and partition cleaning works |
