|
| 1 | Excavation of pit in ordinary rock which does not require blasting/murrad (in Jodhpur discom) to erect various supports and stay sets including stacking of excavated muck from the edge of excavation/pit. |
| 2 | (B) Lattice Tower /Size of pit |
| 3 | 12.8/12.6 Mtr/ 1.5mx1.5m x2.10 m deep |
| 4 | Safe carriage of steel( fabricated and unfabricated) I.e.M.S. Rails, R.S.Joists, M.S.Channels, M.S.Angles, M.S.Flat, G.I.Stay Sets, G.I. Stay Wire, G.I.Wire Nut & Bolts etc. and ACSR Conductor including loading and unloading and stacking in Nigam store /at work site |
| 5 | Within10 Kms. |
| 6 | Safe Carriage of insulator, hardware, cable etc.including loading/unloading and stacking in Nigam.stores etc. |
| 7 | Within10 Kms. |
| 8 | Safe carriage of fabricated lattice towers structures and sub-station structures type AB, AB beams, isolators structures etc. including loading/unloading and stacking in the Nigam. Stores / at work site. |
| 9 | Within10 Kms. |
| 10 | Safe carriage of breakers/kiosks etc. including loading/ unloading and stacking in Nigam stores |
| 11 | Within 10 KMs. |
| 12 | Erection of all type of steel supports in the excavated pit in alignment after checking the same with plumb line including fixing of cross arms and top hamper before erecting the supports. The support should be grouted and muffed in cement concrete of ratio 1:3:6 as per item No. 5.7 the remaining portion of the pit will be back filled with soil. The nuts & bolts will be provided by the contractor as per Nigam\"s specification for which payment will be made at the prevailing store issue rates. The cost muffing and grouting will be paid extra. |
| 13 | Lattice Structure |
| 14 | Providing and laying of cement concrete in ratio 1:3:6 using 43 grade cement,river sand and 12 mm to 20 mm graded blast crusher broken in pit/foundation according to the size/type of supports/stay set including compaction/curing for 21days in steel plates shuttering /farmer base. |
| 15 | Assembly. Installation & commissioning of gang operated isolating switch on erected structure with setting for accurate operation including fixing of allied accessories completein all respect with post insulator and jumpering on both ends for connection with the system. The nuts and bolts will be supplied by the contractor for which payment will be made as per prevailing Discom store issue rates. |
| 16 | (B)G.O. switch . without earthing blade. |
| 17 | 33kv G.O.switch |
| 18 | Erection of OCB/Kiosk/VCB complete with accessories including use of special tools & conducting all pre-commissioning test before energization,filling oil etc. complete in all respect with erection & grouting of structure (excluding civil works). The relays will be tested by Discom. |
| 19 | 33 KV VCB/SF-6 Breaker |
| 20 | Intallation of 33 KV Cable (XLPE) termination / straight through joints ( Heat shrinkable type) as per manufacturer\"s kit guidance and direction including preparation of cable and testing refilling etc as required.(Including crimping of lugs) |
| 21 | (I) Outdoor end terminal |
| 22 | (ii) 3x240 Sqmm to 3x400 Sq mm |
| 23 | (I) Indoor end termination |
| 24 | (ii) 3x240 Sq mm to 3x400 Sq mm |
| 25 | (i) Straight through joint |
| 26 | (ii) 3x240 Sq mm to 3x400 Sq mm |
| 27 | If the Cable Jointing Kits of HT , LT are not available with Nigam, then the unit officr will obtain NAC from ACOS & the contractor will supply the same as per latest SIR plus 10% (profit) of approved vendors (Amount With 10%) (3X300sqmm S/T Joint) Rate - 10787.76 Rs |
| 28 | Note:- Rate shall be reduced by 20% for \"Push On\" typekit |
| 29 | Laying of 33 KV & 11KV XLPE cable without Road cutting i.e. through burrowing machine \"VERMIER\".(120 cm deep).Use of this technology must be restricted to the situation like:- |
| 30 | (i) When the passages available for laying the proposed cable is totally a metal or cement concrete road. |
| 31 | (ii) When the road cutting is not permitted by the local administration. |
| 32 | A) 33/ 11 KV 3C x 300 Sq.mm cable |
| 33 | For Extra Loop (Ghera) to be provided near the pole on termination point and the length of cable along the pole for mounting of cable jointing kit. |
| 34 | 33 KV Cable:- |
| 35 | 3X240 Sq.mm to 3X400 Sq.mm |
| 36 | Crane with driver and P.O.L(Per Hrs.) |
| 37 | 12 T |
