|
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutters includingchowkhats, architrave, hold fasts etc complete and stcking within 50 m lead. a) Of area 3 Sq.m. and below |
| 2 | Demolishing brick work in cement mortar including stacking of serviceable material anddisposal of unserviceable material within 50 metres lead. |
| 3 | Half brick masonry (with best available local bricks)in Cement mortar 1: 4 (1 cement: 4 coarse sand) in foundation and plinth. |
| 4 | Extra for half brick masonry in superstructure above plinth level and up to floor two level. |
| 5 | 15 mm cement plaster 1 : 6 (1 cement : 6 fine sand) on the rough side of single or half brick wall. |
| 6 | 12 mm cement plaster 1 : 6 (1 cement : 6 fine sand). |
| 7 | Repairs to plaster in patches of 2.50 Sq.m. and under including cutting the patch to proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead.a) With cement mortar 1 : 4 (1 cement : 4 fine sand) |
| 8 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 9 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 10 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matchingpigments etc., complete b) Size of Tile 600x600 mm |
| 11 | Removing dry or oil bound distemper by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 12 | Providing two coats of acrylic water based wall putty/ wall filler of Asian Paits/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the halp of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department. |
| 13 | Wall painting (one or more coats) with plastic emulsion paint of approved brand and manufacture on old work to give an even shade. |
| 14 | Wall painting (two or coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade. |
| 15 | Providing and fixing white vitreous china pedestal type (European type WC pan) water closet with seat and lid with CP brass hinges and rubber buffers, 12.5 Litres white vitreous china low-level flushing cistern with fittings and brackets 40 mm white porcelain in enamel led flush band, 20 mm over flow pipe with specials and mosquito proof coupling of approved municipal design complete including cutting and making good the walls and floors where required.a) WC pan with white plastic seat and lid. |
| 16 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.b) Flat back wash basin size 550x400 mm with single 15 mm CP brass pillar taps of heavy quality. |
| 17 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, includingcutting and making good the walls (internal work).(a) 15 mm dia nominal bore |
| 18 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including trenching and refilling etc (external work) (b) 20 mm dia. nominal bore |
| 19 | Providing and fixing sand cast iron/cast iron(spun) soil, wast and vent pipes (a) 100 mm dia. |
| 20 | Providing and fixing sand cast iron heel rest sanitary bend. (a) 100 mm dia |
| 21 | Providing and fixing sand cast iron single equal plain junction of requireed degree (a) 100x100x100 mm |
| 22 | Providing and fixing C.P. brass long body bib cockof approved quality conforming to IS standards and weighing not less than 690 gms (a) 15 mm nominal bore |
| 23 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS 8931.(a) 15 mm nominal bore |
| 24 | Providing and fixing C.P. brass angle valvefor basin mixer and geyser points of approved quality conforming to IS: 8931(a) 15 mm nominal bore |
| 25 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. a) 15 mm nominal dia. |
| 26 | Providing and fixingCP brass shower rose with 15 mm or 20 mm dia inlet. (b) 150 mm dia. |
| 27 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheets ground fixed to wooden cleadt with CP brass screws and washers |
| 28 | Providing and fixing600x120 mmglass shelf with CP brass bracket and guard rail complete, fixed to wooden cleadts with CP brass screwsedges round and guard rail complete |
| 29 | Providing and fixing CP Brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality). (a) 750 x 20 mm size |
| 30 | Providing and fixing toilet paper holder (a) CP Brass |
| 31 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (b) Flexible pipe (i) 32mm dia |
| 32 | Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete. b) 250 x 16 mm |
| 33 | Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete. c) 150 x 10 mm |
| 34 | Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete. b) 250 x 10 mm |
| 35 | Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete. a) 125 mm |
| 36 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone shingle 40 mm nominal size). |
| 37 | Supplying and fixing glass panes with wooden fillets including removal of broken glass panes and old wooden fillets wherever necessary.b) Glass panes 3 mm thick. |
| 38 | Dismantling wood work of sectional area 40 Sq.cm. and above wrought, framed and fixed in frames, other frames and trusses including stacking the material within 50 m lead. |
| 39 | Dismantling wood work of sectional area below 40 Sq.cm. and above wrought, framed and fixed in frames, other frames and trusses including stacking the material within 50 m lead. |
| 40 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. |
| 41 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory window including necessary iron butt hinges with necessary screws a) 38 mm thick best available local wood, class-B1 |
| 42 | Providing and fixing 2.50 cm thick approved local wood eaves boards 23 cm wide with necessary mouldings etc. |
| 43 | Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position |
| 44 | Painting one or more coats with black Japan paint of approved brand and manufacture to give an even shade. |
| 45 | Painting two coats with oil type wood preservative of approved brand and manufacture on new work. |
| 46 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 47 | Painting (one or more coats) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on old work to give an even shade. |
| 48 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade |
| 49 | Dismantling GI sheet roofing including ridges, hips, valleys and gutters etc and stacking the material within 50 m lead. |
| 50 | Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses. b) 0.63 mm thick GI sheet |
| 51 | Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete b) 0.63 mm thick GI sheet |
| 52 | Applying priming coat redy mixed primer of approved brand and manufacture onsteel work |
| 53 | Painting two or more coats on GI sheets with ready mixed superior paint of approved brand and manufacture on new work to give an even shade. |
| 54 | Painting one or more coats on GI sheets with superior ready mixed paint of approved brand and manufatureon old work to given on even shade. |
| 55 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :a) Kitchen sink with drain board i) 510x1040 mm bowl depth 250 mm |
| 56 | Providing and laying up to floor two level cement 1 : 2 : 4 (1 cement : 2 coarse sand: 4 stone aggregate 20 mm nominal size) including centring shuttering in :a) Kerbs, steps and the like. |
| 57 | PVC Door Frames:- Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer\"s specification and direction of Engineer -in- charge. |
| 58 | Entry / Exit Door Shutters :- Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (± 0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be einforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit beading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturer\"s specification and direction of engineer-in-charge. |
| 59 | Providing and fixing 4.0 mm thick asbestors plain sheet ceiling of approved quality with necessary nails etc. complete (frame work for base to be paid seprately). |
| 60 | Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section withscrews of approved quality for ceiling. a) Best local approved quality wood. |
| 61 | Demolishing RCC work including stacking of steel bars and disposal of un-serviceable materials within 50 metres lead. |
| 62 | Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with M20 ( 1 cement: 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 63 | Reinforcement of RCC work including bending, binding and placing in positioncomplete. b) Tar/TMT steel. |
| 64 | Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap. |
| 65 | Demolishing cement concrete 1 : 4 : 8 or leaner mix including disposal of material within 50 m lead |
