|
| 1 | Painting of the electric pole with 2 coats of aluminum paint over red oxide primer complete in all respects.634 |
| 2 | Labour charge for Lowering and rising of High Mast 30 Mtr and 16 Mtr. etc work complete in all respect.652 LR |
| 3 | S/F of Potted driver Set for LED light suitable for street light and High Mast.complete in all respects.Appd |
| 4 | S/F of Surge protection device(SPD) for treet light and High Mast.complete in all respects.appd |
| 5 | Dismentling / Refixing of LED light after repairing etc .for Street light.1424LR |
| 6 | Supply and laying of aluminium conductor PVC insulated armoured served, sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick stand alround and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Inchange, complete in all respect. The armoring of the cable shall be properly connected with the earthy conductor by clamps etc. 16 sq. mm. 4 core cable. |
| 7 | S&F of 100 A. 415 V Heavy Duty Double Break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect.346 |
| 8 | Supply and fixing of 16M high mast pole of approved makewith rising system hot dip galvanised inside & out sidehaving pole sheet thickness 4mm top dia minimum 150 mm, bottom dia minimum 380mm, base plate 32mm thick, suitable for wind velocity as per IS 875part 3 and having no cercumferential weld with aaccessories for high mast such as head frame suitable for 6 luminaries and its controll gear boxes, 1.5HP Power tool motor, 3 point suspension with steel wire rope 6mm dia double drum winch including making suitable foundation as per manufacture drawing and site requirment along with foundation bolts, nuts, washers, anchor plates etc complete in all respect as per direction and satisfaction to the engineer incharge. |
| 9 | Supply & fixing of factory wired integral LED fiood light luminaires with die cast Aluminium housing built with driver set suitable for 170 to 200 watt. Confiming to IP 66 Protection complete in all respects. lavaur 18700-22000 system lumens high powar LED with lenses >110m/w,PF>0.95THD<10% at Full load CRI>70,Pottde driver set (Not circuitory) Phase to Phase Protection at 440v&>300v auto cut and restart Feature with 5 years warrantee. CAT-AAA |
| 10 | Supply and burying of 40 mm dia. x4.5 metres long G.I. pipe vertically for earthing having 12 mm dia. holes spaced 75 mm apart drilled up to 2 metres from the bottom complete with earthing lead of no. 6 to 8 SWG GI wire in G.I. pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board ,30 cm square C.I. box with hinged cover masonary enclousure funnel at top ,alternate layers of charcoal/ coke and salt at least 150 mm thick alround etc. as per directions of engineer-in-charge complete in all respects as per drawing. |
| 11 | Supply and laying of 25 mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respects. |
| 12 | Supply and fixing of 25 Amp. TPN of automatic street light cubicle control panel paintedwith anty corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case TPN, complete in all respect. |
| 13 | Supply and fixing of single unit LED aviation obstruction light complete with transfarmer and LED spiral etc,complete in all respect. |
| 14 | Supply and laying of aluminium conductor PVC insulated armoured served, sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick stand alround and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Inchange, complete in all respect. The armoring of the cable shall be properly connected with the earthy conductor by clamps etc. 16 sq. mm. 4 core cable.501i |
| 15 | Supply andfixing of brass nickel plated compression gland for PVC insulated and armoredserved sheathed under ground cable i/c rubber ring etc. Complete in all respects. The armoring of the cable shall be properly connected with the earth as per direction of E/ I. 16 Sq mm 4 Core |
| 16 | Supply and fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads insulated with tap and making connection etc. complete in all respect as per directionof E / I.16 Sq mm |
| 17 | S&F of 63 A. 415 V metal clad TPNHRC type fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect. |
| 18 | S&F of 100 A. 415 V metal clad TPNHRC type fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect. |
| 19 | Numbering of Pole 10 cm height letter with Approved brand Paint complete in all Respect. |
| 20 | Supply and fixing of LED Street light Fitting with Mandatory driver set having die cast aluminium body with toughend hlass UV stabilized PC cover and lenses Suitable for110 to 130 watt confirming to IP66 and 1K07 and aboveProtection Having company LOGO Engraved complete in all respect.including labour 13200-15600 system lumens high power LED with lenses,>120 Lm /W,PF>0.95,THD<10% at full load CRI>70,Potted driver set (not circultory),Phase to phase protection at 440V&>300V auto cut and restart feature,4KV Internal Surge Protection with five year Warrantee.Cat AAA. |
