Tender For Repairs To Culvert At W.No.1, Chinnamadathupalayam To Kalliyampudur Road Inperundurai Town Panchayat, Erode District., Perundurai-Tamil Nadu
TDR : 48597858
Tender Notice
BOQ
Expired
Perundurai
Tamil Nadu
Tender For Repairs To Culvert At W.No.1, Chinnamadathupalayam To Kalliyampudur Road Inperundurai Town Panchayat, Erode District.
Name of Work:Repairs to Culvert@ w.no.1, Chinnamadathupalayam to Kalliyampudur Road inPerundurai Town Panchayat, Erode District.
Sl. No.
Item Description
1
Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shale\"s, murram, gravel, stoney earth and earth mixed with small size boulders etc.,as per SS 20 B. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10with standard specifications.
2
Plain Cement Concrete 1:4:8 Mix (one part cement, four part M-sand and eight part of aggregate) using40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with std. specifications. Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.
3
Side wall
4
Slab
5
Cement Concrete 1:2:4 Mix (one part cement,Two part M-sand andFour part of aggregate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.
6
Finishing the top of flooring with Granothatic flooring with cement concrete 1:2:4 (one cement, two M-sand and four aggregate) using 6 to 12mm stone chips – 25mm tk etc.,
7
Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.
8
Reinforced Cement Concrete 1: 1 1/2:3 Mix (One part cement, one point five M-sand andThree part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete with std.Specifications.TNDSS NO: 30 V, VI (S3),VII-3.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
